Pi Unifi Controller

This project intend to automatically deploy UniFi Controller v5 to Raspberry Pi.

Prerequisites

A Raspberry Pi provisioned with Raspbian. See Raspberry Quick Start Guide or Quick Start Offline Version

How to setup the Raspberry Pi from OSX

GUI

• Install SD Card Formatter

$ brew cask install sdformatter

• Format SD Card as FAT32 Launch "SD Card Formatter" Choose "Overwrite Format", fill "Volume Label"

• Download Raspbian Image https://www.raspberrypi.org/downloads/raspbian/

• Install Balena Etcher

$ brew cask install balenaetcher

• Install Raspbian image using Balena Etcher Choose Image Choose SD Card drive Flash!

Command Line

• Format SD card as FAT32

$ diskutil list
$ sudo diskutil eraseDisk FAT32 <volume name> MBRFormat /dev/disk<disk# from diskutil>

• Unmount SD card

$ diskutil unmountDisk /dev/disk<disk# from diskutil>

• Copy the data to your SD card

$ sudo dd bs=1m if=image.img of=/dev/disk<disk# from diskutil>

• After the dd command finishes, eject the card

$ sudo diskutil eject /dev/disk<disk# from diskutil>

Configure SSH on Raspbian

https://www.raspberrypi.org/documentation/remote-access/ssh/

• By default, ssh is deactivated on raspbian, to enable it create an empty ssh file at the root of the boot partition

• Find the raspberry with (you can install nmap with macports)

$ sudo nmap -sP <192.168.1 (local network ip)>.0/24

• Ensure to succeed connecting to the default raspberry account using

ssh pi@raspberrypi
password: raspberry 

Usage

Initialize raspberry

• Drop your public ssh key in ssh-keys/files/enabled

• Run prepare.yml playbook with default pi user

  ansible-playbook -i inventories/hosts prepare.yml -e ansible_ssh_user=pi -e ansible_ssh_pass=raspberry

Deploy UniFi Controller

• Run deploy playbook with previously provisioned ansible user.

  ansible-playbook -i inventories/hosts deploy.yml

TODO

• Disable pi user ssh authentication
• Configure firewall
• Configure reverse proxy