Skip to content

m-kurbanov/AVIC-NEX

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

9 Commits
 
 
 
 
 
 
 
 
 
 

Repository files navigation

AVIC-NEX

A guide and discussion place for modding the AVIC NEX

Slack Status

The contributors to this repository take no liabilty to any damage you may cause to your AVIC NEX by performing methods described here.

#Testmodes Test modes allow you to access many of the internal functions to perform various testing operations and some copying and writing functions.

##Structure The strings for the Testmode contain 3 fields and some optional fileds in the structure:

  1. 3 digit character count of 1st field
  2. 1st field sting
  3. 3 digit character count of 2nd field
  4. 2nd field which is the model name or ALL:
    • ALL
    • KM500
    • NX263
    • NX263A
    • NX264A
    • NX264
    • NX264D
  5. 3 digit character count of 3rd field
  6. 3rd field
  7. Unknown string of: 0082013010100820201230000

##Generation To generate a Testmode file use the following:

perl TestKeys/encode.pl SOME_STRING_DEFINED_BELOW OUTPUTFILE.KEY

##Booting

To boot a Testmode, place a file with the encrypted contents and a name of TESTMODE_A.KEY in the root directory of a USB stick, changing the last letter to match the headers defined below.

Check Order

TestModes are checked in the following order:

  1. TESTMODE_A
  2. TESTMODE_N
  3. TESTMODE_S

Testmodes

The following are all the known testmodes.

###TESTMODE_A Testmode A launches after the deck has fully booted into the Testmode.apk on the device. The settings differ based on the encrypted contents within the TESTMODE_A files.

The following modes are currently known to exist, (but not all of them have booted):

Mode Name Booted Contents To Encrypt
SERVICE Yes 007SERVICE003ALL00833333333007SERVICE0082013010100820201230000
XXTECHNICALXX Yes 013XXTECHNICALXX003ALL00833333333013XXTECHNICALXX0082013010100820201230000
PRODUCT Yes 007PRODUCT003ALL00833333333007PRODUCT0082013010100820201230000
NORMAL No 006NORMAL003ALL00833333333006NORMAL0082013010100820201230000
DIRECT No 006DIRECT003ALL00833333333006DIRECT0082013010100820201230000
AUTO No 004AUTO003ALL00833333333004AUTO0082013010100820201230000

Known functions in each mode:

  1. Direct Mode
    • ProgramFunction
    • ModeChngFunction
    • InitFactoryDefFunction
    • BluetoothFunction
    • VersionInfoFunction
    • ProdInfoFunction
    • GraphicsFunction
    • UsbFunction
  2. Normal Mode
    • VersionInfoFunction
    • ProgramFunction
    • LogFunction
    • FileMaintenanceFunction
    • DriveMaintenceFun
    • InitFactoryDefFunction
    • InitUserArea
    • GyroSensorFunction
    • SelfCheckFunction
    • TouchPanelFunction
    • WirRemoteCtrFunction
    • LearningWiredCtrlFunction
    • PioFunction
    • AsyncSerilPrtFunction
    • RGBIllumiFunction
    • MonitorFunction
    • GraphicsFunction
    • GpsInfoFunction
    • GpsPositionFunction
    • SensorFunction
    • GPSModuleFunction
    • TimeFunction
    • ExtConnInfoFunction
    • TmprtrSnsrFunction
    • FanContFunction
    • FlshRomFunction
    • SdFunction
    • StrgeSdFunction
    • BluetoothFunction
    • BtLineTest
    • TelFunction
    • EchoLSIFunction
    • AVTestFunction
    • IPODTest
    • IpodCertificationFunction
    • AppModeMixFunction
    • SXIFunction
    • HDRadioFunction
    • RdsTmcFunction
    • AudioFunction
    • ProdAudioFunction
    • VideoFunction
    • AutoEQFunction
    • UsbFunction
    • UsbComFunction
    • SystemFunction
    • FlapFunction
    • BackCameraFunction
    • ModeChngFunction
    • ProdInfoFunction
    • WrProInfFunction
    • CCIDWriteFunction
    • TestResult
    • ChngFlgDbgSrilFunction
    • DCDCConverterSynchronization
    • RGBIllumiPWMRegulation
    • RGBIllumiFunction
    • MmoryChckFunction
    • CopyDeviceFun

###TESTMODE_N Testmode N boots from the NORFlash or Recovery. The modes differ based on the encrypted contents within the TESTMODE_N files.

