This repository contains the full RepRapFirmware configuration, as well as modified printable parts, for a customized Ratrig V-Core 3.0 3D printer.
The firmware is designed around the following hardware:
- Duet 3 MB6HC
- Slice Engineering Mosquito Magnum hotend
- Bondtech BMG-M extuder
- BLTouch v3.1 Z-probe
- 1.8° LDO 42STH47-2504AC X/Y stepper motors
- 1.8° LDO 42STH40-1684AC Z stepper motors
- 0.9° LDO 42STH25-1404MAC E0 stepper motor
- Keenovo 750W AC bed heater w/SSR
- 340x340x6 MIC6 tooling plate print-bed
In addition to the standard kit from Ratrig, the following extra components are required:
- None as of yet
Please note: This list may be incomplete as this project is still ongoing.