Decidim::Msad - Integrate Decidim to Microsoft Active Directory (AD)

A Decidim module to add Microsoft Active Directory (AD) authentication to Decidim as a way to authenticate and authorize the users. Can be integrated to Azure AD or ADFS running on the organization's own server using the SAML authentication flow (SAML 2.0).

This allows Decidim users to log in to Decidim using their organization's Active Directory accounts, which are usually the same accounts they use to log in to their computers. In addition, these users can also be authorized with the data available in the AD server (person's department, location, groups, etc.).

The gem has been developed by Mainio Tech.

Active Directory is a Microsoft product and is not related to this gem in any way, nor do they provide technical support for it. Please contact the gem maintainers in case you find any issues with it.

Installation

Add this line to your application's Gemfile:

gem "decidim-msad"

And then execute:

$ bundle

After installation, you can add the initializer running the following command:

$ bundle exec rails generate decidim:msad:install

You need to set the following configuration options inside the initializer:

:idp_metadata_url - The metadata URL for the identity provider which is the federation server's metadata URL.
- If your ADFS server does not provide a public metadata URL, you can also point to a local file with the :idp_metadata_file option (see below). When using :idp_metadata_file it will get priority over :idp_metadata_url. Only one of these can be used per tenant.
:sp_entity_id - The service provider entity ID, i.e. your applications entity ID used to identify the service at the Active Directory SAML identity provider.
- Set this to the same ID that you use for the metadata sent to the federation server.
- Default: depends on the application's URL, e.g. https://www.example.org/users/auth/msad/metadata

Optionally you can also configure the module with the following options:

:name - The name of the AD provider. Only lowercase characters and underscores are allowed. Defaults to "msad" with only a single tenant. With multiple tenants, each tenant needs to have an individual distinct name.
:auto_email_domain - Defines the auto-email domain in case the user's domain is not stored at the federation server. In case this is not set (default), emails will not be auto-generated and users will need to enter them manually in case the federation server does not report them.
- The auto-generated email format is similar to the following string: msad-756be91097ac490961fd04f121cb9550@example.org. The email will always have the msad- prefix and the domain part is defined by the configuration option.
- In case this is not defined, the organization's host will be used as the default.
:certificate_file - Path to the local certificate included in the metadata sent to the federation server with the service provider metadata. This is optional as Azure AD or ADFS do not force encrypting the SAML assertion data.
:private_key_file - Path to the local private key (corresponding to the certificate). Will be used to decrypt messages coming from the federation server. As the :certificate_file option, this is also optional.
:disable_spslo - A boolean indicating if the service provider initiated SAML logout (SPSLO) should be disabled. ADFS supports SAML sign out only when the sign out requests are signed which requires configuring a certificate and a private key for the ADFS tenant. For Azure AD, this works by default and does not require any extra configuration. By default, this configuration is set to false assuming you want to enable the SAML sign out requests to Azure AD or ADFS when the user signs out of Decidim. In some circumstances you might not want the user to perform a sign out request to the AD federation server.
:metadata_attributes - Defines the SAML attributes that will be stored in the user's associated authorization record's metadata field in Decidim. These are read from the SAML authentication response and stored once the user is identified or a new user record is created. See an example in the initializer file.
:sp_metadata - Extra metadata that you can add to the service provider metadata XML file. See an example in the initializer file.

The install generator will also enable the Active Directory authentication method for OmniAuth by default by adding these lines your config/secrets.yml:

default: &default
  # ...
  omniauth:
    # ...
    msad:
      enabled: false
      metadata_url:
      icon: account-login
development:
  # ...
  omniauth:
    # ...
    msad:
      enabled: true
      metadata_url:
      icon: account-login

This will enable the Active Directory authentication for the development environment only. In case you want to enable it for other environments as well, apply the OmniAuth configuration keys accordingly to other environments as well.

Please also note that you will need to define the metadata URL for the identity provider (the federation server, either Azure AD or ADFS) in order for the integration to work.

