WIP: correct? dir1 #88
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| name: JerryScript CI | |
| on: [push, pull_request] | |
| env: | |
| RUNNER: tools/run-tests.py | |
| jobs: | |
| # Checks: | |
| # runs-on: ubuntu-22.04 # needed for checker version stability | |
| # steps: | |
| # - uses: actions/checkout@v2 | |
| # with: | |
| # fetch-depth: 0 | |
| # - uses: actions/setup-python@v2 | |
| # with: | |
| # python-version: '3.10' | |
| # - run: sudo apt update | |
| # - run: sudo apt install pylint doxygen cppcheck clang-format-15 | |
| # - run: $RUNNER --check-signed-off=gh-actions | |
| # if: ${{ always() }} | |
| # - run: $RUNNER --check-doxygen | |
| # if: ${{ always() }} | |
| # - run: $RUNNER --check-format | |
| # if: ${{ always() }} | |
| # - run: $RUNNER --check-license | |
| # if: ${{ always() }} | |
| # - run: $RUNNER --check-strings | |
| # if: ${{ always() }} | |
| # - run: $RUNNER --check-pylint | |
| # if: ${{ always() }} | |
| # - run: $RUNNER --check-cppcheck | |
| # if: ${{ always() }} | |
| # | |
| # Linux_x86-64_Build_Correctness_Debugger_Tests: | |
| # runs-on: ubuntu-latest | |
| # steps: | |
| # - uses: actions/checkout@v2 | |
| # - uses: actions/setup-python@v4 | |
| # with: | |
| # python-version: '>=3.6' | |
| # - run: $RUNNER -q --jerry-tests | |
| # - run: $RUNNER -q --jerry-tests --build-debug | |
| # - run: $RUNNER -q --jerry-debugger | |
| # - run: $RUNNER -q --jerry-debugger --build-debug | |
| # | |
| # Linux_x86_cpointer-32bit_Build_Correctness_Tests: | |
| # runs-on: ubuntu-latest | |
| # steps: | |
| # - uses: actions/checkout@v2 | |
| # - uses: actions/setup-python@v4 | |
| # with: | |
| # python-version: '>=3.6' | |
| # - run: sudo apt update | |
| # - run: sudo apt install gcc-multilib | |
| # - run: $RUNNER -q --jerry-tests --buildoptions=--compile-flag=-m32,--cpointer-32bit=on | |
| # - run: $RUNNER -q --jerry-tests --buildoptions=--compile-flag=-m32,--cpointer-32bit=on --build-debug | |
| # | |
| # OSX_x86-64_Build_Correctness_Unit_Tests: | |
| # runs-on: macos-latest | |
| # steps: | |
| # - uses: actions/checkout@v2 | |
| # - uses: actions/setup-python@v4 | |
| # with: | |
| # python-version: '>=3.6' | |
| # - run: $RUNNER -q --jerry-tests | |
| # - run: $RUNNER -q --unittests | |
| # | |
| # OSX_x86-64_Build_Correctness_Unit_Tests_Debug: | |
| # runs-on: macos-latest | |
| # steps: | |
| # - uses: actions/checkout@v2 | |
| # - uses: actions/setup-python@v4 | |
| # with: | |
| # python-version: '>=3.6' | |
| # - run: $RUNNER -q --jerry-tests --build-debug | |
| # - run: $RUNNER -q --unittests --build-debug | |
| # | |
| # Linux_x86-64_Build_Option_Tests: | |
| # runs-on: ubuntu-latest | |
| # steps: | |
| # - uses: actions/checkout@v2 | |
| # - uses: actions/setup-python@v4 | |
| # with: | |
| # python-version: '>=3.6' | |
| # - run: sudo apt update | |
| # - run: sudo apt install gcc-multilib | |
| # - run: $RUNNER --buildoption-test | |
| # | |
| # Conformance_Tests_ESNext: | |
| # runs-on: ubuntu-latest | |
| # steps: | |
| # - uses: actions/checkout@v2 | |
| # - uses: actions/setup-python@v4 | |
| # with: | |
| # python-version: '>=3.6' | |
| # - run: $RUNNER --test262 update | |
| # - uses: actions/upload-artifact@v2 | |
| # if: success() || failure() | |
| # with: | |
| # name: Test262-ESNext-results | |
| # path: | | |
