Skip to content

nixbuild/nixbuild-action

Use this GitHub action with your project
Add this Action to an existing workflow or create a new one
View on Marketplace

Repository files navigation

nixbuild.net Action

This GitHub Action sets up Nix to use the nixbuild.net service. It supports all Linux and MacOS GitHub platforms. From either of those platforms, it can run x86_64-linux and aarch64-linux Nix builds.

You need a nixbuild.net account to make use of this action.

The configuration needed for this action is simple – you only need to specify the SSH key used to authenticate your nixbuild.net account. You will then automatically reap the benefits that nixbuild.net provides:

  • Instead of having all Nix builds for a single GitHub job share the same two vCPUs, each Nix build will get up to 16 vCPUs. It doesn't matter how many concurrent Nix builds a job triggers, nixbuild.net will scale up automatically to avoid any slowdown.

  • All Nix builds triggered from your nixbuild.net account can share their build results with each other. So, if you have multiple workflows triggering the same builds, each derivation will only be built once on nixbuild.net. This works automatically, there is no need for configuring any binary caches, and you save time by not having to upload build results.

  • Build result sharing also works outside GitHub Actions. You can use nixbuild.net from your development machine so that builds already performed by your GitHub workflows become available locally, or the other way around. Again, no extra configuration or binary caches are needed for this, just a nixbuild.net account

  • Builds that run on nixbuild.net work just as ordinary Nix builds, so you can still do whatever you want with the build results, like uploading to a separate binary cache.

See the nixbuild.net FAQ for more information about the nixbuild.net service.

If you run into any problems using this action, or have feedback to share, please open an issue on this repository or drop an email to support@nixbuild.net.

Usage

This repository offers two different ways of running Nix builds with nixbuild.net. You can use this repository as a normal GitHub Action, which lets you use Nix in any way you like inside your workflow while all builds that Nix runs are automatically offloaded to nixbuild.net. You need to install Nix in some way (we'll get to this below), and then explicitly call nix build or similar inside your workflow.

An even more convenient way is by using the CI Workflow, which is a reusable workflow. This workflow installs Nix, checks out your repository and evaluates a flake.nix file found in it. It then automatically builds the derivations found in checks or packages (or both). You can configure exactly which derivations that should be built; by default all derivations in checks are built. The individual derivations will be built by separate (concurrent) GitHub Jobs which will give you a very nice overview over successful and failed builds on GitHub's workflow result page. Care has been taken to run your builds in the most performant way possible.

If your project has a flake.nix file and you simply want to build your checks or packages, we highly recommend you to use the CI Workflow. If you don't use flakes or have more complex needs when it comes to evaluating and building Nix expressions, use nixbuild-action.

Prerequisites

  1. Register for a nixbuild.net account. Every account includes free build hours, so you can try out this action without paying for anything.

  2. Generate an auth token using the nixbuild.net shell:

    $ ssh eu.nixbuild.net shell
    nixbuild.net> tokens create -p build:read -p build:write -p store:read -p store:write
    

    You can also provide a --ttl-seconds option to specify the token's expiration time. If you leave it out, the token will be valid for 1000 days.

  3. Store your token as a GitHub Secret

  4. Configure nixbuild-action to use the auth token secret like this:

    uses: nixbuild/nixbuild-action@v19
    with:
      nixbuild_token: ${{ secrets.nixbuild_token }}

Using the CI workflow

Call the reusable workflow like this:

name: Examples
on: push
jobs:
  checks:
    uses: nixbuild/nixbuild-action/.github/workflows/ci-workflow.yml@v19
    secrets:
      nixbuild_token: ${{ secrets.nixbuild_token }}

You can configure the location of your flake.nix file, filter which derivations to build, set nixbuild.net settings and more. Look at the workflow definition to see how.

There is an example workflow that uses the CI workflow. You can see how the workflow runs look in the GitHub Actions UI here.

The reusable CI workflow provides outputs that lets you process build results in a subsequent job.