The example configuration will set the account-login icon for the the authentication button from the Decidim's own iconset. In case you want to have a better and more formal styling for the sign in button, you will need to customize the sign in / sign up views.

Connecting with multiple tenants

In case you want to integrate with multiple Azure AD or ADFS tenants, you can duplicate the configuration block in the sample configuration as follows:

# First tenant
Decidim::Msad.configure do |config|
  config.name = "msad"
  # => Configuration for the "msad" tenant (copy the sample config here)
end

# Second tenant
Decidim::Msad.configure do |config|
  config.name = "otherad"
  # => Configuration for the "otherad" tenant (copy the sample config here)
end

Please note that in this case you will need to configure an individual name for each tenant. If you fail to do this, you may see obscure error messages when trying to start the server.

You should always begin with a single tenant to get a better understanding of how to configure this module and Azure AD or ADFS. Once you are ready with the first tenant, go ahead and configure another one.

IMPORTANT: The beginning of the tenant names cannot match with each other. Please use fully distinct names for each tenant. Consider the following examples for further instructions:

Correct:
- First tenant: config.name = "msad"
- Second tenant: config.name = "otherad"
Incorrect:
- ~~First tenant: config.name = "msad"~~
- ~~Second tenant: config.name = "msad_other"~~ (the first tenant's name would match with this string when compared from the beginning of the string)

Once configured, please note that for the other tenant the authentication endpoint urls shown in this document need to be modified according to the tenant's name. By default, the tenant name for a single tenant is msad in which case the authentication URLs look as follows:

https://www.example.org/users/auth/msad/***

When you configure the tenant's name to something else than the default, these URLs will change accordingly. With the configuration example above, they would be as follows:

https://www.example.org/users/auth/msad/***
https://www.example.org/users/auth/otherad/***

Configuring the federation server

For configuring the federation server, you will need to send the AD federation server administrator some data from the Decidim's side. After installing the module and configuring your entity ID, possible SP certificate and any additonal SP metadata you want to send, you can send the federation side's administrator the following URL to your instance in order for them to get the necessary data for joining the system at their side:

https://your-organization.org/users/auth/msad/metadata

Change the domain accordingly to your instance and make sure you see an XML file in that URL when you request it. This is the SAML metadata you will need to send to the other side.

After the other side is configured, you can start using the integration at Decidim's side. If you already know the AD federation server's metadata URL in advance, you can already configure it at this point but obviously the sign ins won't work until the federation server is configured correctly. The metadata URLs for the federation servers (either Azure AD or ADFS) should look as follows:

You can configure this URL to the module's :idp_metadata_url configuration as explained previously in this document. Before giving it a try, you of course need to configure the federation side to handle your requests.

If you don't know the metadata URL, please ask it from the federation server administrator after you have sent your service provider (SP) metadata to them. If you don't have a public metadata URL, you can use the :idp_metadata_file option to point to a local metadata file on the Decidim server. Always prefer the public URL because it updates automatically if the server configurations are updated.

Configuring Azure AD

To configure Azure AD, follow these steps:

Go to your Decidim instance's metadata URL (explained previously in this document) and save the metadata XML to a file with the .xml extension on your computer.
In Azure, may be obvious but deploy the Azure AD instance if you haven't done so yet.
Under the Azure Active Directory, go to "Enterprise Applications".
Click "+ New application" and from the top of the view that opens, click "+ Create your own application".
Give the name of your app based on your application's name, e.g. "Your Organization Decidim" and leave the "Integrate any other application you don't find in the gallery" option selected.
Go to the "Single sign-on" tab and select "SAML" as the Select a single sign-on method.
From the top of the view, click "Upload metadata" and pick the Decidim instance's metadata XML file you saved in the beginning. Some of the required properties should be automatically filled but for those fields that are not, define the following (optional):
- Sign on URL: https://your-organization.org/users/auth/msad
- Relay State: https://your-organization.org/
Click "Save" and wait for the configurations to update.
Click "Edit" under the "User Attributes & Claims" section and define the attributes shown in the table below. Leave the "Unique User Identifier (Name ID)" claim untouched unless you know what you are doing.
Once done with the claims, copy the "App Federation Metadata Url" from the "SAML Signing Certificate" section of the Single sign-on view and configure it to the Decidim module's :idp_metadata_url configuration of your Decidim instance as explained in this document. If you don't see the metadata URL in this section, wait for a moment for the application to deploy at Azure.
After the single sign-on configuration, decide if you want to assign users manually to this application or let every user sign in to the application. If you want to provide access to all users in your Azure AD, go to the "Properties" tab of your Enterprise Application and change the "User assignment required?" configuration to "No".
Test that the integration is working correctly.

