[Detection Sensor Module] prevent spamming default channel. #10831
gjelsoemain_matrix.yml
on: pull_request_target
Matrix: setup
package-native
/
...
/
build-native
1m 58s
package-raspbian-armv7l
/
...
/
build-raspbian-armv7l
2m 17s
package-raspbian
/
...
/
build-raspbian
4m 2s
Matrix: build-esp32-c3
Matrix: build-esp32-c6
Matrix: build-esp32-s3
Matrix: build-esp32
Matrix: build-nrf52
Matrix: build-rpi2040
Matrix: build-stm32
Matrix: check
package-raspbian-armv7l
/
package-raspbian_armv7l
0s
Matrix: gather-artifacts
after-checks
3s
Matrix: release-firmware
Annotations
20 errors and 3 warnings
|
package-native / build-native / build-native
Process completed with exit code 1.
|
|
package-raspbian-armv7l / build-raspbian_armv7l / build-raspbian-armv7l
Process completed with exit code 1.
|
|
build-stm32 (rak3172) / build-stm32
Process completed with exit code 1.
|
|
build-stm32 (wio-e5) / build-stm32
Process completed with exit code 1.
|
|
build-nrf52 (feather_diy) / build-nrf52
Process completed with exit code 1.
|
|
build-nrf52 (canaryone) / build-nrf52
Process completed with exit code 1.
|
|
build-nrf52 (rak4631_eth_gw) / build-nrf52
Process completed with exit code 1.
|
|
package-raspbian / build-raspbian / build-raspbian
Process completed with exit code 1.
|
|
build-esp32 (tbeam) / build-esp32
Process completed with exit code 1.
|
|
build-rpi2040 (feather_rp2040_rfm95) / build-rpi2040
Process completed with exit code 1.
|
|
build-esp32 (rak11200) / build-esp32
Process completed with exit code 1.
|
|
build-esp32-c3 (heltec-ht62-esp32c3-sx1262) / build-esp32-c3
Process completed with exit code 1.
|
|
build-esp32-c6 (tlora-c6) / build-esp32-c6
Process completed with exit code 1.
|
|
build-rpi2040 (rp2040-lora) / build-rpi2040
Process completed with exit code 1.
|
|
build-esp32-s3 (heltec-wireless-paper) / build-esp32-s3
Process completed with exit code 1.
|
|
build-esp32-c3 (heltec-hru-3601) / build-esp32-c3
Process completed with exit code 1.
|
|
build-rpi2040 (picow) / build-rpi2040
Process completed with exit code 1.
|
|
build-esp32 (m5stack-coreink) / build-esp32
Process completed with exit code 1.
|
|
build-esp32-s3 (unphone) / build-esp32-s3
Process completed with exit code 1.
|
|
build-esp32-s3 (t-deck) / build-esp32-s3
Process completed with exit code 1.
|
|
package-raspbian-armv7l / build-raspbian_armv7l / build-raspbian-armv7l
This job failure may be caused by using an out of date self-hosted runner. You are currently using runner version 2.319.1. Please update to the latest version 2.320.0
|
|
build-stm32 (wio-e5) / build-stm32
This job failure may be caused by using an out of date self-hosted runner. You are currently using runner version 2.319.1. Please update to the latest version 2.320.0
|
|
package-raspbian / build-raspbian / build-raspbian
This job failure may be caused by using an out of date self-hosted runner. You are currently using runner version 2.319.1. Please update to the latest version 2.320.0
|