Document install script (#952)

README.md

@@ -18,95 +18,24 @@ where the project is and where it's going.
 Join [the Discord server](https://discord.gg/87cjuz4FYg) to chat with fellow
 ordinal degenerates.
 
-Contributing
+Installation
 ------------
 
-### Suggested Steps
-
-1. Find an issue you want to work on.
-2. Figure out what would be a good first step towards resolving the issue. This
-   could be in the form of code, research, a proposal, or suggesting that it be
-   closed, if it's out of date or not a good idea in the first place.
-3. Comment on the issue with an outline of your suggested first step, and
-   asking for feedback. Of course, you can dive in and start writing code or
-   tests immediately, but this avoids potentially wasted effort, if the issue
-   is out of date, not clearly specified, blocked on something else, or
-   otherwise not ready to implement.
-4. If the issue requires a code change or bugfix, open a draft PR with tests,
-   and ask for feedback. This makes sure that everyone is on the same page
-   about what needs to be done, or what the first step in solving the issue
-   should be. Also, since tests are required, writing the tests first makes it
-   easy to confirm that the change can be tested easily.
-5. Mash the keyboard randomly until the tests pass, and refactor until the code
-   is ready to submit.
-6. Mark the PR as ready to review.
-7. Revise the PR as needed.
-8. And finally, mergies!
-
-### Advice
-
-#### Start small
-
-Small changes will allow you to make an impact
-quickly, and if you take the wrong tack, you won't have wasted much time.
-
-Ideas for small issues:
-- Add a new test or test case that increases test coverage
-- Add or improve documentation
-- Find an issue that needs more research, and do that research and summarize it
-  in a comment
-- Find an out-of-date issue and comment that it can be closed
-- Find an issue that shouldn't be done, and provide constrictive feedback
-  detailing why you think that is the case
-
-#### Merge early and often
-
-Break up large tasks into multiple smaller steps that individually make
-progress. If there's a bug, you can open a PR that adds a failing ignored test.
-This can be merged, and the next step can be to fix the bug and unignore the
-test. Do research or testing, and report on your results. Break a feature into
-small sub-features, and implement them one at a time.
-
-Figuring out how to break down a larger PR into smaller PRs where each can be
-merged is a art form well-worth practicing. The hard part is that each PR must
-itself be an improvement.
-
-I strive to follow this advice myself, and am always better off when I do.
-
-Small changes are fast to write, review, and merge, which is much more fun than
-laboring over a single giant PR that takes forever to write, review, and merge.
-Small changes don't take much time, so if you need to stop working on a small
-change, you won't have wasted much time as compared to a larger change that
-represents many hours of work. Getting a PR in quickly improves the project a
-little bit immediately, instead of having to wait a long time for larger
-improvement. Small changes are less likely to accumulate merge conflict. As the
-Athenians said: *The fast commit what they will, the slow merge what they
-must.*
-
-#### Get help
-
-If you're stuck for more than 15 minutes, ask for help, like a Rust Discord,
-Stack Exchange, or in a project issue or discussion.
-
-#### Practice hypothesis-driven debugging
-
-Formulate a hypothesis as to what is causing the problem. Figure out how to
-test that hypothesis. Perform that tests. If it works, great, you fixed the
-issue or now you know how to fix the issue. If not, repeat with a new
-hypothesis.
-
-#### Pay attention to error messages
-
-Read all error messages, and don't tolerate warnings.
-
-### Copyright
-
-`ord` is licensed under the CC0, a no-strings-attached public domain dedication
-and fallback license. Your changes must be licensed under the CC0, without any
-additional terms or conditions
-
-Running `ord`
--------------
+`ord` is written in Rust and can be built from
+[source](https://github.com/casey/ord). Pre-built binaries are available on the
+[releases page](https://github.com/casey/ord/releases).
+
+You can install the latest pre-built binary from the command line with:
+
+```sh
+curl --proto '=https' --tlsv1.2 -fsLS https://ordinals.com/install.sh | bash -s
+```
+
+Once `ord` is installed, you should be able to run `ord --version` on the
+command line.
+
+Syncing
+-------
 
 `ord` requires a synced `bitcoind` node with `-txindex` to build the index of
 ordinal locations. `ord` communicates with `bitcoind` via RPC.
@@ -119,29 +48,13 @@ If `bitcoind` is not on mainnet, is not run by the same user, has a non-default
 datadir, or a non-default port, you'll need to pass additional flags to `ord`.
 See `ord --help` for details.
 