These are the attributes you will need to configure for the "User Attributes & Claims" section (some of these should be already pre-defined by Azure):

Name	NameSpace	Source	Source attribute
emailaddress	http://schemas.xmlsoap.org/ws/2005/05/identity/claims	Attribute	user.mail
name	http://schemas.xmlsoap.org/ws/2005/05/identity/claims	Attribute	user.userprincipalname
givenname	http://schemas.xmlsoap.org/ws/2005/05/identity/claims	Attribute	user.givenname
surname	http://schemas.xmlsoap.org/ws/2005/05/identity/claims	Attribute	user.surname
displayname	http://schemas.microsoft.com/identity/claims	Attribute	user.displayname

These are the minimum claims to be passed. You can also pass extra claims and store them in the user's authorization metadata as explained in the Customization section of this document. This may be useful e.g. if you want to limit some sections of your service only to specific users using Decidim's action authorizers.

Configuring ADFS

ADFS does not generally undestand the SAML metadata very well and it does not provide any further information about what might be wrong with the SAML metadata XML. Therefore, the metadata you will see in the Decidim's metadata URL will most likely not work when trying to directly import it to ADFS unless you figure out what is missing from it and add it using the :sp_metadata configuration (if you figure it out, do let us know). This seems to be a rather common problem with ADFS using the SAML based relying party trusts.

To configure ADFS, follow these steps:

Open your Decidim instance's metadata url as specified above in order to get the required data from it.
On the ADFS server, open AD FS Management and select "Add Relying Party Trust" under "Relying Party Trusts".
For the data source, select "Enter data about the relying party manually".
For the "Display name" set whatever your instance is called.
For profile, select "AD FS Profile" which allows connecting with SAML.
Bypass the ceritifcate configuration unless you have configured an SP certificate in the module's configuration. Consult the ADFS administrator to get further information about the organization's security policies regarding this.
In the URL configuration, select "Enable support for the SAML 2.0 WebSSO protocol" and provide the following URL as the service URL (modified with your instance's domain): https://your-organization.org/users/auth/msad/callback
In the relying party trust identifier section, add the following URL: https://your-organization.org/users/auth/msad/metadata. Note that if you have customized the SAML entity ID for your instance, use that insted. You should see the correct value from your instance's metadata URL.
In the final step, leave "Open the Edit Claim Rules dialog" checked and proceed to configuring the claims.
Click "Add Rule" and pick "Send LDAP Attributes as Claims" as the claim rule template.
Give the rule name "SAMLAttributes" and configure the values as shown in the table below.
Add a transform rule by selecting "Transform an Incoming Claim" as the claim rule template. For the transform rule, define the following properties:
- Claim rule name: NameID Transform
- Incoming claim type: Name ID
- Outgoing claim type: Name ID
- Outgoing name ID format: Email
- Pass through all claim values
Change the relying party trust secure hash algorithm to SHA-256 under the relying party's "Properties" window's "Advanced" tab.

