MPF-SPIKE Bridge

Bridge between the Mission Pinball Framework and Stern SPIKE pinball machines.

This is the code that runs on the SD card installed in the SPIKE CPU node which allows a remote system (such as MPF) to control the pinball machine.

Details & Instructions: http://docs.missionpinball.org/en/latest/hardware/spike

Cross Compiling for Spike 1 (if you made changes)

cargo install cross
cross build --target armv5te-unknown-linux-musleabi --release
cp target/armv5te-unknown-linux-musleabi/release/mpf-spike bridge-spike1

Cross Compiling for Spike 2 (if you made changes)

cargo install cross
cross build --target armv7-unknown-linux-musleabihf --release
cp target/armv7-unknown-linux-musleabihf/release/mpf-spike bridge-spike2

Installing

Copy the bridge to your SPIKE SD card at /bin/bridge. The compiled binaries are located in this directory and are called bridge_spike1 and bridge_spike2. See http://docs.missionpinball.org/en/latest/hardware/spike for details.