This project is using a 4 Digit 7 Segment display and a Raspberry Pi pico to create a clock.
To compile this Project you need to configure the Pico SDK, documentation on how to do that can be found here.
The 7 Segment Display I used to build this project and in Fritzing are not the same, I would advise you to use the Datasheet of your 7 Segment Display with the GPIO Layout. Another thing to keep in mind is, that i labeled the first Digit as Digit 0 instead of 1 like the Datasheet did.
| GPIO | Corresponding Function |
|---|---|
| FIRST_GPIO - 1 | Button input |
| FIRST_GPIO + 0 | A |
| FIRST_GPIO + 1 | B |
| FIRST_GPIO + 2 | C |
| FIRST_GPIO + 3 | D |
| FIRST_GPIO + 4 | E |
| FIRST_GPIO + 5 | F |
| FIRST_GPIO + 6 | G |
| FIRST_GPIO + 7 | DP |
| FIRST_GPIO + 8 | Digit 0 |
| FIRST_GPIO + 9 | Digit 1 |
| FIRST_GPIO + 10 | Digit 2 |
| FIRST_GPIO + 11 | Digit 3 |
