Add support for Gridstream RF protocol from Landis & Gyr meters

README.md

@@ -356,6 +356,9 @@ See [CONTRIBUTING.md](./docs/CONTRIBUTING.md).
     [268]  Bresser Thermo-/Hygro-Sensor Explore Scientific ST1005H
     [269]  DeltaDore X3D devices
     [270]* Quinetic
+    [271]  Landis & Gyr Gridstream Power Meters 9.6k
+    [272]  Landis & Gyr Gridstream Power Meters 19.2k
+    [273]  Landis & Gyr Gridstream Power Meters 38.4k
 
 * Disabled by default, use -R n or a conf file to enable
 

conf/rtl_433.example.conf

@@ -497,6 +497,9 @@ convert si
   protocol 268 # Bresser Thermo-/Hygro-Sensor Explore Scientific ST1005H
   protocol 269 # DeltaDore X3D devices
 # protocol 268 # Quinetic
+  protocol 271 # Landis & Gyr Gridstream Power Meters 9.6k
+  protocol 272 # Landis & Gyr Gridstream Power Meters 19.2k
+  protocol 273 # Landis & Gyr Gridstream Power Meters 38.4k
 
 ## Flex devices (command line option "-X")
 

include/rtl_433_devices.h

@@ -278,6 +278,9 @@
     DECL(bresser_st1005h) \
     DECL(deltadore_x3d) \
     DECL(quinetic) \
+    DECL(gridstream96) \
+    DECL(gridstream192) \
+    DECL(gridstream384) \
 
     /* Add new decoders here. */
 

src/CMakeLists.txt

@@ -134,6 +134,7 @@ add_library(r_433 STATIC
     devices/generic_temperature_sensor.c
     devices/geo_minim.c
     devices/govee.c
+    devices/gridstream.c
     devices/gt_tmbbq05.c
     devices/gt_wt_02.c
     devices/gt_wt_03.c

