Remove support for ACME v1 (#10194)

Fixes #9778

ACME v1 has been fully decommissioned for existing installs on June 1st 2021(see https://community.letsencrypt.org/t/end-of-life-plan-for-acmev1/88430/27), so we can now safely remove it from Synapse.

INSTALL.md

@@ -442,10 +442,7 @@ so, you will need to edit `homeserver.yaml`, as follows:
 
 - You will also need to uncomment the `tls_certificate_path` and
   `tls_private_key_path` lines under the `TLS` section. You will need to manage
-  provisioning of these certificates yourself — Synapse had built-in ACME
-  support, but the ACMEv1 protocol Synapse implements is deprecated, not
-  allowed by LetsEncrypt for new sites, and will break for existing sites in
-  late 2020. See [ACME.md](docs/ACME.md).
+  provisioning of these certificates yourself.
 
   If you are using your own certificate, be sure to use a `.pem` file that
   includes the full certificate chain including any intermediate certificates

README.rst

@@ -142,13 +142,6 @@ the form of::
 As when logging in, you will need to specify a "Custom server".  Specify your
 desired ``localpart`` in the 'User name' box.
 
-ACME setup
-==========
-
-For details on having Synapse manage your federation TLS certificates
-automatically, please see `<docs/ACME.md>`_.
-
-
 Security note
 =============
 

changelog.d/10194.removal

@@ -0,0 +1 @@
+Remove Synapse's support for automatically fetching and renewing certificates using the ACME v1 protocol. This protocol has been fully turned off by Let's Encrypt for existing install on June 1st 2021. Admins previously using this feature should use a [reverse proxy](https://matrix-org.github.io/synapse/develop/reverse_proxy.html) to handle TLS termination, or use an external ACME client (such as [certbot](https://certbot.eff.org/)) to retrieve a certificate and key and provide them to Synapse using the `tls_certificate_path` and `tls_private_key_path` configuration settings.

docker/conf/homeserver.yaml

@@ -7,12 +7,6 @@
 tls_certificate_path: "/data/{{ SYNAPSE_SERVER_NAME }}.tls.crt"
 tls_private_key_path: "/data/{{ SYNAPSE_SERVER_NAME }}.tls.key"
 
-{% if SYNAPSE_ACME %}
-acme:
-    enabled: true
-    port: 8009
-{% endif %}
-
 {% endif %}
 
 ## Server ##

docs/MSC1711_certificates_FAQ.md

@@ -101,15 +101,6 @@ In this case, your `server_name` points to the host where your Synapse is
 running. There is no need to create a `.well-known` URI or an SRV record, but
 you will need to give Synapse a valid, signed, certificate.
 
-The easiest way to do that is with Synapse's built-in ACME (Let's Encrypt)
-support. Full details are in [ACME.md](./ACME.md) but, in a nutshell:
-
- 1. Allow Synapse to listen on port 80 with `authbind`, or forward it from a
-    reverse proxy.
- 2. Enable acme support in `homeserver.yaml`.
- 3. Move your old certificates out of the way.
- 4. Restart Synapse.
-
 ### If you do have an SRV record currently
 
 If you are using an SRV record, your matrix domain (`server_name`) may not
@@ -130,15 +121,9 @@ In this situation, you have three choices for how to proceed:
 #### Option 1: give Synapse a certificate for your matrix domain
 
 Synapse 1.0 will expect your server to present a TLS certificate for your
-`server_name` (`example.com` in the above example). You can achieve this by
-doing one of the following:
-
- * Acquire a certificate for the `server_name` yourself (for example, using
-   `certbot`), and give it and the key to Synapse via `tls_certificate_path`
-   and `tls_private_key_path`, or:
-
- * Use Synapse's [ACME support](./ACME.md), and forward port 80 on the
-   `server_name` domain to your Synapse instance.
+`server_name` (`example.com` in the above example). You can achieve this by acquiring a
+certificate for the `server_name` yourself (for example, using `certbot`), and giving it
+and the key to Synapse via `tls_certificate_path` and `tls_private_key_path`.
 
 #### Option 2: run Synapse behind a reverse proxy
 
@@ -161,10 +146,9 @@ You can do this with a `.well-known` file as follows:
     with Synapse 0.34 and earlier.
 
   2. Give Synapse a certificate corresponding to the target domain
-    (`customer.example.net` in the above example). You can either use Synapse's
-    built-in [ACME support](./ACME.md) for this (via the `domain` parameter in
-    the `acme` section), or acquire a certificate yourself and give it to
-    Synapse via `tls_certificate_path` and `tls_private_key_path`.
+    (`customer.example.net` in the above example). You can do this by acquire a 
+    certificate for the target domain and giving it to Synapse via `tls_certificate_path`
+    and `tls_private_key_path`.
 
