Fix label names

MainTel/MainTel-Non-standard-Operations/MTM2-Non-standard-Procedures/Power-cycle-MTM2-cabinet.rst

@@ -26,7 +26,7 @@ Power Cycle MTM2 cabinet
 
 
 
-.. _Title-of-Procedure-Overview:
+.. _Overview:
 
 Overview
 ========
@@ -44,7 +44,7 @@ This procedure is the final option for resolving an MTM2 issue during the night.
 .. :doc:`MTM2 Recovery </MainTel/MainTel-Non-standard-Operations/MTM2-Non-standard-Procedures/MTM2-Non-standard-Procedures-index>`
 .. The correct webpage would be in M2 Troubleshooting so </MainTel/MainTel-Troubleshooting/MTCS-Troubleshooting/M2-Troubleshooting/MTM2-Recovery>`
 
-.. _Title-of-Procedure-Precondition:
+.. _Precondition:
 
 Precondition
 ============
@@ -74,7 +74,7 @@ Precondition
 
 - Know the location of the MTM2 cabinet according its installation, which is either in TMA or on level 3.
 
-.. _Title-of-Procedure-Post-Condition:
+.. _Post-Condition:
 
 Post-Condition
 ==============
@@ -87,7 +87,7 @@ Post-Condition
 - MTMM2 GUI displays no alarms, and MTM2 can transition to a close-loop status.
 
 
-.. _Title-of-Procedure-Procedure-Steps:
+.. _Procedure-Steps:
 
 Procedure Steps
 ===============
@@ -144,12 +144,15 @@ If MTM2 is on level 3
 .. figure:: /MainTel/MainTel-Non-standard-Operations/MTM2-Non-standard-Procedures/_static/pending_cable_power_photo.png
     :name: Cable power photo 
 
+.. _Final-steps:
 
 Final steps:
 ----------------------
 
 Connect the MTM2 control system to MTM2 CSC. Bare in mind that before requesting a connection you must wait for 5 minutes. 
 
+.._Troubleshooting: 
+
 Troubleshooting
 ===============