src/devices/gridstream.c

@@ -0,0 +1,280 @@
+/** @file
+    Decoder for Gridstream RF devices produced by Landis & Gyr.
+
+    Copyright (C) 2023 krvmk
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+ */
+
+/** @fn int gridstream_decode(r_device *decoder, bitbuffer_t *bitbuffer)
+Landis & Gyr Gridstream Power Meters.
+
+- Center Frequency: 915 Mhz
+- Frequency Range: 902-928 MHz
+- Channel Spacing: 100kHz, 300kHz
+- Modulation: FSK-PCM (2-FSK, GFSK)
+- Bitrates: 9600, 19200, 38400
+- Preamble: 0xAAAA
+- Syncword v4: 0b0000000001 0b0111111111
+- Syncword v5: 0b0000000001 0b11111111111
+
+This decoder is based on the information from: https://wiki.recessim.com/view/Landis%2BGyr_GridStream_Protocol
+Datastream is variable length and bitrate depending on type fields
+Preamble
+Bytes after preamble are encoded with standard uart settings with start bit, 8 data bits and stop bit.
+Data layouts:
+    Subtype 55:
+        AAAAAA SSSS TT YY LLLL KK BBBBBBBBBB WWWWWWWWWW II MMMMMMMM KKKK EEEEEEEE KKKK KKKKKK CCCC KKKK XXXX KK
+    Subtype D2:
+        AAAAAA SSSS TT YY LL K----------K XXXX
+    Subtype D5:
+        AAAAAA SSSS TT YY LLLL KK DDDDDDDD EEEEEEEE II K----------K CCCC KKKK XXXX
+- A - Preamble
+- S - Syncword
+- T - Type
+- Y - Subtype
+- L - Length
+- B - Broadcast
+- D - Dest Address
+- E - Source Address
+- M - Uptime (time since last outage in seconds)
+- I - Counter
+- C - Clock
+- K - Unknown
+- X - CRC (poly 0x1021, init set by provider)
+
+*/
+
+#include "decoder.h"
+
+struct crc_init {
+    uint16_t value;
+    char const *location;
+    char const *provider;
+};
+
+/*
+Decoder will iterate through the known values until checksum is validated.
+
+In order to identify new values, the reveng application, https://reveng.sourceforge.io/,
+can determine a missing init value if given several fixed length packet streams.
+Subtype 0x55 with a data length of 0x23 can be used for this.
+
+Known CRC init values can be added to the code via PR when they have been identified.
+
+*/
+static const struct crc_init known_crc_init[] = {
+        {0xe623, "Kansas City, MO", "Evergy-Missouri West"},
+        {0x5fd6, "Dallas, TX", "Oncor"},
+        {0xD553, "Austin, TX", "Austin Energy"},
+        {0x45F8, "Dallas, TX", "CoServ"},
+        {0x62C1, "Quebec, CAN", "Hydro-Quebec"},
+        {0x23D1, "Seattle, WA", "Seattle City Light"},
+        {0x2C22, "Santa Barbara, CA", "Southern California Edison"},
+        {0x142A, "Washington", "Puget Sound Energy"},
+        {0x47F7, "Pennsylvania", "PPL Electric"},
+        {0x22c6, "Long Island, NY", "PSEG Long Island"},
+        {0x8819, "Alameda, CA", "Alameda Municipal Power"},
+        {0x4E2D, "Milwaukee, WI", "We Energies"},
+        {0x1D65, "Phoenix, AZ", "APS"}};
+
+static int gridstream_checksum(int fulllength, uint16_t length, uint8_t *bits, int adjust)
+{
+    uint16_t crc_count = 0;
+    int crc_ok         = 0;
+    uint16_t crc;
+
+    if ((fulllength - 4 + adjust) < length) {
+        return DECODE_ABORT_LENGTH;
+    }
+    crc = (bits[2 + length + adjust] << 8) | bits[3 + length + adjust];
+    do {
+        if (crc16(&bits[4 + adjust], length - 2, 0x1021, known_crc_init[crc_count].value) == crc) {
+            crc_ok = 1;
+        }
+        else {
+            crc_count++;
+        }
+    } while (crc_count < (sizeof(known_crc_init) / sizeof(struct crc_init)) && crc_ok == 0);
+    if (!crc_ok) {
+        return DECODE_FAIL_MIC;
+    }
+    else {
+        return crc_count;
+    }
+}
+
+static int gridstream_decode(r_device *decoder, bitbuffer_t *bitbuffer)
+{
+    data_t *data;
+    uint8_t const preambleV4[] = {
+            0xAA,
+            0xAA,
+            0x00,
+            0x5F,
+            0xF0,
+    };
+    uint8_t const preambleV5[] = {
+            0xAA,
+            0xAA,
+            0x00,
+            0x7F,
+            0xF8,
+    };
+    /* Maximum data length is not yet known, but 256 should be a sufficient buffer size. */
+    uint8_t b[256];
+    uint16_t stream_len;
+    char found_crc[5]           = "";
+    char destwanaddress_str[13] = "";
+    char srcwanaddress_str[13]  = "";
+    char srcaddress_str[9]      = "";
+    char destaddress_str[9]     = "";
+    int srcwanaddress           = 0;
+    uint32_t uptime             = 0;
+    int clock                   = 0;
+    int subtype;
+    unsigned offset;
+    int protocol_version;
+    int subtype_mod = 0;
+    int crcidx;
+    int decoded_len;
+    offset = bitbuffer_search(bitbuffer, 0, 0, preambleV4, 36);
+    if (offset >= bitbuffer->bits_per_row[0]) {
+        offset = bitbuffer_search(bitbuffer, 0, 0, preambleV5, 37);
+        if (offset >= bitbuffer->bits_per_row[0]) {
+            return DECODE_FAIL_SANITY;
+        }
+        else {
+            decoded_len      = extract_bytes_uart(bitbuffer->bb[0], offset + 37, bitbuffer->bits_per_row[0] - offset - 37, b);
+            protocol_version = 5;
+        }
+    }
+    else {
+        decoded_len      = extract_bytes_uart(bitbuffer->bb[0], offset + 36, bitbuffer->bits_per_row[0] - offset - 36, b);
+        protocol_version = 4;
+    }
+    if (decoded_len >= 5) {
+        switch (b[0]) {
+        case 0x2A:
+            subtype = b[1];