  3. Restart Synapse to ensure the new certificate is loaded.
 

docs/sample_config.yaml

@@ -552,13 +552,9 @@ retention:
 # This certificate, as of Synapse 1.0, will need to be a valid and verifiable
 # certificate, signed by a recognised Certificate Authority.
 #
-# See 'ACME support' below to enable auto-provisioning this certificate via
-# Let's Encrypt.
-#
-# If supplying your own, be sure to use a `.pem` file that includes the
-# full certificate chain including any intermediate certificates (for
-# instance, if using certbot, use `fullchain.pem` as your certificate,
-# not `cert.pem`).
+# Be sure to use a `.pem` file that includes the full certificate chain including
+# any intermediate certificates (for instance, if using certbot, use
+# `fullchain.pem` as your certificate, not `cert.pem`).
 #
 #tls_certificate_path: "CONFDIR/SERVERNAME.tls.crt"
 
@@ -609,80 +605,6 @@ retention:
 #  - myCA2.pem
 #  - myCA3.pem
 
-# ACME support: This will configure Synapse to request a valid TLS certificate
-# for your configured `server_name` via Let's Encrypt.
-#
-# Note that ACME v1 is now deprecated, and Synapse currently doesn't support
-# ACME v2. This means that this feature currently won't work with installs set
-# up after November 2019. For more info, and alternative solutions, see
-# https://github.com/matrix-org/synapse/blob/master/docs/ACME.md#deprecation-of-acme-v1
-#
-# Note that provisioning a certificate in this way requires port 80 to be
-# routed to Synapse so that it can complete the http-01 ACME challenge.
-# By default, if you enable ACME support, Synapse will attempt to listen on
-# port 80 for incoming http-01 challenges - however, this will likely fail
-# with 'Permission denied' or a similar error.
-#
-# There are a couple of potential solutions to this:
-#
-#  * If you already have an Apache, Nginx, or similar listening on port 80,
-#    you can configure Synapse to use an alternate port, and have your web
-#    server forward the requests. For example, assuming you set 'port: 8009'
-#    below, on Apache, you would write:
-#
-#    ProxyPass /.well-known/acme-challenge http://localhost:8009/.well-known/acme-challenge
-#
-#  * Alternatively, you can use something like `authbind` to give Synapse
-#    permission to listen on port 80.
-#
-acme:
-    # ACME support is disabled by default. Set this to `true` and uncomment
-    # tls_certificate_path and tls_private_key_path above to enable it.
-    #
-    enabled: false
-
-    # Endpoint to use to request certificates. If you only want to test,
-    # use Let's Encrypt's staging url:
-    #     https://acme-staging.api.letsencrypt.org/directory
-    #
-    #url: https://acme-v01.api.letsencrypt.org/directory
-
-    # Port number to listen on for the HTTP-01 challenge. Change this if
-    # you are forwarding connections through Apache/Nginx/etc.
-    #
-    port: 80
-
-    # Local addresses to listen on for incoming connections.
-    # Again, you may want to change this if you are forwarding connections
-    # through Apache/Nginx/etc.
-    #
-    bind_addresses: ['::', '0.0.0.0']
-
-    # How many days remaining on a certificate before it is renewed.
-    #
-    reprovision_threshold: 30
-
-    # The domain that the certificate should be for. Normally this
-    # should be the same as your Matrix domain (i.e., 'server_name'), but,
-    # by putting a file at 'https://<server_name>/.well-known/matrix/server',
-    # you can delegate incoming traffic to another server. If you do that,
-    # you should give the target of the delegation here.
-    #
-    # For example: if your 'server_name' is 'example.com', but
-    # 'https://example.com/.well-known/matrix/server' delegates to
-    # 'matrix.example.com', you should put 'matrix.example.com' here.
-    #
-    # If not set, defaults to your 'server_name'.
-    #
-    domain: matrix.example.com
-
-    # file to use for the account key. This will be generated if it doesn't
-    # exist.
-    #
-    # If unspecified, we will use CONFDIR/client.key.
-    #
-    account_key_file: DATADIR/acme_account.key
-
 
 ## Federation ##
 

mypy.ini

@@ -176,9 +176,6 @@ ignore_missing_imports = True
 [mypy-josepy.*]
 ignore_missing_imports = True
 
-[mypy-txacme.*]
-ignore_missing_imports = True
-
 [mypy-pympler.*]
 ignore_missing_imports = True
 

synapse/app/_base.py

@@ -289,8 +289,7 @@ async def start(hs: "synapse.server.HomeServer"):
     """
     Start a Synapse server or worker.
 
-    Should be called once the reactor is running and (if we're using ACME) the
-    TLS certificates are in place.
+    Should be called once the reactor is running.
 
     Will start the main HTTP listeners and do some other startup tasks, and then
     notify systemd.