installation_tutorial

Installing VRX

Once you have set up your development environment, the following steps will download and build VRX:

1. Create a colcon workspace and clone the vrx repository

   mkdir -p ~/vrx_ws/src
   cd ~/vrx_ws/src
   git clone https://github.com/osrf/vrx.git
   

2. Source your ROS 2 installation.

   source /opt/ros/humble/setup.bash
   

3. Build the workspace

   cd ~/vrx_ws
   colcon build --merge-install
   

Setting up your environment

Now that you've built the simulation, you will need to source the setup script before you can do anything with it. From the root of your workspace, run:

. install/setup.bash

Note that, in general, you always need to perform this step when working with ROS and ROS 2 workspaces. Forgetting to source the environment is one of the most common mistakes among new users. If you're new to ROS 2 workspaces, you may find this tutorial helpful.

Back: Preparing Your System	Top: VRX Tutorials	Next: Running VRX