Fix text_cache with proper cache invocation #44
Workflow file for this run
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| name: Test ArchLinux | |
| on: | |
| push: | |
| branches: | |
| - 'main' | |
| - 'releases/**' | |
| pull_request: | |
| workflow_dispatch: | |
| jobs: | |
| # ArchLinux does not come with an image combining root and boot partitions | |
| # This shows how to proceed and could be combined with cache. | |
| test_archlinux: | |
| runs-on: ubuntu-latest | |
| steps: | |
| - uses: actions/checkout@v4 | |
| - name: Prepare ArchLinux image | |
| run: | | |
| # https://archlinuxarm.org/platforms/armv7/broadcom/raspberry-pi-2 | |
| # Install dependency | |
| sudo apt-get -y install libarchive-tools | |
| # Create a 1.5 GB image | |
| dd if=/dev/zero of=$RUNNER_TEMP/archlinux.img bs=1M count=1536 | |
| # 2. At the fdisk prompt, delete old partitions and create a new one: | |
| # using the sed comment trick of https://superuser.com/a/984637 | |
| sed -e 's/\s*\([\+0-9a-zA-Z]*\).*/\1/' << EOF | fdisk $RUNNER_TEMP/archlinux.img | |
| o # clear the in memory partition table | |
| n # new partition | |
| p # primary partition | |
| 1 # partition number 1 | |
| # default - start at beginning of disk | |
| +200M # 200 MB boot partition | |
| t # type | |
| c # W95 FAT32 (LBA) | |
| n # new partition | |
| p # primary partition | |
| 2 # partion number 2 | |
| # default, start immediately after preceding partition | |
| # default, extend partition to end of disk | |
| w # write the partition table | |
| q # and we're done | |
| EOF | |
| # create loopdev | |
| loopdev=$(sudo losetup --find --show --partscan $RUNNER_TEMP/archlinux.img) | |
| # 3. Create and mount the FAT filesystem: | |
| sudo mkfs.vfat ${loopdev}p1 | |
| mkdir boot | |
| sudo mount ${loopdev}p1 boot | |
| # 4. Create and mount the ext4 filesystem: | |
| sudo mkfs.ext4 ${loopdev}p2 | |
| mkdir root | |
| sudo mount ${loopdev}p2 root | |
| # 5. Download and extract the root filesystem: | |
| wget http://os.archlinuxarm.org/os/ArchLinuxARM-rpi-armv7-latest.tar.gz | |
| sudo -u root bsdtar -xpf ArchLinuxARM-rpi-armv7-latest.tar.gz -C root | |
| sync | |
| # 6. Move boot files to the first partition: | |
| sudo mv root/boot/* boot | |
| # 7. Unmount the two partitions: | |
| sudo umount boot root | |
| # Cleanup | |
| rm ArchLinuxARM-rpi-armv7-latest.tar.gz | |
| rmdir boot | |
| rmdir root | |
| - uses: ./ # pguyot/arm-runner-action@HEAD | |
| with: | |
| base_image: file://$RUNNER_TEMP/archlinux.img | |
| cpu: cortex-a53 | |
| commands: | | |
| # 10. Initialize the pacman keyring and populate the Arch Linux ARM package signing keys: | |
| pacman-key --init | |
| pacman-key --populate archlinuxarm |