Change Sensor Voltage from 120 to 240V

[Fionnoch]

Hi,

I recently setup a v5.6 OpenEVSE Advanced kit and am very happy with the features however I am in Europe (Ireland specifically) and the voltage the device is defaulting to is 120V but I know that should be 230/240v. Where can I change the default value or else is this a hardware issue? I know the current sensors are correct as I have checked the values against the what the car is reading which is why I believe this is a default value somewhere.

I have tried changing the setting to 3 phase (I'm only using 1 phase) but that did not output the correct values. Any help would be greatly appreciated :)

[chris1howell]

Set Service Level to 2 (208-240v). Service Level 1 (120v) or Auto is incorrect for Europe.

…

On Sat, Sep 21, 2024, 2:24 PM Fionnoch ***@***.***> wrote: Hi, I recently setup a v5.6 OpenEVSE Advanced kit and am very happy with the features however I am in Europe (Ireland specifically) and the voltage the device is defaulting to is 120V but I know that should be 230/240v. Where can I change the default value or else is this a hardware issue? I know the current sensors are correct as I have checked the values against the what the car is reading which is why I believe this is a default value somewhere. I have tried changing the setting to 3 phase (I'm only using 1 phase) but that did not output the correct values. Any help would be greatly appreciated :) image.png (view on web) <https://github.com/user-attachments/assets/ff114e7d-99a4-4f23-b684-dfaa14242138> — Reply to this email directly, view it on GitHub <#42>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAN5QH2JGLG7RE7JIIIYIWDZXXIV7AVCNFSM6AAAAABOT4AYA6VHI2DSMVQWIX3LMV43ERDJONRXK43TNFXW4OZXGIYTKMZVGY> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[Fionnoch]

Brilliant thank you! such a simple fix but I was trolling though files trying to find it