The following boot types and command combinations are known to exist:

Boot Type Command Tested Booted Contents To Encrypt
Recovery AllUpdate Yes Yes 008Recovery003ALL00833333333009AllUpdate0082013010100820201230000
NORFLASH COPYDEVICE No Yes 008NORFLASH003ALL00833333333010COPYDEVICE0082013010100820201230000
NORFLASH MODECHANGE Yes Yes 008NORFLASH003ALL00833333333010MODECHANGE0082013010100820201230000

The following boot types are known to exist:

Boot Type Tested Booted What it does
Recovery Yes Yes Boots the recovery partion on the Internal SD Card
NORFLASH Yes Yes Boots the EasyRecovery Partition stored on the NorFlash (UBoot)

The following commands are known to exist:

Command Tested Booted What it does
AllUpdate Yes Yes Enables you to force an update like a regular NEX Update
COPYDEVICE Yes No Copies an external device directly to the Internal Sd Card (Unsure)
MODECHANGE Yes Yes Changes a mode of somesort (Unsure)

###TESTMODE_S We are unsure what this does except that it reads 1 byte, subtracts 0x31 and then saves that value into the BSP SubMode.

##Known TESTMODE BSP Information The following is a data dump of what the TestMode files do with the BSP.

BSP Side Information

   Magic Number     :0x%08lx(a55a5aa5:Valid, other:Invalid)
0: Boot Mode        :0x%08lx(0:Normal, 1:Recovery, 2:EasyRecovery, 3:Re-EasyRecovery, default:Normal)
1: Launch Mode      :0x%08lx(0:APL, 1:TestMode.apk, 2:Slave TestMode, 3:Boot Error, default:APL)
2: TestMode Sub-Mode:0x%08lx(0:TextMode_A.key,1:Serv Mode,2:Tech Mode,default:TechMode)
3? Bootimage Side   :0x%08lx(0:Side A,        1:Side B,               default:Side A)
4? Recoveryimg Side :0x%08lx(0:Side A,        1:Side B,               default:Side A)
5? Debug Switch     :0x%08lx(0:OFF,           1:ON,                   default:OFF)
6? Usb OTG Switch   :0x%08lx(0:Host,          1:Device,               default:Host)
7? Memchk flag      :0x%08lx(0:No,            1:Yes,                  default:No)
8: Warp boot        :0x%08lx(0:Side A,        1:Side B,               default:Side A)
8? Boot Sub-Mode    :0x%08lx(0:Normal,        1:Catch snapshot,2:Warp,default:Normal)
A: Update flag      :0x%08lx(0:Recovery-Update, 1:uboot update, 2:boot.img update,
                          3:recovery.img update, 4:system.img update,
                          5:opening data update, 6:UI update, 7:All image update,
                          8:TESTMODE_N.KEY, 9:easyrecovery copy,
                          a:easyrecovery copy&verify, b:password key copy&verify,
                          c:easyrecovery mode change,
                    default:Recovery-Update)
B: Update sub-flag    :0x%08lx(0:SD Card,        1:USB1,      2:USB2   default:SD Card)
UI Update  flag    :0x%08lx(0:non-updating,   1:updating,    default:non-updating)
Reserved1  flag    :0x%08lx(default:0xFFFFFFFF)
Reserved2  flag    :0x%08lx(default:0xFFFFFFFF)

###TESTMODE_A

write
1, 1
2, 0
LMode (1, 1, 4 = sizeof) = TestMode.apk
SubMode (2, 0, 4 = sizeof) = TextMode_A.key

###TESTMODE_N

###RecoveryAllUpdate

BMode (0, 1, 4 = sizeof) = BootMode = recovery
SetUpdateFlag (10, 0, 4) = Update flag = 0:Recovery-Update
SetSubUpdateFlag (11, 2, 4) = 0:SD Card

###NORFLASH CopyDevice

BMode (0, 2, 4) = Boot Mode = EasyRecovery
SetUpdateFlag (10, 8, 4) = Update flag = a:easyrecovery copy&verify
SetSubUpdateFlag (11, x, 4) x = device where testfile found

###NORFLASH ChangeMode

BMode (0, 2, 4) = Boot Mode = EasyRecovery
SetUpdateFlag (10, 12, 4) = Update flag = c:easyrecovery mode change

###TESTMODE_S

LMode = 2 (slave testmode)
LMode (1, 2, 4 = sizeof)
SubMode (2, [3,4,5,6 by table], 4 = sizeof)

#Update File Modification The following describes how to modify the update files for your own use.

It is currently unkonwn if the AVIC NEX truely boots the modifications

Any modifications made to the BOOT.img kernel/prg cause the deck to not boot. There is a checksum that we have not yet figured out on the Boot partiton.

##Usage To open up a AVIC NEX Update zip for modificiation perform the following on a Ubuntu Based System:

AVIC x100 Based:

./Firmwares/AVIC.sh firmware.zip 5100 150

AVIC x000 Based:

./Firmwares/AVIC.sh firmware.zip 5000 140

#Cross Update x000 to a x100 The following is how to cross update your x000 AVIC to a x100.

  1. Download the x100 update relating to your model.
  2. Rename all the 150's to 140
  3. Change the root folder from 5100 to 5000
  4. Flash the update

The deck will now belive it is a x100. From now on you will need to use x100 update files without having to do the rename.

If you wish to go back to the x000 do the reverse of the above.

All bluetooth audio is known not to work with this method currently

About

A repo for modding the AVIC NEX

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Shell 88.7%
  • Perl 11.3%