All build logs are automatically stored as workflow artifacts so you can download them if needed. You can also see the build logs in the GitHub Actions console UI.

Using nixbuild-action

  1. Install Nix with either nixbuild/nix-quick-install-action or cachix/install-nix-action.

  2. Use nixbuild/nixbuild-action in your workflows. You don't need to configure anything else than your SSH key.

Now you can use Nix as you would normally do. nixbuild-action configures nixbuild.net as a remote builder, which means all builds will automatically be sent to nixbuild.net.

Here is a complete minimal workflow example:

name: Examples
on: push
jobs:
  minimal:
    runs-on: ubuntu-20.04
    steps:
      - uses: actions/checkout@v3
      - uses: nixbuild/nix-quick-install-action@v24
      - uses: nixbuild/nixbuild-action@v19
        with:
          nixbuild_token: ${{ secrets.nixbuild_token }}
      - run: nix-build ...

Remote Store Building

For optimal build performance, especially on ephemeral instances like the GHA runners, you should look into how to use remote store building.

In short, remote store building avoids having build inputs being downloaded to the local machine (the GHA runner in this case). It also lets nixbuild.net make more decisions on how the builds are scheduled.

There are a few issues around remote store building (both in Nix and in nixbuild.net), which is why nixbuild-action doesn't default to it. However, the CI Workflow is using it successfully to get the best build performance. If you want to try it out, you should use the following options when invoking Nix:

nix build \
  --print-build-logs \
  --builders "" \
  --max-jobs 2 \
  --eval-store auto \
  --store ssh-ng://eu.nixbuild.net \
  ...

The above options works around issues with IFD and missing build logs. Remote store building with nixbuild.net is only possible using nix build, not nix-build, and you need to make sure you specify the store URI using ssh-ng://, not ssh://.

When using remote store building, the final build result is not automatically downloaded to the GHA runner (it will only exist in the remote store in nixbuild.net). Often, you are mostly interested in seeing if the build succeeds or not, so this is not an issue. However, if you actually need to use the build result in your workflow you need to explicitly fetch it.

You might see Nix output don't know how to build these paths when starting a remote store build. You can ignore that output, as it doesn't mean anything is wrong. There is an open Nix issue about this.

Generating Build Summaries

nixbuild-action can generate a summary of all builds that ran on nixbuild.net, including information on how much CPU time that was consumed. You can generate summaries for an individual job, or for the complete workflow. To generate a summary for the job that uses nixbuild-action, configure it like this:

- uses: nixbuild/nixbuild-action@v19
  with:
    nixbuild_token: ${{ secrets.nixbuild_token }}
    generate_summary_for: 'job'

To generate a summary for all builds that was executed during a complete workflow, add a job that runs on the very end of the workflow, and configure it like this:

- uses: nixbuild/nixbuild-action@v19
  with:
    nixbuild_token: ${{ secrets.nixbuild_token }}
    generate_summary_for: 'workflow'

The build summaries look like this:

summary

nixbuild.net Settings

Optionally, you can configure nixbuild.net settings that you want your builds to use. Some settings are available directly as inputs of this action. Other settings, like max-cpu-hours-per-month, can only be configured through the nixbuild.net shell.

The settings configured for this action is communicated to nixbuild.net through the SSH environment. This means that any setting you set here will override your account settings.

If you want to disable the possibility to change any nixbuild.net settings through GitHub Actions, you can set the settings-from-ssh-env setting to false. You need to change this setting from within the nixbuild.net shell. If you do that, any nixbuild.net setting configured for the action will be ignored. Only settings configured for your nixbuild.net account will then be used.

An example workflow that turns on the reuse-build-timeouts setting:

name: Examples
on: push
jobs:
  minimal:
    runs-on: ubuntu-20.04
    steps:
      - uses: actions/checkout@v3
      - uses: nixbuild/nix-quick-install-action@v24
      - uses: nixbuild/nixbuild-action@v19
        with:
          nixbuild_token: ${{ secrets.nixbuild_token }}
          reuse-build-timeouts: true
      - run: nix-build