[epsonprojector] Update epsonprojector binding for OH3

CODEOWNERS

@@ -62,6 +62,7 @@
 /bundles/org.openhab.binding.enigma2/ @gdolfen
 /bundles/org.openhab.binding.enocean/ @fruggy83
 /bundles/org.openhab.binding.enturno/ @klocsson
+/bundles/org.openhab.binding.epsonprojector/ @mlobstein
 /bundles/org.openhab.binding.etherrain/ @dfad1469
 /bundles/org.openhab.binding.evohome/ @Nebula83
 /bundles/org.openhab.binding.exec/ @kgoderis

bom/openhab-addons/pom.xml

@@ -301,6 +301,11 @@
       <artifactId>org.openhab.binding.enturno</artifactId>
       <version>${project.version}</version>
     </dependency>
+    <dependency>
+      <groupId>org.openhab.addons.bundles</groupId>
+      <artifactId>org.openhab.binding.epsonprojector</artifactId>
+      <version>${project.version}</version>
+    </dependency>
     <dependency>
       <groupId>org.openhab.addons.bundles</groupId>
       <artifactId>org.openhab.binding.etherrain</artifactId>

bundles/org.openhab.binding.epsonprojector/NOTICE

@@ -0,0 +1,13 @@
+This content is produced and maintained by the openHAB project.
+
+* Project home: https://www.openhab.org
+
+== Declared Project Licenses
+
+This program and the accompanying materials are made available under the terms
+of the Eclipse Public License 2.0 which is available at
+https://www.eclipse.org/legal/epl-2.0/.
+
+== Source Code
+
+https://github.com/openhab/openhab-addons