-### Minimum System Requirements
-
-Building the `ord` index is memory-intensive. An `ord` instance running on a
-reasonably powerful system with 64 GiB of RAM and a fully-synced,
-locally-hosted Bitcoin Core node can build the index in under 24 hours.
+Logging
+--------
 
-An `ord` instance running on a system with less than 64 GiB of RAM will take
-much longer to build the index, with some users reporting sync times of two
-weeks or more.
-
-A this point in development, the format of the `ord` index is changing rapidly,
-so be prepared to delete and re-sync the index.
-
-### Logging
-
-`ord` uses [env_logger](https://docs.rs/env_logger/latest/env_logger/). Set the `RUST_LOG` environment variable in order to turn on logging. For example, run the server and show `info`-level log messages and above:
+`ord` uses [env_logger](https://docs.rs/env_logger/latest/env_logger/). Set the
+`RUST_LOG` environment variable in order to turn on logging. For example, run
+the server and show `info`-level log messages and above:
 
 ```
 $ RUST_LOG=info cargo run server
 ```
-
-Reorgs
-------
-
-Currently, reorganizations are detected but not handled. After reorgs happen,
-you'll need to delete `index.redb` and start over.

docs/src/SUMMARY.md

@@ -1,15 +1,12 @@
 # Summary
-
 [Introduction](introduction.md)
-
 - [Overview](overview.md)
 - [FAQ](faq.md)
-
+- [Contributing](contributing.md)
 - [Guides](guides.md)
   - [Explorer](guides/explorer.md)
   - [Inscriptions](guides/inscriptions.md)
   - [Ordinal Hunting](guides/ordinal-hunting.md)
-
 - [Bounties](bounties.md)
   - [Bounty 0: 100,000 sats Claimed!](bounty/0.md)
   - [Bounty 1: 200,000 sats Claimed!](bounty/1.md)

