Home Assistant FusionSolar OpenAPI Integration

Integrate FusionSolar into you Home Assistant.

FusionSolar allows you to query your plants through an OpenAPI.

Installation

At this point the integration is not part of the default HACS repositories, so you will need to add this repository as a custom repository in HACS.

When this is done, just install the repository.

Requirements

Create an OpenAPI account.

1. Contact service team at eu_inverter_support@huawei.com to create an openAPI account for your plant.
2. Get credentials
3. Find your PlantID (aka station code)
   Follow the documentation and especially the Step 5: Interface of Plant List Copy the stationCode.

Configuration

configuration.yaml

Add the code below:

sensor:
  - platform: fusion_solar_openapi
    credentials:
      username: !secret fusion_solar_username
      password: !secret fusion_solar_password
    plants:
      - id: "REPLACE THIS WITH YOUR STATION CODE"
        name: "A readable name for the plant"

Use secrets

I strongly advise to store your crendials as a secret.

More information on secrets: Storing secrets.

Multiple plants

You can configure multiple plants:

sensor:
  - platform: fusion_solar_openapi
    credentials:
      username: !secret fusion_solar_username
      password: !secret fusion_solar_password
    plants:
      - id: "REPLACE THIS WITH YOUR STATION CODE XXXXX"
        name: "A readable name for plant XXXXX"
      - id: "REPLACE THIS WITH YOUR STATION CODE YYYYY"
        name: "A readable name for plant YYYYY"

Credits

This integration is based on the awsome work of @tijsverkoyen on https://github.com/tijsverkoyen/Home-Assistant-FusionSolar-Kiosk/