bundles/org.openhab.binding.epsonprojector/README.md

@@ -0,0 +1,174 @@
+# Epson Projector Binding
+
+This binding is compatible with Epson projectors that support the ESC/VP21 protocol over a serial port or USB to serial adapter.
+Alternatively, you can connect to your projector via a TCP connection using a serial over IP device or by using`ser2net`.
+
+## Supported Things
+
+This binding supports two thing types based on the connection used: `projector-serial` and `projector-tcp`.
+
+## Discovery
+
+The projector thing cannot be auto-discovered, it has to be configured manually.
+
+## Binding Configuration
+
+There are no overall binding configuration settings that need to be set.
+All settings are through thing configuration parameters.
+
+## Thing Configuration
+
+The `projector-serial` thing has the following configuration parameters:
+
+- _serialPort_: Serial port device name that is connected to the Epson projector to control, e.g. COM1 on Windows, /dev/ttyS0 on Linux or /dev/tty.PL2303-0000103D on Mac
+- _pollingInterval_: Polling interval in seconds to update channel states | 5-60 seconds; default 10 seconds
+
+The `projector-tcp` thing has the following configuration parameters:
+
+- _host_: IP address for the serial over IP device
+- _port_: Port for the serial over IP device
+- _pollingInterval_: Polling interval in seconds to update channel states | 5-60 seconds; default 10 seconds
+
+Some notes:
+
+* The binding should work on all Epson projectors that support the ESC/VP21 protocol, however not all binding channels will be useable on all projectors.
+* The _source_ channel includes a dropdown with the most common source inputs.
+* If your projector has a source input that is not in the dropdown, the two digit hex code to access that input will be displayed by the _source_ channel when that input is selected by the remote control.
+* By using the sitemap mapping or a rule to send the input's code back to the _source_ channel, any source on the projector can be accessed by the binding.
+* The following channels _aspectratio_, _colormode_, _luminance_, _gamma_ and _background_ are pre-populated with a full set of options and not every option will be useable on all projectors.
+* If your projector has an option in one of the above mentioned channels that is not recognized by the binding, the channel will display 'UNKNOWN' if that un-recognized option is selected by the remote control.
+* If the projector power is switched to off in the middle of a polling operation, some of the channel values may become undefined until the projector is switched on again.
+
+* On Linux, you may get an error stating the serial port cannot be opened when the epsonprojector binding tries to load.
+* You can get around this by adding the `openhab` user to the `dialout` group like this: `usermod -a -G dialout openhab`.
+* Also on Linux you may have issues with the USB if using two serial USB devices e.g. epsonprojector and RFXcom. See the [general documentation about serial port configuration](/docs/administration/serial.html) for more on symlinking the USB ports.
+* Here is an example of ser2net.conf you can use to share your serial port /dev/ttyUSB0 on IP port 4444 using [ser2net Linux tool](https://sourceforge.net/projects/ser2net/) (take care, the baud rate is specific to the Epson projector):
+
+```
+4444:raw:0:/dev/ttyUSB0:9600 8DATABITS NONE 1STOPBIT LOCAL
+```
+
+## Channels
+
+| Channel            | Item Type | Purpose                                             | Values    | 
+| ------------------ | --------- | --------------------------------------------------- | --------- | 
+| power              | Switch    | Powers the projector on or off.                     |           | 
+| powerstate         | String    | Retrieves the textual power state of the projector. | Read only | 
+| source             | String    | Retrieve or set the input source.                   | See above | 
+| aspectratio        | String    | Retrieve or set the aspect ratio.                   | See above | 
+| colormode          | String    | Retrieve or set the color mode.                     | See above | 
+| freeze             | Switch    | Turn the freeze screen mode on or off.              |           | 
+| mute               | Switch    | Turn the AV mute on or off.                         |           | 
+| volume             | Number    | Retrieve or set the volume.                         | 0   - +20 | 
+| luminance          | String    | Retrieve or set the lamp mode.                      | See above | 
+| brightness         | Number    | Retrieve or set the brightness.                     | -24 - +24 | 
+| contrast           | Number    | Retrieve or set the contrast.                       | -24 - +24 | 
+| density            | Number    | Retrieve or set the density (color saturation).     | -32 - +32 | 
+| tint               | Number    | Retrieve or set the tint.                           | -32 - +32 | 
+| colortemperature   | Number    | Retrieve or set the color temperature.              | 0   - +9  | 
+| fleshtemperature   | Number    | Retrieve or set the flesh temperature.              | 0   - +6  | 
+| gamma              | String    | Retrieve or set the gamma setting.                  | See above | 
+| autokeystone       | Switch    | Turn the auto keystone mode on or off.              |           | 
+| verticalkeystone   | Number    | Retrieve or set the vertical keystone.              | -30 - +30 | 
+| horizontalkeystone | Number    | Retrieve or set the horizontal keystone.            | -30 - +30 | 
+| verticalposition   | Number    | Retrieve or set the vertical position.              | -8  - +10 | 
+| horizontalposition | Number    | Retrieve or set the horizontal position.            | -23 - +26 | 
+| verticalreverse    | Switch    | Turn the vertical reverse mode on or off.           |           | 
+| horizontalreverse  | Switch    | Turn the horizontal reverse mode on or off.         |           | 
