docs: adds info on setting up host network access

site/content/installation/running-on-kind.md

@@ -40,13 +40,59 @@ To install NGINX Gateway Fabric, choose the appropriate installation guide that
 - [Installation with Helm]({{< relref "installation/installing-ngf/helm.md" >}})
 - [Installation with Kubernetes manifests]({{< relref "installation/installing-ngf/manifests.md" >}})
 
+## Set up a NodePort
+
+When using kind clusters, be aware that NodePort services require [additional setup](https://kind.sigs.k8s.io/docs/user/configuration/#nodeport-with-port-mappings).
+
+For example, the following will automatically set up port forwarding into a local cluster (intended for development):
+
+```yaml
+kind: Cluster
+apiVersion: kind.x-k8s.io/v1alpha4
+nodes:
+- role: control-plane
+  extraPortMappings:
+  - containerPort: 31437
+    hostPort: 8080
+    protocol: TCP
+  - containerPort: 31438
+    hostPort: 8443
+    protocol: TCP
+---
+apiVersion: v1
+kind: Service
+metadata:
+  name: nginx-gateway
+  namespace: nginx-gateway # must be same namespace as your gateway
+  labels:
+    app.kubernetes.io/name: nginx-gateway
+    app.kubernetes.io/instance: nginx-gateway
+    app.kubernetes.io/version: "edge"
+spec:
+  type: NodePort
+  selector:
+    app.kubernetes.io/name: nginx-gateway
+    app.kubernetes.io/instance: nginx-gateway
+  ports: # Update the following ports to match your Gateway Listener ports
+  - name: http
+    port: 80
+    protocol: TCP
+    targetPort: 80
+    nodePort: 31437 # See https://kind.sigs.k8s.io/docs/user/configuration/#nodeport-with-port-mappings
+  - name: https
+    port: 443
+    protocol: TCP
+    targetPort: 443
+    nodePort: 31438
+```
+
 {{<note>}}
-When using kind clusters, be aware that NodePort services require [additional setup](https://kind.sigs.k8s.io/docs/user/configuration/#nodeport-with-port-mappings). Also, for LoadBalancer services, you’ll need a [third-party controller](https://kind.sigs.k8s.io/docs/user/loadbalancer/) like MetalLB to assign external IPs. The default Helm chart creates a LoadBalancer service; however, you can disable this by adding `--set service.create=false` to your Helm command. Afterward, you can [configure port forwarding](#configure-port-forwarding) as described below to access the examples.
+For LoadBalancer services, you’ll need a [third-party controller](https://kind.sigs.k8s.io/docs/user/loadbalancer/) like MetalLB to assign external IPs. The default Helm chart creates a LoadBalancer service; however, you can disable this by adding `--set service.create=false` to your Helm command. Afterward, you can [configure port forwarding](#configure-port-forwarding) as described below to access the examples.
 {{</note>}}
 
 ## Configure Port Forwarding {#configure-port-forwarding}
 
-Once NGINX Gateway Fabric has been installed, you need to configure port forwarding from local ports **8080** and **8443** to ports **80** and **443** on the **nginx-gateway** Pod.
+Once NGINX Gateway Fabric has been installed, if you don't have port forwarding set with both the `NodePort` and `extraPortMappings`, you need to configure port forwarding from local ports **8080** and **8443** to ports **80** and **443** on the **nginx-gateway** Pod.
 
 To configure port forwarding, run the following command: