Skip to content

A Nexus Repository 3 plugin that allows usage of Ansible Galaxy repositories.

Notifications You must be signed in to change notification settings

l3ender/nexus-repository-ansiblegalaxy

Repository files navigation

Nexus Repository Ansible Galaxy Format

Table Of Contents

Getting started

We have detailed instructions on how to get started here!

Developing

View development documentation to get started

Using Ansible Galaxy With Nexus Repository Manager 3

See instructions on how to get started!

Compatibility with Nexus Repository Manager 3 Versions

The table below outlines what version of Nexus Repository the plugin was built against.

Plugin Version Nexus Repository Version
v0.1.0 3.29.1-01
v0.2.0 3.29.1-01
v0.2.1 3.31.0-01
v0.2.2 3.38.0-01 / 3.39.0.01
v0.3.0 >= 3.41.0

If a new version of Nexus Repository is released and the plugin needs changes, a new release will be made, and this table will be updated to indicate which version of Nexus Repository it will function against. This is done on a time available basis, as this is community supported. If you see a new version of Nexus Repository, go ahead and update the plugin and send us a PR after testing it out!

All released versions can be found on the releases page.

Features Implemented In This Plugin

Feature Implemented
Proxy ✔️
Hosted
Group

Supported ansible-galaxy Commands

Proxy

Plugin Version Nexus Repository Version
ansible-galaxy collection install ✔️
ansible-galaxy role install ✔️ *

Be sure to configure the ansible-galaxy client.

* See role installation support.

Installing the plugin

There are a range of options for installing the ansiblegalaxy plugin. You'll need to build it first, and then install the plugin with the options shown below.

Easiest Install

To install the ansiblegalaxy plugin, follow these steps:

  • Download the plugin from the releases page or build from source as described on the development documentation.
  • Copy the nexus-repository-ansiblegalaxy-*-bundle.kar file from the downloaded location (or from target folder, if building from source) to the deploy folder for your Nexus Repository installation.

Once you've done this, go ahead and either restart Nexus Repo, or go ahead and start it if it wasn't running to begin with.

You should now see ansiblegalaxy (proxy) in the available Repository Recipes.

Temporary Install

Installations can be done via the Karaf console and will be wiped out with every restart of Nexus Repository. This is a good installation path if you are just testing or doing development on the plugin.

  • Enable Nexus Repo console: edit <nexus_dir>/bin/nexus.vmoptions and change karaf.startLocalConsole to true.

    More details here: Bundle Development

  • Run Nexus Repo console:

    # sudo su - nexus
    $ cd <nexus_dir>/bin
    $ ./nexus run
    > bundle:install file:///tmp/nexus-repository-ansiblegalaxy-*.jar
    > bundle:list

    (look for org.sonatype.nexus.plugins:nexus-repository-ansiblegalaxy ID, should be the last one)

    > bundle:start <org.sonatype.nexus.plugins:nexus-repository-ansiblegalaxy ID>

(more) Permanent Install

For more permanent installs of the nexus-repository-ansiblegalaxy plugin, follow these instructions:

  • Copy the bundle (nexus-repository-ansiblegalaxy-*.jar) into <nexus_dir>/deploy

This will cause the plugin to be loaded with each restart of Nexus Repository. As well, this folder is monitored by Nexus Repository and the plugin should load within 60 seconds of being copied there if Nexus Repository is running. You will still need to start the bundle using the karaf commands mentioned in the temporary install.

(most) Permanent Install

If you are trying to use the ansiblegalaxy plugin permanently, it makes more sense to do the following:

  • Copy the bundle into <nexus_dir>/system/org/sonatype/nexus/plugins/nexus-repository-ansiblegalaxy/0.2.2/nexus-repository-ansiblegalaxy-0.2.2.jar

  • Make the following additions marked with + to <nexus_dir>/system/org/sonatype/nexus/assemblies/nexus-core-feature/3.x.y/nexus-core-feature-3.x.y-features.xml:

          <feature prerequisite="false" dependency="false">wrap</feature>
    +     <feature prerequisite="false" dependency="false">nexus-repository-ansiblegalaxy</feature>
    

    to the <feature name="nexus-core-feature" description="org.sonatype.nexus.assemblies:nexus-core-feature" version="3.x.y.xy"> section below the last (above is an example, the exact last one may vary).

    And add the following as the last feature:

    + <feature name="nexus-repository-ansiblegalaxy" description="org.sonatype.nexus.plugins:nexus-repository-ansiblegalaxy" version="0.2.2">
    +     <details>org.sonatype.nexus.plugins:nexus-repository-ansiblegalaxy</details>
    +     <bundle>mvn:org.sonatype.nexus.plugins/nexus-repository-ansiblegalaxy/0.2.2</bundle>
    + </feature>
     </features>
    

This will cause the plugin to be loaded and started with each startup of Nexus Repository.

The Fine Print

It is worth noting that this is NOT SUPPORTED by Sonatype, and is a contribution of ours to the open source community (read: you!)

Don't worry, using this community item does not "void your warranty". In a worst case scenario, you may be asked by the Sonatype Support team to remove the community item in order to determine the root cause of any issues.

Remember:

  • Use this contribution at the risk tolerance that you have.
  • Do NOT file Sonatype support tickets related to Ansible Galaxy support in regard to this plugin.
  • DO file issues here on GitHub, so that the community can pitch in.

Getting help

Looking to contribute to our code but need some help? There's a few ways to get information:

Integration Tests

There a still some rough edges around writing integration tests, which are noted below. Please report any problems you find.

The project has a "format" module, and an "IT" module. This allows the "format" module to be bundled up and used by the IT framework classes in the "it" module.

In this project, the sub module nexus-repository-ansiblegalaxy is the "format" module, while the sub modulenexus-repository-ansiblegalaxy-it is the "it" module.

Debugging ITs

You can connect a remote debugger to port 5005 to debug Integration Tests. Just add the -Dit.debug=true argument when running ITs. For example:

mvn clean verify -Dit.debug=true

After the IT starts you would see the following in a terminal:

...
[INFO] --- maven-failsafe-plugin:2.18.1:integration-test (default) @ nexus-repository-...-it ---
...
-------------------------------------------------------
  T E S T S
-------------------------------------------------------
Running org.sonatype.nexus.plugins...

You can then attach a remote debugger to port 5005. Keep trying to attach the remote debugger until the connection succeeds.

After each IT runs, you have to reconnect the remote debugger.

You can run a single IT by adding the -Dit.test=MyIntegrationTestToRunIT property. The example below also skips running the unit tests.

mvn clean verify -Dit.debug=true -Dtest=skip -Dit.test=MyIntegrationTestToRunIT

When running ITs, the Nexus Repository Manager will write log output to the following file:

nexus-repository-ansiblegalaxy/nexus-repository-ansiblegalaxy-it/target/it-data/1/nexus3/log/nexus.log

With multiple ITs, the 1 in the path above will be incremented for each IT.

About

A Nexus Repository 3 plugin that allows usage of Ansible Galaxy repositories.

Resources

Security policy

Stars

Watchers

Forks

Packages

No packages published