| # build/tests/test262_tests_esnext/local/bin/test262.report | |
| # | |
| # Conformance_Tests_ESNext_Debug_A: | |
| # runs-on: ubuntu-latest | |
| # steps: | |
| # - uses: actions/checkout@v2 | |
| # - uses: actions/setup-python@v4 | |
| # with: | |
| # python-version: '>=3.6' | |
| # - run: $RUNNER --test262 update --build-debug --test262-test-list=built-ins,annexB,harness,intl402 | |
| # - uses: actions/upload-artifact@v2 | |
| # if: success() || failure() | |
| # with: | |
| # name: Test262-ESNext-Debug-A-results | |
| # path: | | |
| # build/tests/test262_tests_esnext-debug/local/bin/test262.report | |
| # | |
| # Conformance_Tests_ESNext_Debug_B: | |
| # runs-on: ubuntu-latest | |
| # steps: | |
| # - uses: actions/checkout@v2 | |
| # - uses: actions/setup-python@v4 | |
| # with: | |
| # python-version: '>=3.6' | |
| # - run: $RUNNER --test262 update --build-debug --test262-test-list=language | |
| # - uses: actions/upload-artifact@v2 | |
| # if: success() || failure() | |
| # with: | |
| # name: Test262-ESNext-Debug-B-results | |
| # path: | | |
| # build/tests/test262_tests_esnext-debug/local/bin/test262.report | |
| # | |
| # Unit_Tests: | |
| # runs-on: ubuntu-latest | |
| # steps: | |
| # - uses: actions/checkout@v2 | |
| # - uses: actions/setup-python@v4 | |
| # with: | |
| # python-version: '>=3.6' | |
| # - run: $RUNNER -q --unittests | |
| # - run: $RUNNER -q --unittests --build-debug | |
| # | |
| # Clang_Unit_Build_Option_Tests: | |
| # runs-on: ubuntu-latest | |
| # env: | |
| # CC: clang | |
| # steps: | |
| # - uses: actions/checkout@v2 | |
| # - uses: actions/setup-python@v4 | |
| # with: | |
| # python-version: '>=3.6' | |
| # - run: sudo apt update | |
| # - run: sudo apt install gcc-multilib | |
| # - run: $RUNNER -q --unittests | |
| # # clang has bug in supporting lto | |
| # - run: $RUNNER -q --buildoption-test --buildoptions=--lto=off | |
| # | |
| # ASAN_Tests: | |
| # runs-on: ubuntu-latest | |
| # env: | |
| # ASAN_OPTIONS: detect_stack_use_after_return=1:check_initialization_order=true:strict_init_order=true | |
| # steps: | |
| # - uses: actions/checkout@v2 | |
| # - uses: actions/setup-python@v4 | |
| # with: | |
| # python-version: '>=3.6' | |
| # - run: sudo apt update | |
| # - run: sudo apt install gcc-multilib | |
| # - run: >- | |
| # $RUNNER -q --jerry-tests | |
| # --buildoptions=--stack-limit=0,--compile-flag=-fsanitize=address,--compile-flag=-m32,--compile-flag=-fno-omit-frame-pointer,--compile-flag=-fno-common,--compile-flag=-O2,--debug,--system-allocator=on,--linker-flag=-fuse-ld=gold | |
| # --skip-list=parser-oom.js,parser-oom2.js,stack-limit.js,regression-test-issue-4901.js,regression-test-issue-4848.js,regression-test-issue-4890.js,regression-test-issue-2190.js,regression-test-issue-2258-2963.js,regression-test-issue-2448.js,regression-test-issue-2905.js,regression-test-issue-3785.js,proxy-evil-recursion.js | |
| # | |
| # ASAN_Tests_Debug: | |
| # runs-on: ubuntu-latest | |
| # env: | |
| # ASAN_OPTIONS: detect_stack_use_after_return=1:check_initialization_order=true:strict_init_order=true | |
| # steps: | |
| # - uses: actions/checkout@v2 | |
| # - uses: actions/setup-python@v4 | |
| # with: | |
| # python-version: '>=3.6' | |
| # - run: sudo apt update | |
| # - run: sudo apt install gcc-multilib | |
| # - run: >- | |
| # $RUNNER -q --jerry-tests --build-debug | |