+            if (subtype == 0xD2) {
+                stream_len  = b[2];
+                subtype_mod = -1;
+            }
+            else {
+                stream_len = (b[2] << 8) | b[3];
+            }
+            crcidx = gridstream_checksum(decoded_len, stream_len, b, subtype_mod);
+            if (crcidx < 0) {
+                decoder_log(decoder, 1, __func__, "Bad CRC or unknown init value. ");
+                if ((stream_len == 0x23) && (subtype = 0xAA)) {
+                    /* These data types can be used to find new init values. See comment block on line 67. */
+                    decoder_log_bitrow(decoder, 1, __func__, &b[4], decoded_len * 8, "Use RevEng to find init value.");
+                }
+                return DECODE_FAIL_MIC;
+            }
+            sprintf(found_crc, "%04x", known_crc_init[crcidx].value);
+            switch (subtype) {
+            case 0x55:
+                sprintf(destwanaddress_str, "%02x%02x%02x%02x%02x%02x", b[5], b[6], b[7], b[8], b[9], b[10]);
+                sprintf(srcwanaddress_str, "%02x%02x%02x%02x%02x%02x", b[11], b[12], b[13], b[14], b[15], b[16]);
+                srcwanaddress = 1;
+                sprintf(srcaddress_str, "%02x%02x%02x%02x", b[24], b[25], b[26], b[27]);
+                uptime = ((uint32_t)b[18] << 24) | (b[19] << 16) | (b[20] << 8) | b[21];
+                break;
+            case 0xD5:
+                sprintf(destaddress_str, "%02x%02x%02x%02x", b[5], b[6], b[7], b[8]);
+                sprintf(srcaddress_str, "%02x%02x%02x%02x", b[9], b[10], b[11], b[12]);
+                if (stream_len == 0x47) {
+                    clock  = ((uint32_t)b[14] << 24) | (b[15] << 16) | (b[16] << 8) | b[17];
+                    uptime = ((uint32_t)b[22] << 24) | (b[23] << 16) | (b[24] << 8) | b[25];
+                    sprintf(srcwanaddress_str, "%02x%02x%02x%02x%02x%02x", b[30], b[31], b[32], b[33], b[34], b[35]);
+                    srcwanaddress = 1;
+                }
+                break;
+            }
+
+            /* clang-format off */
+            data = data_make(
+                "model",        "",                     DATA_STRING,    "LandisGyr-GS",
+                "networkID",    "Network ID",           DATA_STRING,    found_crc,
+                "location",     "Location",             DATA_STRING,    known_crc_init[crcidx].location,
+                "provider",     "Provider",             DATA_STRING,    known_crc_init[crcidx].provider,
+                "subtype",      "",                     DATA_INT,       subtype,
+                "protoversion", "",                     DATA_INT,       protocol_version,
+                "mic",          "Integrity",            DATA_STRING,    "CRC",
+                "id",           "Source Meter ID",      DATA_COND,      subtype != 0xD2, DATA_STRING, srcaddress_str,
+                "wanaddress",   "Source Meter WAN ID",  DATA_COND,      srcwanaddress == 1, DATA_STRING, srcwanaddress_str,
+                "destaddress",  "Target Meter WAN ID",  DATA_COND,      subtype == 0x55, DATA_STRING, destwanaddress_str,
+                "destaddress",  "Target Meter ID",      DATA_COND,      subtype == 0xD5, DATA_STRING, destaddress_str,
+                "timestamp",    "Timestamp",            DATA_COND,      subtype == 0xD5 && stream_len == 0x47, DATA_INT, clock,
+                "uptime",       "Uptime",               DATA_COND,      uptime > 0, DATA_INT, uptime,
+                NULL);
+            /* clang-format on */
+
+            decoder_output_data(decoder, data);
+            break;
+        }
+        decoder_log_bitrow(decoder, 0, __func__, b, decoded_len * 8, "Decoded frame data");
+        // Return 1 if message successfully decoded
+        return 1;
+    }
+    else {
+        return DECODE_FAIL_SANITY;
+    }
+}
+
+static char const *const output_fields[] = {
+        "model",
+        "networkID",
+        "location",
+        "provider",
+        "id",
+        "subtype",
+        "wanaddress",
+        "destaddress",
+        "uptime",
+        "srclocation",
+        "destlocation",
+        "timestamp",
+        "protoversion",
+        "framedata",
+        "mic",
+        NULL,
+};
+
+r_device const gridstream96 = {
+        .name        = "Landis & Gyr Gridstream Power Meters 9.6k",
+        .modulation  = FSK_PULSE_PCM,
+        .short_width = 104,
+        .long_width  = 104,
+        .reset_limit = 20000,
+        .decode_fn   = &gridstream_decode,
+        .disabled    = 0,
+        .fields      = output_fields,
+};
+
+r_device const gridstream192 = {
+        .name        = "Landis & Gyr Gridstream Power Meters 19.2k",
+        .modulation  = FSK_PULSE_PCM,
+        .short_width = 52,
+        .long_width  = 52,
+        .reset_limit = 20000,
+        .decode_fn   = &gridstream_decode,
+        .disabled    = 0,
+        .fields      = output_fields,
+};
+
+r_device const gridstream384 = {
+        .name        = "Landis & Gyr Gridstream Power Meters 38.4k",
+        .modulation  = FSK_PULSE_PCM,
+        .short_width = 22,
+        .long_width  = 22,
+        .reset_limit = 20000,
+        .decode_fn   = &gridstream_decode,
+        .disabled    = 0,
+        .fields      = output_fields,
+};