Skip to content

Android Device Security Database network gateway setup config files (OpenWRT Turris Omnia)

License

Notifications You must be signed in to change notification settings

mobilesec/adsd-setup-network

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

10 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

ADSD network setup

This repository holds configuration files for the WiFi network tracing setup of the Android Device Security Database Lab at the Institute of Networks and Security at JKU Linz. It is based on a Turris Omnia access point performing 802.1x/802.11i client specific authentication and assigning a unique (virtual) VLAN to each Android device. This allows capturing all WiFi network traffic per device, including broadcast/multicast packets and independently of MAC address randomization.

We currently mirror all VLAN tagged packets to an Arkime server for statistical analysis, but any tool capable of monitoring Ethernet packets should be useful for analysis in this setup. This is currently using L2TP because that actually worked with the standard Turris kernel and a Debian VM peer, while I couldn't manage to get a GRETAP tunnel working so far.

Note on credentials and other site-specific data

To make this reasonably usable, replace

  • 'wifilab123' in config/wireless with a local PSK that devices need to connect to internal, non-VLAN-tagged network (e.g. for the access point admin interface), which is bridged to the Ethernet LAN ports
  • 'testing123' in all config files and command line argyments with a randomly created password to authenticate the Radius communication
  • 'client123' in freeradius3/mods-config/files/authorize with passwords for the actual Android clients - using the same password is ok. The user names should be unique to map to unique VLAN numbers, which is the whole point of this exercise.
  • ula_prefix in config/network with a unique prefix
  • potentially wan configuration in config/network if DHCP is not used upstream
  • L2TP tunnel configuration for the mirror interface in config/network and rc.local to match the local and peer IP addresses for the specific setup
  • MAILTO in cron.d/local-check-connected-wifi-devices and local mail server in msmtprc to receive email about device connection stats

For using a proper certificate for Radius authentication

Inspired by https://brainfood.xyz/post/20190518-letsencrypt-on-turris-omnia/

  • Call opkg install acme to get the necessary scripts
  • Make sure there is a publicly resolvable DNS name for your access point, with port 80 reachable from the WAN side (the firewall rule for the port on the router itself will be opened dynamically only while renewing)
  • Disable sentinel/minipot (the honeypot) from catching port 80
  • mkdir mkdir -p /www/letsencrypt/.well-known/acme-challenge/
  • echo 'alias.url += ( "/.well-known/acme-challenge/" => "/www/letsencrypt/.well-known/acme-challenge/")' > /etc/lighttpd/conf.d/05-letsencrypt.conf
  • Adapt /etc/config/acme with your hostname
  • Change /etc/acme/cleanup-letsencrypt.sh to use the proper filenames with your hostname
  • Execute /etc/init.d/acme enable; /etc/init.d/acme start
  • ln -s /etc/acme/<your-hostname>/ca.cer /etc/freeradius3/certs/ca.pem

If something goes wrong, manually starting /usr/lib/acme/run-acme should give some error messages.

About

Android Device Security Database network gateway setup config files (OpenWRT Turris Omnia)

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages