fhem-docker

This is Docker project for the Raspberry Pi3(arm64) including the following containers:

• fhem
• mqtt
• alexa
• fhemExtended (python-interface)

Installtion

Requirements

You need a working Docker environment(including the package docker-compose). For example you can use the already prebuild Hypriot Docker Images. Or you can just install Docker with this command curl -sSL https://get.docker.com | sh.

Dont forget to enable SPI. This can be achieved by adding dtparam=spi=on to the config.txt if your using the Hypriot Image or via sudo raspi-config and then enable SPI interface: Interfacing Options > P4 SPI > Yes if your using a standard Raspbian Image.

Install container

To install this container run the following command, after you are logged in into your Raspberry Pi via ssh:

git clone https://github.com/opit7/fhem-docker.git
cd rpi-fhem-docker
source install.sh

The installation process might take a little longer. But afterwards you are presented a fully working fhem homeautomation server ready to control Sonoff devices with Amazon Alexa.

Have fun 🙂