funding: add min HTLC slots check add channel opening

fundingmanager.go

@@ -3237,6 +3237,36 @@ func (f *fundingManager) handleInitFundingMsg(msg *initFundingMsg) {
 	// SubtractFees=true.
 	capacity := reservation.Capacity()
 
+	// We'll use the current value of the channels and our default policy
+	// to determine of required commitment constraints for the remote
+	// party.
+	chanReserve := f.cfg.RequiredRemoteChanReserve(capacity, ourDustLimit)
+
+	// As a sanity check, we ensure that the user is not trying to open a
+	// tiny anchor channel that would be unusable because of the fee siphon
+	// check we do.
+	if commitType == lnwallet.CommitmentTypeAnchors {
+		timeoutFee := lnwallet.HtlcTimeoutFee(
+			channeldb.AnchorOutputsBit,
+			f.cfg.MaxAnchorsCommitFeeRate,
+		)
+
+		maxNumHtlcs := chanReserve / timeoutFee
+		if maxNumHtlcs < lnwallet.MinAnchorHtlcSlots {
+			if err := reservation.Cancel(); err != nil {
+				fndgLog.Errorf("unable to cancel "+
+					"reservation: %v", err)
+			}
+
+			maxHtlcErr := fmt.Errorf("tiny channel, only room "+
+				"for %d HTLCs. Consider making a larger "+
+				"channel or reducing the max commit fee rate",
+				maxNumHtlcs)
+			msg.err <- maxHtlcErr
+			return
+		}
+	}
+
 	fndgLog.Infof("Target commit tx sat/kw for pendingID(%x): %v", chanID,
 		int64(commitFeePerKw))
 
@@ -3292,11 +3322,6 @@ func (f *fundingManager) handleInitFundingMsg(msg *initFundingMsg) {
 	// request to the remote peer, kicking off the funding workflow.
 	ourContribution := reservation.OurContribution()
 
-	// Finally, we'll use the current value of the channels and our default
-	// policy to determine of required commitment constraints for the
-	// remote party.
-	chanReserve := f.cfg.RequiredRemoteChanReserve(capacity, ourDustLimit)
-
 	fndgLog.Infof("Starting funding workflow with %v for pending_id(%x), "+
 		"committype=%v", msg.peer.Address(), chanID, commitType)
 

lnwallet/commitment.go

@@ -14,29 +14,38 @@ import (
 	"github.com/lightningnetwork/lnd/lnwire"
 )
 
-// anchorSize is the constant anchor output size.
-const anchorSize = btcutil.Amount(330)
-
-// DefaultAnchorsCommitMaxFeeRateSatPerVByte is the default max fee rate in
-// sat/vbyte the initiator will use for anchor channels.
-//
-// This caps the update fee the initiator will send when the anchors channel
-// type is used. We do not limit anything on the receiver side, only on the
-// sender (initiator) side. This keeps us spec compatible, while defaulting to
-// a reasonable feerate if initiator is lnd. Receiver side we will allow any
-// fee and add updates as long as the fee siphon invariant is not violated.
-//
-// Defaults to 10 sat/vbyte. This will make give HTLC a timeout fee of
-//
-// 666 * 2500 / 1000 = 1665 sats
-//
-// An example:
-// For a channel size of 0.01 BTC = 1,000,000 sats and a channel reserve of
-// 1%, this leaves room for (1,000,000 / 100) / 1665 = 6 HTLCs.
-//
-// Bigger channels, larger reserves, or lower fee rates will open up for more
-// room.
-const DefaultAnchorsCommitMaxFeeRateSatPerVByte = 10
+const (
+	// anchorSize is the constant anchor output size.
+	anchorSize = btcutil.Amount(330)
+
+	// DefaultAnchorsCommitMaxFeeRateSatPerVByte is the default max fee
+	// rate in sat/vbyte the initiator will use for anchor channels.
+	//
+	// This caps the update fee the initiator will send when the anchors
+	// channel type is used. We do not limit anything on the receiver side,
+	// only on the sender (initiator) side. This keeps us spec compatible,
+	// while defaulting to a reasonable feerate if initiator is lnd.
+	// Receiver side we will allow any fee and add updates as long as the
+	// fee siphon invariant is not violated.
+	//
+	// Defaults to 10 sat/vbyte. This will make give HTLC a timeout fee of
+	//
+	// 666 * 2500 / 1000 = 1665 sats
+	//
+	// An example:
+	// For a channel size of 0.01 BTC = 1,000,000 sats and a channel
+	// reserve of 1%, this leaves room for (1,000,000 / 100) / 1665 = 6
+	// HTLCs.
+	//
+	// Bigger channels, larger reserves, or lower fee rates will open up
+	// for more room.
+	DefaultAnchorsCommitMaxFeeRateSatPerVByte = 10
+
+	// MinAnchorHtlcSlots is the minimum number of slots we require to be
+	// available for HTLCs when opening an anchor channels and checking fee
+	// leaks. See doc for DefaultAnchorsCommitMaxFeeRateSatPerVByte
+	MinAnchorHtlcSlots = 6
+)
 
 // CommitmentKeyRing holds all derived keys needed to construct commitment and
 // HTLC transactions. The keys are derived differently depending whether the