+| background         | String    | Retrieve or set the background color/logo.          | See above | 
+| keycode            | Number    | Send a key operation command to the projector.      | Send only | 
+| lamptime           | Number    | Retrieves the lamp hours.                           | Read only | 
+| errcode            | Number    | Retrieves the last error code.                      | Read only | 
+| errmessage         | String    | Retrieves the description of the last error.        | Read only | 
+
+## Full Example
+
+things/epson.things:
+
+```java
+//serial port connection
+epsonprojector:projector-serial:hometheater "Projector" [ serialPort="COM5", pollingInterval=10 ]
+
+// serial over IP connection
+epsonprojector:projector-tcp:hometheater "Projector"  [ host="192.168.0.10", port=4444, pollingInterval=10 ]
+
+```
+
+items/epson.items
+
+```
+Switch epsonPower                                      { channel="epsonprojector:projector:hometheater:power" }
+String epsonSource       "Source [%s]"                 { channel="epsonprojector:projector:hometheater:source" }
+String epsonAspectRatio  "Aspect Ratio [%s]"           { channel="epsonprojector:projector:hometheater:aspectratio" }
+String epsonColorMode    "Color Mode [%s]"             { channel="epsonprojector:projector:hometheater:colormode" }
+Switch epsonFreeze                                     { channel="epsonprojector:projector:hometheater:freeze" }
+Switch epsonMute                                       { channel="epsonprojector:projector:hometheater:mute" }
+Number epsonVolume                                     { channel="epsonprojector:projector:hometheater:volume" }
+String epsonLuminance    "Lamp Mode [%s]"              { channel="epsonprojector:projector:hometheater:luminance" }
+
+Number epsonBrightness                                 { channel="epsonprojector:projector:hometheater:brightness" }
+Number epsonContrast                                   { channel="epsonprojector:projector:hometheater:contrast" }
+Number epsonDensity                                    { channel="epsonprojector:projector:hometheater:density" }
+Number epsonTint                                       { channel="epsonprojector:projector:hometheater:tint" }
+Number epsonColorTemperature                           { channel="epsonprojector:projector:hometheater:colortemperature" }
+Number epsonFleshTemperature                           { channel="epsonprojector:projector:hometheater:fleshtemperature" }
+String epsonGamma        "Gamma [%s]"                  { channel="epsonprojector:projector:hometheater:gamma" }
+
+Switch epsonAutokeystone                               { channel="epsonprojector:projector:hometheater:autokeystone" }
+Number epsonVerticalKeystone                           { channel="epsonprojector:projector:hometheater:verticalkeystone" }
+Number epsonHorizontalKeystone                         { channel="epsonprojector:projector:hometheater:horizontalkeystone" }
+Number epsonVerticalPosition                           { channel="epsonprojector:projector:hometheater:verticalposition" }
+Number epsonHorizontalPosition                         { channel="epsonprojector:projector:hometheater:horizontalposition" }
+Switch epsonVerticalReverse                            { channel="epsonprojector:projector:hometheater:verticalreverse" }
+Switch epsonHorizontalReverse                          { channel="epsonprojector:projector:hometheater:horizontalreverse" }
+
+String epsonBackground  "Background [%s]"              { channel="epsonprojector:projector:hometheater:background" }
+String epsonPowerState  "Power State [%s]"   <switch>  { channel="epsonprojector:projector:hometheater:powerstate" }
+Number epsonLampTime    "Lamp Time [%d h]"   <switch>       { channel="epsonprojector:projector:hometheater:lamptime" }
+Number epsonErrCode     "Error Code [%d]"    <"siren-on">   { channel="epsonprojector:projector:hometheater:errcode" }
+String epsonErrMessage  "Error Message [%s]" <"siren-off">  { channel="epsonprojector:projector:hometheater:errmessage" }
+```
+
+sitemaps/epson.sitemap
+
+```
+sitemap epson label="Epson Projector Demo"
+{
+    Frame label="Controls" {
+        Switch     item=epsonPower  label="Power"
+        Selection  item=epsonSource label="Source" mappings=["30"="HDMI1", "A0"="HDMI2", "14"="Component", "20"="PC DSUB", "41"="Video", "42"="S-Video"]
+        Switch     item=epsonFreeze label="Freeze"
+        Switch     item=epsonMute   label="AV Mute"
+        Setpoint   item=epsonVolume label="Volume"
+
+    }
+    Frame label="Adjust Image" {
+        Setpoint   item=epsonBrightness         label="Brightness"
+        Setpoint   item=epsonContrast           label="Contrast"
+        Setpoint   item=epsonDensity            label="Color Saturation"
+        Setpoint   item=epsonTint               label="Tint"
+        Switch     item=epsonAutokeystone       label="Auto Keystone"
+        Setpoint   item=epsonVerticalKeystone   label="Vertical Keystone"
+        Setpoint   item=epsonHorizontalKeystone label="Horizontal Keystone"
+        Setpoint   item=epsonVerticalPosition   label="Vertical Position"
+        Setpoint   item=epsonHorizontalPosition label="Horizontal Position"
+        Selection  item=epsonBackground         label="Background"
+    }
+    Frame label="Flip Projection" {
+        Switch  item=epsonVerticalReverse   label="Vertical Reverse"
+        Switch  item=epsonHorizontalReverse label="Horizontal Reverse"
+    }
+    Frame label="Info" {
+        Text  item=epsonAspectRatio
+        Text  item=epsonColorMode
+        Text  item=epsonColorTemperature    label="Color Temperature"
+        Text  item=epsonFleshTemperature    label="Flesh Temperature"
+        Text  item=epsonGamma
+        Text  item=epsonLuminance
+        Text  item=epsonPowerState
+        Text  item=epsonLampTime
+        Text  item=epsonErrCode
+        Text  item=epsonErrMessage
+    }
+}
+```

