Skip to content
/ cmpossl Public
forked from openssl/openssl

An OpenSSL-based implementation of the Certificate Management Protocol (CMP), defined in IETF RFCs 4210, 4211, and 6712. It is being extended according to the emerging RFCs 'CMP Updates' (CMPv3), 'CMP Algorithms', and 'Lightweight CMP Profile'.

License

Notifications You must be signed in to change notification settings

mpeylo/cmpossl

 
 

Repository files navigation

CMPforOpenSSL (cmpossl)

This is an intermediate CMP, CRMF, and HTTP version abstraction library based on OpenSSL. It is needed as long as required CMP features are not yet (fully) available in the OpenSSL version being used.

Note that this library does not provide a CLI. In case you need a CLI or want to use a more high-level C API for CMP, take advantage of the Generic CMP Client, which can be built on top of this library or on OpenSSL 3.0 or later.

Purpose

The purpose of this software is to provide a uniform interim CMP and HTTP client API and implementation library that links with all current OpenSSL versions.

Since version 3.0, OpenSSL includes an implementation of CMP version 2 and CRMF, as well as a lean HTTP client. Software that is based on earlier OpenSSL versions can make use of this library in order to use CMP and/or the HTTP client capabilities also with OpenSSL 1.x.

Status

In November 2023, the standardization of CMP version 3 was is completed. Along with Certificate Management Protocol (CMP) Updates. the Lightweight CMP Profile (LCMPP) has been defined for simple and interoperable industrial use of CMP.

This library implements all features of CMP version 3 as defined in CMP Updates and in the LCMPP.

As of October 2024, upstream contribution of the latest CMP features to OpenSSL is nearly finished. Version 3.4 contains all of them except for central key generation. The successor of both RFC 4210 and CMP Updates, called RFC 4210bis, has been submitted to IESG for Publication.

Documentation

API documentation is available in the doc/man3 folder.

Prerequisites

This software should work with any flavor of Linux, including Cygwin, also on a virtual machine or the Windows Subsystem for Linux (WSL), and with MacOS.

The following network and development tools are needed or recommended.

  • Git (for getting the software, tested with versions 2.7.2, 2.11.0, 2.20, 2.30.2, 2.39.2)
  • CMake (for using CMakeLists.txt, tested with versions 3.18.4, 3.26.3, 3.27.7)
  • GNU make (tested with versions 3.81, 4.1, 4.2.1, 4.3)
  • GNU C compiler (gcc, tested with versions 5.4.0, 7.3.0, 8.3.0, 10.0.1, 10.2.1) or clang (tested with version 14.0.3 and 17.0.3)

The following OSS components are used.

  • OpenSSL development edition; supported versions: 3.0, 3.1, 3.2

For instance, on a Debian system the prerequisites may be installed simply as follows:

sudo apt install libssl-dev libc-dev linux-libc-dev

while apt install git make gcc usually is not needed as far as these tools are pre-installed.

As a sanity check you can execute in a shell:

git clone git@github.com:mpeylo/cmpossl.git --depth 1
cd cmpossl
make -f OpenSSL_version.mk

This should output on the console something like

cc [...] OpenSSL_version.c -lcrypto -o OpenSSL_version
OpenSSL 3.0.8 7 Feb 2023 (0x30000080)

You might need to set the variable OPENSSL_DIR first as described below, e.g.,

export OPENSSL_DIR=/usr/local

Getting the software

For accessing the code repositories on GitHub you may need an SSH client with suitable credentials or an HTTP proxy set up, for instance:

export https_proxy=http://proxy.my-company.com:8080

You can clone the git repository with

git clone git@github.com:mpeylo/cmpossl.git --depth 1

For using the project as a git submodule, do for instance the following in the directory where you want to integrate it:

git submodule add git@github.com:mpeylo/cmpossl.git

When you later want to update your local copy of all relevant repositories it is sufficient to invoke

make update

Configuring

The library assumes that OpenSSL is already installed, including the C header files needed for development (as provided by, e.g., the Debian/Ubuntu package libssl-dev).