These are the attributes you will need to configure for the "SAMLAttributes" rule:

LDAP Attribute	Outgoing Claim Type
E-Mail-Addresses	Name ID
E-Mail-Addresses	E-Mail Address
User-Principal-Name	Name
Given-Name	Given Name
Surname	Surname
DisplayName	http://schemas.microsoft.com/identity/claims/displayname

The claims should be passed back to Decidim with the following schema names:

E-Mail Address: http://schemas.xmlsoap.org/ws/2005/05/identity/claims/emailaddress
Name: http://schemas.xmlsoap.org/ws/2005/05/identity/claims/name
Given Name: http://schemas.xmlsoap.org/ws/2005/05/identity/claims/givenname
Surname: http://schemas.xmlsoap.org/ws/2005/05/identity/claims/surname
DisplayName: http://schemas.microsoft.com/identity/claims/displayname

If this is not the case for a reason or another, adjust the "Outgoing Claim Type" to match these values.

These are the minimum claims to be passed. You can also pass extra claims and store them in the user's authorization metadata as explained in the Customization section of this document. This may be useful e.g. if you want to limit some sections of your service only to specific users using Decidim's action authorizers.

After the ADFS side is configured, change the :idp_metadata_url to match the ADFS server's metadata URL if you haven't configured it yet. The format of the URL should look similar to this:

https://adfs.your-organization.org/FederationMetadata/2007-06/FederationMetadata.xml

If your ADFS server is not configured to serve the metadata file publicly, you will need to manually download the metadata file from the server, store it on the Decidim server and then use the :idp_metadata_file option to point the module's tenant configurations to that file.

Debugging the SAML responses

If your ADFS integration is not working properly and you will get login errors, the first thing to check is the SAML response data passed from the ADFS server. To do this, temporarily enable POST data logging on your server in order to inspect the SAML responses from the ADFS server. Once you see the responses in your logs, you can convert them to human readable XML using the following Ruby code:

require "ruby-saml"

idp_metadata_parser = OneLogin::RubySaml::IdpMetadataParser.new
settings = idp_metadata_parser.parse_remote("IDP_METADATA_URL_HERE")
raw_response = CGI.unescape("ENCODED_SAMLRESPONSE_POST_DATA")
response = OneLogin::RubySaml::Response.new(raw_response, { settings: settings })
puts response.document.to_s.inspect

This will print the SAMLResponse in human readable XML for further inspection.

Error: "Authentication failed or cancelled. Please try again."

If you see the SAML StatusCode urn:oasis:names:tc:SAML:2.0:status:InvalidNameIDPolicy in the SAML response data, it can mean that the ADFS server is not passing the SPNameQualifier value as a claim back to the Decidim instance. In order to fix this, add a new claim rule and select "Send Claims Using a Custom Rule". Give the rule name "SPNameQualifier" and define the following in the "Custom rule" field:

c:[Type == "http://schemas.xmlsoap.org/ws/2005/05/identity/claims/emailaddress"]
=> issue(Type = "http://schemas.xmlsoap.org/ws/2005/05/identity/claims/nameidentifier", Issuer = c.Issuer, OriginalIssuer = c.OriginalIssuer, Value = c.Value, ValueType = c.ValueType, Properties["http://schemas.xmlsoap.org/ws/2005/05/identity/claimproperties/format"] = "urn:oasis:names:tc:SAML:1.1:nameid-format:emailAddress", Properties["http://schemas.xmlsoap.org/ws/2005/05/identity/claimproperties/spnamequalifier"] = "YOUR_ENTITY_ID_HERE");

In the rule, replace YOUR_ENTITY_ID_HERE with the entity ID of your instance which should be https://your-organization.org/users/auth/msad/metadata with the default configurations.

Also, you need to configure the email address to be sent as the NameID property as described before. Make sure the NameID passed in the requests is the user's email address.

