RT soldering pen

Manual

This firmware is for my project RT soldering pen

You can buy HW at Tindie

Building and flashing

Requirements

• arm-gcc
• cmake
• make or ninja
• STM flashing SW and HW (ST-Link/V2 or any ST dev-kit, like Discovery or Nucleo board)

Building is possible on Linux, Mac and also on Windows

Getting source

git clone --recursive https://github.com/pavelrevak/rt_soldering_pen.git
cd rt_soldering_pen

Building

mkdir _build
cd _build
cmake -D CMAKE_TOOLCHAIN_FILE=../cmake/arm-none-eabi.cmake -D CMAKE_BUILD_TYPE=Release ..
make

Flashing

Connect ST-Link or other SWD programmer:

HW v0.3

• G : GND
• C : SWCLK
• D : SWDIO

HW v1.0

• C : SWCLK
• G : GND
• D : SWDIO

If you have installed pystlink and is in search path just type:

make flash

If you have another flashing utility you can generate hex of binary file:

make srec

or building also support other targets hex and bin

Final files are saved in _build folder