| # --buildoptions=--stack-limit=0,--compile-flag=-fsanitize=address,--compile-flag=-m32,--compile-flag=-fno-omit-frame-pointer,--compile-flag=-fno-common,--compile-flag=-O2,--debug,--system-allocator=on,--linker-flag=-fuse-ld=gold | |
| # --skip-list=parser-oom.js,parser-oom2.js,stack-limit.js,regression-test-issue-4901.js,regression-test-issue-4848.js,regression-test-issue-4890.js,regression-test-issue-2190.js,regression-test-issue-2258-2963.js,regression-test-issue-2448.js,regression-test-issue-2905.js,regression-test-issue-3785.js,proxy-evil-recursion.js | |
| # | |
| # UBSAN_Tests: | |
| # runs-on: ubuntu-latest | |
| # env: | |
| # UBSAN_OPTIONS: print_stacktrace=1 | |
| # steps: | |
| # - uses: actions/checkout@v2 | |
| # - uses: actions/setup-python@v4 | |
| # with: | |
| # python-version: '>=3.6' | |
| # - run: sudo apt update | |
| # - run: sudo apt install gcc-multilib | |
| # - run: >- | |
| # $RUNNER -q --jerry-tests | |
| # --buildoptions=--compile-flag=-fsanitize=undefined,--compile-flag=-m32,--compile-flag=-fno-omit-frame-pointer,--compile-flag=-fno-common,--debug,--system-allocator=on,--linker-flag=-fuse-ld=gold | |
| # --skip-list=parser-oom.js,parser-oom2.js | |
| # - run: >- | |
| # $RUNNER -q --jerry-tests --build-debug | |
| # --buildoptions=--compile-flag=-fsanitize=undefined,--compile-flag=-m32,--compile-flag=-fno-omit-frame-pointer,--compile-flag=-fno-common,--debug,--system-allocator=on,--linker-flag=-fuse-ld=gold | |
| # --skip-list=parser-oom.js,parser-oom2.js | |
| # | |
| # Linux_ARMv7l_Tests: | |
| # runs-on: ubuntu-latest | |
| # env: | |
| # RUNTIME: qemu-arm-static | |
| # TIMEOUT: 300 | |
| # steps: | |
| # - uses: actions/checkout@v2 | |
| # - uses: actions/setup-python@v4 | |
| # with: | |
| # python-version: '>=3.6' | |
| # - run: sudo apt update | |
| # - run: sudo apt install gcc-arm-linux-gnueabihf libc6-dev-armhf-cross qemu-user-static | |
| # - run: >- | |
| # $RUNNER -q --jerry-tests | |
| # --buildoptions=--toolchain=cmake/toolchain_linux_armv7l.cmake,--linker-flag=-static | |
| # | |
| # Linux_ARMv7l_Tests_Debug: | |
| # runs-on: ubuntu-latest | |
| # env: | |
| # RUNTIME: qemu-arm-static | |
| # TIMEOUT: 300 | |
| # steps: | |
| # - uses: actions/checkout@v2 | |
| # - uses: actions/setup-python@v4 | |
| # with: | |
| # python-version: '>=3.6' | |
| # - run: sudo apt update | |
| # - run: sudo apt install gcc-arm-linux-gnueabihf libc6-dev-armhf-cross qemu-user-static | |
| # - run: >- | |
| # $RUNNER -q --jerry-tests --build-debug | |
| # --buildoptions=--toolchain=cmake/toolchain_linux_armv7l.cmake,--linker-flag=-static | |
| # | |
| # Linux_AArch64_Tests: | |
| # runs-on: ubuntu-latest | |
| # env: | |
| # RUNTIME: qemu-aarch64-static | |
| # TIMEOUT: 300 | |
| # steps: | |
| # - uses: actions/checkout@v2 | |
| # - uses: actions/setup-python@v4 | |
| # with: | |
| # python-version: '>=3.6' | |
| # - run: sudo apt update | |
| # - run: sudo apt install gcc-aarch64-linux-gnu libc6-dev-armhf-cross qemu-user-static | |
| # - run: >- | |
| # $RUNNER -q --jerry-tests | |
| # --buildoptions=--toolchain=cmake/toolchain_linux_aarch64.cmake,--linker-flag=-static | |
| # | |
| # Linux_AArch64_Tests_Debug: | |
| # runs-on: ubuntu-latest | |
| # env: | |
| # RUNTIME: qemu-aarch64-static | |
| # TIMEOUT: 300 | |
| # steps: | |
| # - uses: actions/checkout@v2 | |
| # - uses: actions/setup-python@v4 | |
