Fix nonvolatile context restoration (dotnet#101709)

* Fix nonvolatile context restoration

There is a possibility of a race between the
ClrRestoreNonVolatileContext and an async signal handling (like
the one we use for runtime suspension). If the signal kicks in after
we've loaded Rsp, but before we jumped to the target address, the
context we are loading the registers from could get overwritten by the
signal handler stack. So the ClrRestoreNonVolatileContext would end up
jumping into a wrong target address.

The fix is to load the target address into a register before loading the
Rsp and then jumping using the register.

* Fix arm and x86

src/coreclr/pal/src/arch/arm/context2.S

@@ -160,25 +160,28 @@ LOCAL_LABEL(Restore_CONTEXT_FLOATING_POINT):
     ldr R2, [r0, #(CONTEXT_Cpsr)]
     msr APSR, r2
 
-    // Ideally, we would like to use `ldmia r0, {r0-r12, sp, lr, pc}` here,
-    // but clang 3.6 and later, as per ARM recommendation, disallows using
-    // Sp in the register list, and Pc and Lr simultaneously.
-    // So we are going to use the IPC register r12 to copy Sp, Lr and Pc
-    // which should be ok -- TODO: Is this really ok?
+    ldr r1, [r0, #(CONTEXT_Sp)]
+    ldr r2, [r0, #(CONTEXT_Pc)]
+    str r2, [r1, #-4]
+    ldr r2, [r0, #(CONTEXT_R12)]
+    str r2, [r1, #-8]
     add r12, r0, CONTEXT_R0
     ldm r12, {r0-r11}
-    ldr sp, [r12, #(CONTEXT_Sp - (CONTEXT_R0))]
     ldr lr, [r12, #(CONTEXT_Lr - (CONTEXT_R0))]
-    ldr pc, [r12, #(CONTEXT_Pc - (CONTEXT_R0))]
+    ldr r12, [r12, #(CONTEXT_Sp - (CONTEXT_R0))]
+    sub r12, r12, #8
+    mov sp, r12
+    pop {r12, pc}
 
 LOCAL_LABEL(No_Restore_CONTEXT_INTEGER):
 
     ldr r2, [r0, #(CONTEXT_Cpsr)]
     msr APSR, r2
 
-    ldr sp, [r0, #(CONTEXT_Sp)]
     ldr lr, [r0, #(CONTEXT_Lr)]
-    ldr pc, [r0, #(CONTEXT_Pc)]
+    ldr r2, [r0, #(CONTEXT_Pc)]
+    ldr sp, [r0, #(CONTEXT_Sp)]
+    bx r2
 
 LOCAL_LABEL(No_Restore_CONTEXT_CONTROL):
     ldr r2, [r0, #(CONTEXT_ContextFlags)]

src/coreclr/pal/src/arch/i386/context2.S

@@ -115,11 +115,12 @@ LOCAL_LABEL(Done_Restore_CONTEXT_FLOATING_POINT):
     movdqu xmm7, [eax + CONTEXT_Xmm7]
 LOCAL_LABEL(Done_Restore_CONTEXT_EXTENDED_REGISTERS):
 
-    // Restore Stack
-    mov   esp, [eax + CONTEXT_Esp]
-
     // Create a minimal frame
-    push  DWORD PTR [eax + CONTEXT_Eip]
+    mov   ebx, [eax + CONTEXT_Esp]
+    mov   ecx, [eax + CONTEXT_Eip]
+    mov   edx, [eax + CONTEXT_Eax]
+    mov   [ebx - 4], ecx
+    mov   [ebx - 8], edx
 
     // Restore register(s)
     mov   ebp, [eax + CONTEXT_Ebp]
@@ -128,7 +129,13 @@ LOCAL_LABEL(Done_Restore_CONTEXT_EXTENDED_REGISTERS):
     mov   edx, [eax + CONTEXT_Edx]
     mov   ecx, [eax + CONTEXT_Ecx]
     mov   ebx, [eax + CONTEXT_Ebx]
-    mov   eax, [eax + CONTEXT_Eax]
+
+    // Restore Stack
+    mov   eax, [eax + CONTEXT_Esp]
+    sub   eax, 8
+    mov   esp, eax
+
+    pop   eax
 
     // Resume
     ret

src/coreclr/vm/amd64/Context.S

@@ -51,8 +51,9 @@ NESTED_ENTRY ClrRestoreNonvolatileContextWorker, _TEXT, NoHandler
         // exception handling, iret and ret can't be used because their shadow stack enforcement would not allow that transition,
         // and using them would require writing to the shadow stack, which is not preferable. Instead, iret is partially
         // simulated.
+        mov     rax, [r10 + OFFSETOF__CONTEXT__Rip]
         mov     rsp, [r10 + OFFSETOF__CONTEXT__Rsp]
-        jmp     qword ptr [r10 + OFFSETOF__CONTEXT__Rip]
+        jmp     rax
     Done_Restore_CONTEXT_CONTROL:
 
         // The function was not asked to restore the control registers so we return back to the caller

src/coreclr/vm/amd64/Context.asm

@@ -63,8 +63,9 @@ NESTED_ENTRY ClrRestoreNonvolatileContextWorker, _TEXT
         mov     eax, [r10 + OFFSETOF__CONTEXT__EFlags]
         push    rax
         popfq
+        mov     rax, [r10 + OFFSETOF__CONTEXT__Rip]
         mov     rsp, [r10 + OFFSETOF__CONTEXT__Rsp]
-        jmp     qword ptr [r10 + OFFSETOF__CONTEXT__Rip]
+        jmp     rax
     Done_Restore_CONTEXT_CONTROL:
     
         ; The function was not asked to restore the control registers so we return back to the caller