DSCP Classify

An nftables based service for applying DSCP classifications to connections, compatible with OpenWrt's firewall4 for dynamically setting DSCP packet marks (this only works in OpenWrt 22.03 and above).

This should be used in conjunction with layer-cake SQM queue with ctinfo configured to restore DSCP on the device ingress. The dscpclassify service uses the last 8 bits of the conntrack mark (0x000000ff).

Classification modes

The service supports three modes for classifying and DSCP marking connections.

User rules

The service will first attempt to classify new connections using rules specified by the user in the config file.
These follow a similar syntax to the OpenWrt firewall config and can match upon source/destination ports and IPs, firewall zones etc.
The rules support the use of nft sets, which could be dynamically updated from external sources such as dsnmasq.

Client DSCP hinting

The service can be configured to apply the DSCP mark supplied by a non WAN originating client.
This function ignores CS6 and CS7 classes to avoid abuse from inappropriately configed LAN clients such as IoT devices.

Dynamic classification

Connections that do not match a pre-specified rule will be dynamically classified by the service via two mechanisms:

• Multi-connection client port detection for detecting P2P traffic
  • These connections are classified as Low Effort (LE) by default and therefore prioritised below Best Effort traffic when using the layer-cake qdisc.
• Multi-threaded service detection for identifying high-throughput downloads from services such as Steam/Windows Update
  • These connections are classified as High-Throughput (AF13) by default and therefore prioritised as follows by cake:
    • diffserv3/4: Equal to besteffort (CS0) traffic.
    • diffserv8: Below besteffort (CS0) traffic, but above low effort (LE) traffic.

External classification

The service will respect DSCP classification stored by an external service in a connection's conntrack bits, this could include services such as netifyd.

Service architecture

Service installation

To install the dscpclassify service via command line you can use the following:

repo="https://raw.githubusercontent.com/ldir-EDB0/dscpclassify/main"
mkdir -p "/etc/dscpclassify.d"
if [ ! -f "/etc/config/dscpclassify" ]; then
    wget "$repo/etc/config/dscpclassify" -O "/etc/config/dscpclassify"
else
    wget "$repo/etc/config/dscpclassify" -O "/etc/config/dscpclassify_git"
fi
wget "$repo/etc/dscpclassify.d/main.nft" -O "/etc/dscpclassify.d/main.nft"
wget "$repo/etc/dscpclassify.d/maps.nft" -O "/etc/dscpclassify.d/maps.nft"
wget "$repo/etc/dscpclassify.d/verdicts.nft" -O "/etc/dscpclassify.d/verdicts.nft"
wget "$repo/etc/hotplug.d/iface/21-dscpclassify" -O "/etc/hotplug.d/iface/21-dscpclassify"
wget "$repo/etc/init.d/dscpclassify" -O "/etc/init.d/dscpclassify"
chmod +x "/etc/init.d/dscpclassify"
/etc/init.d/dscpclassify enable
/etc/init.d/dscpclassify start

SQM should be installed and configured on your device

The OpenWrt guide for configuring this is here https://openwrt.org/docs/guide-user/network/traffic-shaping/sqm

Ingress DSCP marking requires the SQM queue setup script 'layer_cake_ct.qos' and the package 'kmod-sched-ctinfo'.

To install these via command line you can use the following:

repo="https://raw.githubusercontent.com/ldir-EDB0/dscpclassify/main"
opkg update
opkg install kmod-sched-ctinfo
wget "$repo/usr/lib/sqm/layer_cake_ct.qos" -O "/usr/lib/sqm/layer_cake_ct.qos"
wget "$repo/usr/lib/sqm/layer_cake_ct.qos.help" -O "/usr/lib/sqm/layer_cake_ct.qos.help"

Service configuration

The user rules in '/etc/config/dscpclassify' use the same syntax as OpenWrt's firewall config, the 'class' option is used to specified the desired DSCP.

A working default configuration is provided with the service.

The service supports the following global classification options:

Config option	Description	Type	Default
class_bulk	The class applied to threaded bulk clients	string	le
class_high_throughput	The class applied to threaded high-throughput services	string	af13
client_hints	Adopt the DSCP class supplied by a non-WAN client (this exludes CS6 and CS7 classes to avoid abuse)	boolean	1
threaded_client_min_bytes	The total bytes before a threaded client port (i.e. P2P) is classified as bulk	uint	10000
threaded_client_min_connections	The number of established connections for a client port to be considered threaded	uint	10
threaded_service_min_bytes	The total bytes before a threaded service's connection is classed as high-throughput	uint	1000000
threaded_service_min_connections	The number of established connections for a service to be considered threaded	uint	3
lan_device	Manually specify devices that the service should treat as LAN	string
lan_zone	Manually specify firewall zones that the service should treat as LAN	string	lan
wan_device	Manually specify devices that the service should treat as WAN	string
wan_zone	Manually specify firewall zones that the service should treat as WAN	string	wan
wmm	When enabled the service will mark LAN bound packets with DSCP values respective of WMM (RFC-8325)	boolean	0

Below is an example user rule:

config rule
	option name 'DNS'
	list proto 'tcp'
	list proto 'udp'
	list dest_port '53'
	list dest_port '853'
	list dest_port '5353'
	option class 'cs5'
	option counter '0'

The OpenWrt firewall syntax is outlined here https://openwrt.org/docs/guide-user/firewall/firewall_configuration

The counter option can be enabled to count the number of matched connections for a rule.

SQM configuration

The 'layer_cake_ct.qos' queue setup script must be selected for your wan device in SQM setup,

It is important that Squash DSCP and Ignore DSCP on ingress are not enabled in SQM setup otherwise cake will ignore the service's DSCP classes.

Below is a tested working SQM config for use with the service:

Config parameter	Value
qdisc_advanced	1
squash_dscp	0, to ensure cake does not remove ingress packet DSCP values
squash_ingress	0, to ensure cake looks at packet marks on ingress
qdisc_really_really_advanced	1
iqdisc_opts	nat dual-dsthost ingress diffserv4
eqdisc_opts	nat dual-srchost ack-filter diffserv4
script	layer_cake_ct.qos