OpenEvse don't work with disabled secuity test

[DylanVautrin]

Hello, i would like to use my OpenEVSE and disabled GFCI and Ground check, but when i disable it in the GUI, the charging session never start, the OpenEVSE display "Charging" but i don't have any power
Can you help me please ?
Best regards

[chris1howell]

If OpenEVSE displays Charging, it has done all it can do. Now it is up to the vehicle to pull power.

…

On Tue, Jan 30, 2024 at 11:44 AM DylanVautrin ***@***.***> wrote: Hello, i would like to use my OpenEVSE and disabled GFCI and Ground check, but when i disable it in the GUI, the charging session never start, the OpenEVSE display "Charging" but i don't have any power Can you help me please ? Best regards — Reply to this email directly, view it on GitHub <#34>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAN5QH7FJXZTOJY5NCFUEKTYREPOPAVCNFSM6AAAAABCRSRZK6VHI2DSMVQWIX3LMV43ERDJONRXK43TNFXW4OZWGE2TONBQHE> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[DylanVautrin]

Hello, thanks for replying.
I'm working with a M3 simulator, and usually, it works well when the test is enabled, and is only when i disabled it that it don't have any power, i'm in a particular case where i HAVE to disable the test, in particular the GFCI and Ground monitor.
Can you help me ?