Alternatively, you could also try to configure a different NameID format from the ADFS side and specify the format for this module using the following configuration in the initializer:

# config/initializers/msad.rb

Decidim::Msad.configure do |config|
  # ... keep the default configuration as is ...
  # Add this extra configuration:
  config.extra = {
    # Specify the actual name identifier format the ADFS server is set to serve.
    # Should be one of the following:
    # - urn:oasis:names:tc:SAML:1.1:nameid-format:emailAddress
    # - urn:oasis:names:tc:SAML:2.0:nameid-format:persistent
    # - urn:oasis:names:tc:SAML:2.0:nameid-format:transient
    # - urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified
    name_identifier_format: "urn:oasis:names:tc:SAML:1.1:nameid-format:emailAddress"
  }
end

Note that the NameID field you configure at the ADFS side is used to uniquely identify the users, so it should be unique per user and at least somewhat permanent for all users.

Error: Sign in attempt failed through MSAD because "Invalid ticket".

In case you see an "Invalid ticket" error durign your login, make sure that you have gone through the previous "Authentication failed or cancelled". After this, check that your entity ID is correct in the custom rule and matches the entity ID you see in the metadata.

Error: The authentication request was not handled within an allowed timeframe. Please try again.

In case you see this error, it could be that your server's and the ADFS server's clocks are not perfectly in sync. You can try allowing clock drift for the module which will accept callback requests within this configured drift. To configure the clock drift, you can define the following "extra" configuration in the initializer:

# config/initializers/msad.rb

Decidim::Msad.configure do |config|
  # ... keep the default configuration as is ...
  # Add this extra configuration:
  config.extra = {
    # Define the allowed clock drift between your server and ADFS (in seconds)
    allowed_clock_drift: 30
  }
end

Error on logout (ADFS): "An Error Occurred"

In case sign in is working properly but sign out is not, it can be because of multiple reasons:

ADFS requires the SAML sign out requests to be signed which is only possible when you have configured the certificate and private key for the tenant. If you don't do this, SP initiated sign out requests are not possible.
The NameID format might be incorrect during the sign out request. If this happens, you can try different formats using the configs.extra options (in particular, the name_identifier_format option explained in the authentication failure error).
- The NameID format needs to match what ADFS is expecting during the sign out request and what is used to sign the user in. Otherwise, this module will use the first NameID format available in the metadata which might not be the correct one.

If you cannot configure the certificate and private key, you can disable the sign out requests completely using the following configuration option:

# config/initializers/msad.rb

Decidim::Msad.configure do |config|
  # ... keep the default configuration as is ...
  # Add this extra configuration:
  config.disable_spslo = true
end

Note that when the SPSLO requests are disabled, the user's session will be left open on the ADFS server. In some circumstances this is desired as the user's browser could be configured to automatically sign the user in with ADFS in which case the sign out request to ADFS would have no effect.

Usage

After the installation and configuration steps, you will need to enable the Active Directory sign in method and authorization from Decidim's system management panel. After enabled, you can start using it.

The Active Directory sign in method shipped with this gem will automatically authorize the user accounts that signed in through AD. In case the users already have an account, they can still authorize their existing accounts using the Active Directory authorization if they want to avoid generating multiple user accounts. This happens from the authorizations section of the user profile pages.

Customization

For some specific needs, you may need to store extra metadata for the Active Directory authorization or add new authorization configuration options for the authorization.

This can be achieved by applying the following configuration to the module inside the initializer described above:

# config/initializers/msad.rb

Decidim::Msad.configure do |config|
  # ... keep the default configuration as is ...
  # Add this extra configuration:
  config.workflow_configurator = lambda do |workflow|
    # When expiration is set to 0 minutes, it will never expire.
    workflow.expires_in = 0.minutes
    workflow.action_authorizer = "CustomMsadActionAuthorizer"
    workflow.options do |options|
      options.attribute :custom_option, type: :string, required: false
    end
  end
  config.metadata_collector_class = CustomMsadMetadataCollector
end

For the workflow configuration options, please refer to the decidim-verifications documentation.

