Skip to content
This repository has been archived by the owner on Aug 12, 2022. It is now read-only.

Releases: lukasz1992/asuswrt-xiaomi

3.0.0.4_382_52401

27 Apr 08:16
Compare
Choose a tag to compare

New release pushed 27.04.2022

Changes:

  • Fix bad sectors handling on Toshiba NAND devices
  • Update firmware for MT7615
  • Update firmware for MT7612 (should solve problem that users are not able to connect after some time)

3.0.0.4_382_52400

30 Mar 08:16
Compare
Choose a tag to compare

New release pushed 30.03.2022

Changes:

  • fix support for repeater
  • add support for OWE (only for devices supporting WPA3)
  • fix security issues with OpenSSL
  • minor tweaks

3.0.0.4_382_52302

25 Nov 11:53
Compare
Choose a tag to compare

New release pushed 2021.11.25 and 2021.12.30

  • Updated MT7612 driver
  • Updated MT7615 driver

3.0.0.4_382_52301

16 Nov 10:06
Compare
Choose a tag to compare

New release pushed 2021.11.16

  • Revert Kr00k fixes to solve frequent disconnections

3.0.0.4_382_52300

04 Nov 16:14
Compare
Choose a tag to compare
3.0.0.4_382_52300 Pre-release
Pre-release

New release pushed 2021.11.04

Changes:

  • updated MT7603 driver
  • reduce WiFi drivers logging
  • some small updates
  • try to fix Kr00k

3.0.0.4_382_52291

22 May 06:55
Compare
Choose a tag to compare

New release pushed 2021.05.22

Changes:

  • Fix wget on devices without USB
  • Remove WDS settings (that do not work with WPA/WPA2/WPA3)
  • Try to improve compatibility with Breed
  • Fix CVE-2021-3448

Image should now boot from 0x200000 (and be compatible with Breed) - need testers with serial access to confirm that

3.0.0.4_382_52290

02 Feb 14:01
Compare
Choose a tag to compare
3.0.0.4_382_52290 Pre-release
Pre-release

New release pushed 2021.02.02

Changes:

  • Security fixes for dnsmasq and minidlna
  • Support for Xiaomi R3P router
  • Exposed settings for transmit power and TxBF
  • Fixed WMM DLS and A-MSDU settings
  • Fixed WiFi scanning
  • Tweaked some defaults

Notes about these defaults:

  • To improve radio speed, 802.11n is required
  • Frameburst was disabled, WMM DLS was enabled
  • Defaults are applied only after factory reset, so I recommend to do a factory reset after upgrading to this release.

3.0.0.4_382_52289

03 Nov 19:52
Compare
Choose a tag to compare

New release updated 2020-11-08

  • Added WPA3 support for RM2100 and R2100 devices
  • Implemented MFP and AES setup for WPA3
  • Fixed BWDPI and Samba

Notes about WPA3:

  • WPS is not supported
  • All modes except AP were not tested
  • MIR3G and MIR4A routers do not support it (because MT76x2 does not support SAE)

3.0.0.4_382_52288

31 Oct 19:24
Compare
Choose a tag to compare

New release based on RT-N18U GPL dump.

  • fixed roaming assistant
  • fixed traffic monitor on RT-MIR4A
  • security updates
  • reduced image size and spam from wireless drivers

Updated 2020-10-31

3.0.0.4_382_52113

11 Jul 14:53
Compare
Choose a tag to compare

Updated 2020-10-06

  • disable Switch Control page (which did not work)
  • remove AI protection (which did not work)
  • fixed Bandwidth Monitor when QoS was disabled
  • enable DFS for Europe region
  • expose 802.11w (mfp) settings
  • fixed not working 40MHz in 20/40MHz mode for MT7603
  • fixed not working 100-116 5Ghz channels and 20MHz bandwidth with channels 116 and 140
  • fixed jffs2 formatting after first flash
  • fixed problem with recognizing apps and Adaptive QoS
  • disable telemetry on dcd
  • introduce support to MIR4A (and MIR3Gv2), Xiaomi RM2100 and R2100
  • fixed issue with Samba passwords
  • fixed Download Manager
  • removed Roaming Assistant