MMM-xiaomi

Additional Module for MagicMirror² https://github.com/MichMich/MagicMirror/

Module: MMM-xiaomi

This module displays data from your Xiaomi smart home sensors (temperature, humidity, window state, light state). It also calculates recommended ventilation for your indoor rooms in case the humidity exceed 60%. This requires an outside sensor to take into account the outside humidity and temperature.

Iconography:

• A refresh icon indicates that ventilation is recommended (above 60% humidity)
• A star icon indicates that a window/door is currently open in the room
• A power icon indicates that a light is currently switched on
• A fire icon indicates that heating is active

If you use the MAX! heating system you can install my other module MMM-max and include heating indication in this module as well.

Installation

1. Navigate into your MagicMirror's modules folder and execute git clone https://github.com/mirko3000/MMM-xiaomi.git. A new folder will appear, navigate into it.
2. Execute npm install

Using the module

To use this module, add it to the modules array in the config/config.js file:

modules: [
    {
		module: 'MMM-xiaomi',
		position: 'bottom_left',
		header: 'Temperature / Humidity',  // This is optional
		config: {
			// See 'Configuration options' for more information.
		}
	},

]

Configuration options

The following properties can be configured:

Option	Description
gatewayIP	The IP address of your Xiaomi smarthome gateway. Possible values: 192.168.1.100 Default value: 192.168.0.1 This value is mandatory
gatewayToken	The optional authentification token for your gateway in case your device does not allow direct access. Possible values: cfbdb215c0824fcc971917e36822fcbe Default value: none This value is optional.
animationSpeed	The animation speed on refreshing data. Possible values: 500 Default value: 1000 This value is optional.
outsideSensorId	In case you have an sensor outside you can provide the ID here. This is used to calculate ventilation effects. Possible values: 158d020172841d Default value: none This value is optional.
showTend	Shows an icon indicating temperature and humidity trend (up, down, equal) Possible values: true Default value: true This value is optional.
showWindow	Shows an icon for the open state of the door/window sensors. Possible values: true Default value: false This value is optional.
showLights	Shows an icon for the state of lights in the room. Possible values: true Default value: false This value is optional.
showHeating	Shows an icon for the heating state of the MAX! system. Possible values: true Default value: false This value is optional.
showNotifications	Wether to enable visual notifications on temperature and humidity alarms. Possible values: true Default value: true This value is optional.
audioNotifications	Wether to enable audio notifications on temperature and humidity alarms. You need a MM with speakers or audio device connected. See https://www.raspberrypi.org/documentation/configuration/audio-config.md for help on setting up audio on a raspberry. Possible values: true Default value: false This value is optional.
minTemperature	Minimum temperature for indoor rooms. In case temperature drops below this value a notification is displayed (optionally also audio notification). Possible values: 18 Default value: 17 This value is optional.
maxTemperature	Maximum temperature for indoor rooms. In case temperature raises above this value a notification is displayed (optionally also audio notification). Possible values: 22 Default value: 99 This value is optional.
maxHumidity	Maximum humidity for indoor rooms. In case humidity exceeds this value a notification is displayed (optionally also audio notification). Possible values: 70 Default value: 68 This value is optional.
celcius	Wether the temperature should be displayed in celcius (true) or fahrenheit (false). Possible values: false Default value: true This value is optional.
rooms	List of configured rooms. See "Room configuration options" options below.

Room configuration options

Option	Description
name	The name of your room Possible values: Living room Default value: none
sortOrder	The sorting order for your room. Lower numbers will be sorted above higher numbers. Possible values: 20 Default value: none
devices	A list of device IDs within your room. This can be all kind of (supported) devices, like temperature, door/window sensors or yeelights. Possible values: ['158d000171240d', '158d00026cddae'] Default value: none

Example:

modules: [
	{
		module: 'MMM-xiaomi',
		position: 'bottom_left',
		header: 'Temperature / Humidity',  // This is optional
		config: {
			gatewayIP: '192.168.0.1',
			outsideSensorId: '158d0001618421',
			showWindow: true,
			showVentilation: true,
			showLights: false,
			audioNotifications: true,
			rooms:  [
				{
					name: 'Living room',
					sortOrder: 10,
					devices : ['158d000171840d', '158d00016ccdae']
				},
				{
					name: 'Bedroom',
					sortOrder: 20,
					devices : ['158d0001635ac2']
				},
			]
		}
	},

]

Authentification

In case you need a security token to access your gateway you can provide this token via the configuration parameters. To find out the correct token do the following:

1. Install miio command line tools via 'npm install -g miio'
2. Discover your devices via 'miio --discover'
3. In your gateway device you can now see the security token required, use this in the configuration

Base API

This Modul is using the MIIO library (https://github.com/aholstenson/miio).