For the custom metadata collector, please extend the default class as follows:

# frozen_string_literal: true

class CustomMsadMetadataCollector < Decidim::Msad::Verification::MetadataCollector
  def metadata
    super.tap do |data|
      # You can access the SAML attributes using the `saml_attributes` accessor
      # which is an instance of `OneLogin::RubySaml::Attributes`. It has the
      # instance methods `#single` for fetching single attributes and `#multi`
      # for fetching attributes that have multiple values.
      computer_model = saml_attributes.single("computer_model")
      unless computer_model.blank?
        # This will actually add the data to the user's authorization metadata
        # hash.
        data[:computer] = "Model: #{computer_model}"
      end
    end
  end
end

Please note that if you don't need to do very customized metadata collection, customizing the metadata collector should not be generally necessary. Instead, you can use the metadata_attributes configuration option which allows you to define the SAML attribute keys and their associated metadata keys to be stored with the user's authorization. Customization of the metadata collector is only necessary in cases where you need to calculate new values or process the original values somehow prior to saving them to the user's metadata.

Contributing

See Decidim.

Testing

To run the tests run the following in the gem development path:

$ bundle
$ DATABASE_USERNAME=<username> DATABASE_PASSWORD=<password> bundle exec rake test_app
$ DATABASE_USERNAME=<username> DATABASE_PASSWORD=<password> bundle exec rspec

Note that the database user has to have rights to create and drop a database in order to create the dummy test app database.

In case you are using rbenv and have the rbenv-vars plugin installed for it, you can add these environment variables to the root directory of the project in a file named .rbenv-vars. In this case, you can omit defining these in the commands shown above.

Test code coverage

If you want to generate the code coverage report for the tests, you can use the SIMPLECOV=1 environment variable in the rspec command as follows:

$ SIMPLECOV=1 bundle exec rspec

This will generate a folder named coverage in the project root which contains the code coverage report.

Localization

If you would like to see this module in your own language, you can help with its translation at Crowdin:

https://crowdin.com/project/decidim-msad

License

See LICENSE-AGPLv3.txt.

Name		Name	Last commit message	Last commit date
Latest commit History 81 Commits
.github/workflows		.github/workflows
app		app
config/locales		config/locales
lib		lib
spec		spec
.gitignore		.gitignore
.rubocop.yml		.rubocop.yml
.rubocop_rails.yml		.rubocop_rails.yml
.rubocop_ruby.yml		.rubocop_ruby.yml
.ruby-version		.ruby-version
.simplecov		.simplecov
Gemfile		Gemfile
Gemfile.lock		Gemfile.lock
LICENSE-AGPLv3.txt		LICENSE-AGPLv3.txt
README.md		README.md
Rakefile		Rakefile
babel.config.json		babel.config.json
crowdin.yml		crowdin.yml
decidim-msad.gemspec		decidim-msad.gemspec
decidim-msad.png		decidim-msad.png

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Decidim::Msad - Integrate Decidim to Microsoft Active Directory (AD)

Installation

Connecting with multiple tenants

Configuring the federation server

Configuring Azure AD

Configuring ADFS

Debugging the SAML responses

Error: "Authentication failed or cancelled. Please try again."

Error: Sign in attempt failed through MSAD because "Invalid ticket".

Error: The authentication request was not handled within an allowed timeframe. Please try again.

Error on logout (ADFS): "An Error Occurred"

Usage

Customization

Contributing

Testing

Test code coverage

Localization

License

About

Releases 1

Packages

Contributors 3

Languages

License

mainio/decidim-module-msad

Folders and files

Latest commit

History

Repository files navigation

Decidim::Msad - Integrate Decidim to Microsoft Active Directory (AD)

Installation

Connecting with multiple tenants

Configuring the federation server

Configuring Azure AD

Configuring ADFS

Debugging the SAML responses

Error: "Authentication failed or cancelled. Please try again."

Error: Sign in attempt failed through MSAD because "Invalid ticket".

Error: The authentication request was not handled within an allowed timeframe. Please try again.

Error on logout (ADFS): "An Error Occurred"

Usage

Customization

Contributing

Testing

Test code coverage

Localization

License

About

Resources

License

Stars

Watchers

Forks

Releases 1

Packages 0

Contributors 3

Languages

Packages