Re-creation for X-Plane 11, of Picton, Ontario, (Camp Picton) Aerodrome c. 1945 under the British Commonwealth Air Training Plan
Aerial View of the Aerodrome and environs
With the approach of WW2 the need for airmen, pilots gunners etc., was dire and prompted the establishment of a network of training bases throughout the commonwealth (including Australia, Canada and New Zealand). This resulted in a massive addition of aircraft facilities in the host countries which persist, for the most part, in some form to today. Though the runways continue to be usable and often regularly used, unfortunately many facilities have fallen in disrepair.
There is a collection of BCATP scenery (Flight Ontario, Al Gay, Grant Wilson) for older flight simulators available (FSX and FS2004 Prepar3d etc.) these have been slow to be promoted to X-Plane (and FS 2021). This project is to I hope remedy this beginning with the base and aerodrome of my long ago hometown of Picton, Ontario, Canada. I hope more will follow.
I was introduced to modern flight simulation with X-Plane and found scenery development quite approachable, first modeling with AC3D and more recently open source Blender. Layout/overlay development has in my hands been with World Editor (WED) and a myriad of open object libraries. BCATP and Wartime architecture is sparse necessitating my learning Blender to develop H-Huts, barracks, hangers (Single, Double and Double-Double) in antique textures. I am learning still, and the more one uses the rich modeling environment which is Blender, the more I realize one will always be in learner mode. The objects are freely available (MIT license) and I hope they represent a quality others will want to use.
The basic layout for Picton, Ontario Canada is part of X-Plane Gateway Airport Scenery packages and has been integrated into the current release itself. The were a number of inaccuracies and necessary use of stock objects for the gateway inclusion, which did not represent well the real layout in Picton. The Addition of homes around the airport is wrong as there is still little development there. The only way to block these I've found is unfortunately to use orthophoto map overlays to cover it over. This involved producing Ortho4XP overlays involving tiles 1, 2, 3, and 4. This coverage is for all of The County area. If only the Picton environs are desired use 3 and 4.
The starting point then is the period buildings and static aircraft. These were modeled from scratch using Blender and textures edited with either Krita or GIMP. The Hangers are typical BCATP Architecture as documented in Mackenzie, (reference 5 below). The huts were more challenging and based on years of photographs so that scale has required constant adjustments.
Some Screenshots
Static aircraft represented rather uncommon examples of British aircraft far from the better known Spitfires and Lancasters. As a result these too were modelled from scratch and these modeling problems are documented elsewhere.
Other BCATP Projects
Flight Ontario, Al Gay, Grant Wilson (ref: bcatp_fs9_01_aug_11.zip)
Not sure of this setting, but it may be Branford ON,
Jacques B(ref:Xplane.org)
- Robertson, Ian S.; Camp Picton, Wartime to Peacetime, County Magazine and Printshop, Bloomfield, 2013.
- Hatch, F. J.; Aerodrome of Democracy: Canada and the British Commonwealth Air Training Plan 1939-1945, Dept of National Defence, Ottawa, 1983.
- Williams, James N.; The Plan: Memories of the BCATP, Canada's Wings Inc, Stittsville, 1984.
- Innes, Graham Buchan; British Airfield Buildings of the Second World War, Midland Publ., 1995.
- MacKenzie, A.; Engineering ‘the aerodrome of democracy’, Canada 1939–1944, in Engineering History and Heritage, 162 August 2009, Issue EH3, Pages 147–155
- Skaarup, Harold A. [numerous books] www.SilverHawkAuthor.com, 2021 August 14 10:51 AM
Support my work via Paypal or Patreon
Acknowledgement: Assistance of Steve Campbell at County Magazine is gratefully acknowledged.