| # with: | |
| # python-version: '>=3.6' | |
| # - run: sudo apt update | |
| # - run: sudo apt install gcc-aarch64-linux-gnu libc6-dev-armhf-cross qemu-user-static | |
| # - run: >- | |
| # $RUNNER -q --jerry-tests --build-debug | |
| # --buildoptions=--toolchain=cmake/toolchain_linux_aarch64.cmake,--linker-flag=-static | |
| MbedOS_K64F_Build_Test: | |
| runs-on: ubuntu-latest | |
| steps: | |
| - uses: actions/checkout@v2 | |
| - uses: actions/setup-python@v4 | |
| with: | |
| python-version: '>=3.6' | |
| - run: sudo apt update | |
| - run: sudo apt install gcc-arm-none-eabi mercurial make git python3-pip python3-setuptools python3-dev python3-venv | |
| - run: make -f ./targets/os/mbedos/Makefile.travis install | |
| - run: make -f ./targets/os/mbedos/Makefile.travis script | |
| # Zephyr_STM32F4_Build_Test: | |
| # runs-on: ubuntu-latest | |
| # steps: | |
| # - uses: actions/checkout@v2 | |
| # - uses: actions/setup-python@v4 | |
| # with: | |
| # python-version: '>=3.6' | |
| # - run: sudo apt update | |
| # - run: sudo apt install gperf dfu-util device-tree-compiler | |
| # - run: make -f ./targets/os/zephyr/Makefile.travis install | |
| # - run: make -f ./targets/os/zephyr/Makefile.travis script | |
| # | |
| # NuttX_STM32F4_Build_Test: | |
| # runs-on: ubuntu-latest | |
| # steps: | |
| # - uses: actions/checkout@v2 | |
| # - uses: actions/setup-python@v4 | |
| # with: | |
| # python-version: '>=3.6' | |
| # - run: sudo apt update | |
| # - run: sudo apt install gcc-arm-none-eabi libnewlib-arm-none-eabi gperf | |
| # - run: make -f ./targets/os/nuttx/Makefile.travis install-noapt | |
| # - run: make -f ./targets/os/nuttx/Makefile.travis script | |
| # | |
| # RIOT_STM32F4_Build_Test: | |
| # runs-on: ubuntu-latest | |
| # env: | |
| # CC: clang | |
| # steps: | |
| # - uses: actions/checkout@v2 | |
| # - run: sudo apt -y install clang gcc-arm-none-eabi | |
| # - run: make -f ./targets/os/riot/Makefile.travis install-noapt | |
| # - run: make -f ./targets/os/riot/Makefile.travis script | |
| # | |
| # ESP8266_RTOS_SDK_Build_Test: | |
| # runs-on: ubuntu-latest | |
| # steps: | |
| # - uses: actions/checkout@v2 | |
| # - uses: actions/setup-python@v4 | |
| # with: | |
| # python-version: '>=3.8' | |
| # - run: make -f ./targets/baremetal-sdk/espressif/esp8266-rtos-sdk/Makefile.travis install-noapt | |
| # - run: make -f ./targets/baremetal-sdk/espressif/esp8266-rtos-sdk/Makefile.travis script | |
| # | |
| # ESP_IDF_Build_Test: | |
| # runs-on: ubuntu-latest | |
| # steps: | |
| # - uses: actions/checkout@v2 | |
| # - uses: actions/setup-python@v4 | |
| # with: | |
| # python-version: '==3.8' | |
| # - run: make -f ./targets/baremetal-sdk/espressif/esp-idf/Makefile.travis install-noapt | |
| # - run: make -f ./targets/baremetal-sdk/espressif/esp-idf/Makefile.travis script | |
| # | |
| # Notification: | |
| # runs-on: ubuntu-latest | |
| # if: false && github.event_name == 'push' && github.repository == 'jerryscript-project/jerryscript' | |
| # steps: | |
| # - uses: rectalogic/notify-irc@v1 | |
| # with: | |
| # channel: '#jerryscript' | |
| # nickname: jerryscript-notification | |
| # message: | | |
| # @${{ github.actor }}: ${{ github.repository }} (${{ github.ref }}#${{ github.sha }}) | |
| # ${{ join(github.event.commits.*.message) }} | |
| # ${{ github.event.compare }} |