Before you start, please take note of these warnings and comments:
- N.B. Make sure you are on lxplus6 or otherwise using an SLC6 machine. Make sure SCRAM_ARCH is slc6_amd64_gcc491 (or later for 80X).
- N.B. The setup script will check out many packages and take a while!
- N.B. You can ignore "error: addinfo_cache" lines.
- N.B. This is to set up the latest area in a self-consistent way. If you want a particular flashgg version corresponding to other samples, please see https://twiki.cern.ch/twiki/bin/viewauth/CMS/FLASHggFramework#Instructions_for_users
Currently two releases are supported:
- 8_0_28 for Legacy 2016 processing
- 9_4_9, version for 2017 v2 processing and met corrections, recipe still being developed
Recently deprecated:
- 9_2_8
80X: Get everything you need, starting from a clean area:
- WARNING (24 April) this does not currently compile, due to increasing divergence of code with 94X. A new branch will be provided within 1 week.
cmsrel CMSSW_8_0_28
cd CMSSW_8_0_28/src
cmsenv
git cms-init
cd $CMSSW_BASE/src
git clone https://github.com/cms-analysis/flashgg flashgg
source flashgg/setup_8_0_X.sh
94X: Get everything you need, starting from a clean area:
cmsrel CMSSW_9_4_9
cd CMSSW_9_4_9/src
cmsenv
git cms-init
cd $CMSSW_BASE/src
git clone https://github.com/cms-analysis/flashgg flashgg
source flashgg/setup_9_4_X.sh
If everything now looks reasonable, you can build:
cd $CMSSW_BASE/src
scram b -j 3
In 94X after building you need to run:
source flashgg/afterbuild_9_4_X.sh
And a very basic workflow test:
cd $CMSSW_BASE/src/flashgg
cmsRun MicroAOD/test/microAODstd.py processType=sig datasetName=glugluh # or processType=data depending on input file
cmsRun Taggers/test/simple_Tag_test.py
cmsRun Taggers/test/diphotonsDumper_cfg.py
cmsRun Systematics/test/workspaceStd.py processId=ggh_125 doHTXS=1
These are just some test examples; the first makes MicroAOD from a MiniAOD file accessed via xrootd, the second produces tag objects and screen output from the new MicroAOD file, and the other two process the MicroAOD file to test ntuple and workspace output.
The setup code will automatically change the initial remote branch's name to upstream to synchronize with the project's old conventions.
The code will also automatically create an "origin" repo based on its guess as to where your personal flashgg fork is.
Check that this has worked correctly if you have trouble pushing. (See setup_*.sh for what it does.)