By default any OpenSSL installation available on the system is used. Set the optional environment variable OPENSSL_DIR to specify the absolute (or relative to ../) path of the OpenSSL installation to use, e.g.:

export OPENSSL_DIR=/usr/local

In case its libraries are in a different location, set also OPENSSL_LIB, e.g.:

export OPENSSL_LIB=$OPENSSL_DIR/lib

Since version 2, it is recommended to use CMake to produce the Makefile, for instance as follows:

cmake .

When using CMake, cmake must be (re-)run after setting or unsetting environment variables. By default, CMake builds are in Release mode. This may also be enforced by defining the environment variable NDEBUG. For switching to Debug mode, use cmake with -DCMAKE_BUILD_TYPE=Debug. The chosen mode is remembered in CMakeCache.txt.

For backward compatibility it is also possible to use instead of CMake the pre-defined Makefile_v1; to this end symlink it to Makefile:

ln -s Makefile_v1 Makefile

or use for instance make -f Makefile_v1.

By default, builds using Makefile_v1 are in Debug mode. Release mode can be selected by defining the environment variable NDEBUG.

By default Makefile_v1 behaves as if

OPENSSL_DIR=/usr

was given, such that the OpenSSL headers will be searched for in /usr/include and its shared objects in /usr/lib (or /usr/bin for Cygwin).

When using Makefile_v1, both a dynamic and a static library (libcmp.a) are produced, and there are some extra options. You may specify using the environment variable OUT_DIR where the produced library files (e.g., libcmp.so.2.0) shall be placed. By default, the current directory (.) is used.
The environment variable CC may be set as needed; it defaults to gcc.
For further details on optional environment variables, see the Makefile_v1.

Building

Build the software with

make

The result is in, for instance, ./libcmp.so.2.0.

Using the library in own applications

For compiling applications using the library, you will need to add the directory include/cmp to your C headers path.

For linking you will need to refer the linker to the library, e.g., -lcmp and add the directory (e.g., with the linker option -L) where it can be found. See also the environment variable OUT_DIR. For helping the Linux loader to find the libraries at run time, it is recommended to set also linker options like -Wl,-rpath,..

Also make sure that the OpenSSL libraries (typically referred to via -lssl -lcrypto) are in your library path and (the version) of the libraries found there by the linker match the header files found by the compiler.

Installing and uninstalling

The software can be installed with, e.g.,

sudo make install

and uninstalled with

sudo make uninstall

The destination is /usr, unless specified otherwise by DESTDIR or ROOTFS.

Cleaning up

make clean removes part of the artifacts, while make clean_all removes everything produced by make and CMake.

Building Debian packages

This repository can build the following Debian and source packages.

  • libcmp -- the shared library
  • libcmp-dev -- development headers and documentation
  • libcmp*Source.tar.gz -- source tarball

The recommended way is to use CPack with files produced by CMake, for instance as follows:

make deb

The recommended way is to use CPack with the files produced by CMake as follows:

make deb

which requries the file utility.

Alternatively, Makefile_v1 may be used like this:

make -f Makefile_v1 deb

In this case, the resulting packages are placed in the parent directory (../), and requires the following Debian packages:

  • debhelper (needed for dh)
  • devscripts (needed for debuild)
  • libssl-dev

The Debian packages may be installed for instance as follows:

sudo dpkg -i libcmp*deb

Disclaimer

This software including associated documentation is provided ‘as is’. Effort has been spent on quality assurance, but there are no guarantees.

License

This work is licensed under the terms of the Apache Software License 2.0. See the LICENSE.txt file in the top-level directory.

SPDX-License-Identifier: Apache-2.0

About

An OpenSSL-based implementation of the Certificate Management Protocol (CMP), defined in IETF RFCs 4210, 4211, and 6712. It is being extended according to the emerging RFCs 'CMP Updates' (CMPv3), 'CMP Algorithms', and 'Lightweight CMP Profile'.

Topics

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • C 97.9%
  • CMake 1.1%
  • Makefile 1.0%