-
|
Hello. I wrote an input file which yields the following visualization: However, I actually want the thin box to be translated along the y-axis so that it is above the rotated red box. And of course, I would like the pencil beam source to be outside of these geometries. How do I do this? I've been trying to use the egs_gtransformed library to handle the translations / rotations along with the egs_gunion library to use both boxes. What am I doing wrong? My code is attached below. |
Beta Was this translation helpful? Give feedback.
Replies: 1 comment 1 reply
-
|
First, create a big air box for everything to be inside. Use egs_genvelope to put other geometries inside the box. As long as your boxes don't overlap or touch, you can just put them both in the envelope. Also, you just have a typo, you used |
Beta Was this translation helpful? Give feedback.
-
|
Thank you for your help. This fixed the confusions I was having. |
Beta Was this translation helpful? Give feedback.
First, create a big air box for everything to be inside. Use egs_genvelope to put other geometries inside the box. As long as your boxes don't overlap or touch, you can just put them both in the envelope.
Also, you just have a typo, you used
:start translation:instead of:start transformation:.