docs/src/contributing.md

@@ -0,0 +1,84 @@
+Contributing to `ord`
+=====================
+
+Suggested Steps
+---------------
+
+1. Find an issue you want to work on.
+2. Figure out what would be a good first step towards resolving the issue. This
+   could be in the form of code, research, a proposal, or suggesting that it be
+   closed, if it's out of date or not a good idea in the first place.
+3. Comment on the issue with an outline of your suggested first step, and
+   asking for feedback. Of course, you can dive in and start writing code or
+   tests immediately, but this avoids potentially wasted effort, if the issue
+   is out of date, not clearly specified, blocked on something else, or
+   otherwise not ready to implement.
+4. If the issue requires a code change or bugfix, open a draft PR with tests,
+   and ask for feedback. This makes sure that everyone is on the same page
+   about what needs to be done, or what the first step in solving the issue
+   should be. Also, since tests are required, writing the tests first makes it
+   easy to confirm that the change can be tested easily.
+5. Mash the keyboard randomly until the tests pass, and refactor until the code
+   is ready to submit.
+6. Mark the PR as ready to review.
+7. Revise the PR as needed.
+8. And finally, mergies!
+
+Start small
+-----------
+
+Small changes will allow you to make an impact
+quickly, and if you take the wrong tack, you won't have wasted much time.
+
+Ideas for small issues:
+- Add a new test or test case that increases test coverage
+- Add or improve documentation
+- Find an issue that needs more research, and do that research and summarize it
+  in a comment
+- Find an out-of-date issue and comment that it can be closed
+- Find an issue that shouldn't be done, and provide constrictive feedback
+  detailing why you think that is the case
+
+Merge early and often
+---------------------
+
+Break up large tasks into multiple smaller steps that individually make
+progress. If there's a bug, you can open a PR that adds a failing ignored test.
+This can be merged, and the next step can be to fix the bug and unignore the
+test. Do research or testing, and report on your results. Break a feature into
+small sub-features, and implement them one at a time.
+
+Figuring out how to break down a larger PR into smaller PRs where each can be
+merged is a art form well-worth practicing. The hard part is that each PR must
+itself be an improvement.
+
+I strive to follow this advice myself, and am always better off when I do.
+
+Small changes are fast to write, review, and merge, which is much more fun than
+laboring over a single giant PR that takes forever to write, review, and merge.
+Small changes don't take much time, so if you need to stop working on a small
+change, you won't have wasted much time as compared to a larger change that
+represents many hours of work. Getting a PR in quickly improves the project a
+little bit immediately, instead of having to wait a long time for larger
+improvement. Small changes are less likely to accumulate merge conflict. As the
+Athenians said: *The fast commit what they will, the slow merge what they
+must.*
+
+Get help
+--------
+
+If you're stuck for more than 15 minutes, ask for help, like a Rust Discord,
+Stack Exchange, or in a project issue or discussion.
+
+Practice hypothesis-driven debugging
+------------------------------------
+
+Formulate a hypothesis as to what is causing the problem. Figure out how to
+test that hypothesis. Perform that tests. If it works, great, you fixed the
+issue or now you know how to fix the issue. If not, repeat with a new
+hypothesis.
+
+Pay attention to error messages
+-------------------------------
+
+Read all error messages and don't tolerate warnings.

docs/src/guides/inscriptions.md

@@ -110,6 +110,12 @@ The `ord` utility is written in Rust and can be built from
 [source](https://github.com/casey/ord). Pre-built binaries are available on the
 [releases page](https://github.com/casey/ord/releases).
 
+You can install the latest pre-built binary from the command line with:
+
+```sh
+curl --proto '=https' --tlsv1.2 -fsLS https://ordinals.com/install.sh | bash -s
+```
+
 Once `ord` is installed, you should be able to run `ord --version` on the
 command line.
 

src/subcommand/server.rs

@@ -150,14 +150,15 @@ impl Server {
 
       let router = Router::new()
         .route("/", get(Self::home))
+        .route("/block-count", get(Self::block_count))
         .route("/block/:query", get(Self::block))
         .route("/bounties", get(Self::bounties))
         .route("/clock", get(Self::clock))
         .route("/faq", get(Self::faq))
         .route("/favicon.ico", get(Self::favicon))
-        .route("/block-count", get(Self::block_count))
         .route("/input/:block/:transaction/:input", get(Self::input))
         .route("/inscription/:txid", get(Self::inscription))
+        .route("/install.sh", get(Self::install_script))
         .route("/ordinal/:ordinal", get(Self::ordinal))
         .route("/output/:output", get(Self::output))
         .route("/range/:start/:end", get(Self::range))
@@ -416,6 +417,10 @@ impl Server {
     )
   }
 
+  async fn install_script() -> Redirect {
+    Redirect::to("https://raw.githubusercontent.com/casey/ord/master/install.sh")
+  }
+
   async fn block(
     Extension(chain): Extension<Chain>,
     Extension(index): Extension<Arc<Index>>,
@@ -941,6 +946,14 @@ mod tests {
     );
   }
 
+  #[test]
+  fn install_sh_redirects_to_github() {
+    TestServer::new().assert_redirect(
+      "/install.sh",
+      "https://raw.githubusercontent.com/casey/ord/master/install.sh",
+    );
+  }
+
   #[test]
   fn bounties_redirects_to_docs_site() {
     TestServer::new().assert_redirect("/bounties", "https://docs.ordinals.com/bounty/");