bundles/org.openhab.binding.epsonprojector/pom.xml

@@ -0,0 +1,17 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://maven.apache.org/POM/4.0.0"
+  xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
+
+  <modelVersion>4.0.0</modelVersion>
+
+  <parent>
+    <groupId>org.openhab.addons.bundles</groupId>
+    <artifactId>org.openhab.addons.reactor.bundles</artifactId>
+    <version>3.0.0-SNAPSHOT</version>
+  </parent>
+
+  <artifactId>org.openhab.binding.epsonprojector</artifactId>
+
+  <name>openHAB Add-ons :: Bundles :: Epson Projector Binding</name>
+
+</project>

bundles/org.openhab.binding.epsonprojector/src/main/feature/feature.xml

@@ -0,0 +1,10 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<features name="org.openhab.binding.epsonprojector-${project.version}" xmlns="http://karaf.apache.org/xmlns/features/v1.4.0">
+	<repository>mvn:org.openhab.core.features.karaf/org.openhab.core.features.karaf.openhab-core/${ohc.version}/xml/features</repository>
+
+	<feature name="openhab-binding-epsonprojector" description="Epson Projector Binding" version="${project.version}">
+		<feature>openhab-runtime-base</feature>
+		<feature>openhab-transport-serial</feature>
+		<bundle start-level="80">mvn:org.openhab.addons.bundles/org.openhab.binding.epsonprojector/${project.version}</bundle>
+	</feature>
+</features>

bundles/org.openhab.binding.epsonprojector/src/main/java/org/openhab/binding/epsonprojector/internal/EpsonProjectorBindingConstants.java

@@ -0,0 +1,37 @@
+/**
+ * Copyright (c) 2010-2020 Contributors to the openHAB project
+ *
+ * See the NOTICE file(s) distributed with this work for additional
+ * information.
+ *
+ * This program and the accompanying materials are made available under the
+ * terms of the Eclipse Public License 2.0 which is available at
+ * http://www.eclipse.org/legal/epl-2.0
+ *
+ * SPDX-License-Identifier: EPL-2.0
+ */
+package org.openhab.binding.epsonprojector.internal;
+
+import org.eclipse.jdt.annotation.NonNullByDefault;
+import org.openhab.core.thing.ThingTypeUID;
+
+/**
+ * The {@link EpsonProjectorBindingConstants} class defines common constants, which are
+ * used across the whole binding.
+ *
+ * @author Yannick Schaus - Initial contribution
+ */
+@NonNullByDefault
+public class EpsonProjectorBindingConstants {
+
+    private static final String BINDING_ID = "epsonprojector";
+
+    // List of all Thing Type UIDs
+    public static final ThingTypeUID THING_TYPE_PROJECTOR_SERIAL = new ThingTypeUID(BINDING_ID, "projector-serial");
+    public static final ThingTypeUID THING_TYPE_PROJECTOR_TCP = new ThingTypeUID(BINDING_ID, "projector-tcp");
+
+    // Some Channel types
+    public static final String CHANNEL_TYPE_POWER = "power";
+    public static final String CHANNEL_TYPE_POWERSTATE = "powerstate";
+    public static final String CHANNEL_TYPE_LAMPTIME = "lamptime";
+}

bundles/org.openhab.binding.epsonprojector/src/main/java/org/openhab/binding/epsonprojector/internal/EpsonProjectorCommandException.java

@@ -0,0 +1,30 @@
+/**
+ * Copyright (c) 2010-2020 Contributors to the openHAB project
+ *
+ * See the NOTICE file(s) distributed with this work for additional
+ * information.
+ *
+ * This program and the accompanying materials are made available under the
+ * terms of the Eclipse Public License 2.0 which is available at
+ * http://www.eclipse.org/legal/epl-2.0
+ *
+ * SPDX-License-Identifier: EPL-2.0
+ */
+package org.openhab.binding.epsonprojector.internal;
+
+import org.eclipse.jdt.annotation.NonNullByDefault;
+
+/**
+ * Exception for Epson projector command errors.
+ *
+ * @author Michael Lobstein - Initial contribution
+ */
+@NonNullByDefault
+public class EpsonProjectorCommandException extends Exception {
+
+    private static final long serialVersionUID = -8048415193494625295L;
+
+    public EpsonProjectorCommandException(String message) {
+        super(message);
+    }
+}