Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
KVM: SVM: Disable AVIC on SNP-enabled system without HvInUseWrAllowed…
… feature On SNP-enabled system, VMRUN marks AVIC Backing Page as in-use while the guest is running for both secure and non-secure guest. Any hypervisor write to the in-use vCPU's AVIC backing page (e.g. to inject an interrupt) will generate unexpected #PF in the host. Currently, attempt to run AVIC guest would result in the following error: BUG: unable to handle page fault for address: ff3a442e549cc270 #PF: supervisor write access in kernel mode #PF: error_code(0x80000003) - RMP violation PGD b6ee01067 P4D b6ee02067 PUD 10096d063 PMD 11c540063 PTE 80000001149cc163 SEV-SNP: PFN 0x1149cc unassigned, dumping non-zero entries in 2M PFN region: [0x114800 - 0x114a00] ... Newer AMD system is enhanced to allow hypervisor to modify the backing page for non-secure guest on SNP-enabled system. This enhancement is available when the CPUID Fn8000_001F_EAX bit 30 is set (HvInUseWrAllowed). This table describes AVIC support matrix w.r.t. SNP enablement: | Non-SNP system | SNP system ----------------------------------------------------- Non-SNP guest | AVIC Activate | AVIC Activate iff | | HvInuseWrAllowed=1 ----------------------------------------------------- SNP guest | N/A | Secure AVIC Therefore, check and disable AVIC in kvm_amd driver when the feature is not available on SNP-enabled system. See the AMD64 Architecture Programmer’s Manual (APM) Volume 2 for detail. (https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/ programmer-references/40332.pdf) Fixes: 216d106 ("x86/sev: Add SEV-SNP host initialization support") Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Link: https://lore.kernel.org/r/20241104075845.7583-1-suravee.suthikulpanit@amd.com Signed-off-by: Sean Christopherson <seanjc@google.com>
- Loading branch information