This repository contains OpenSCAD module that provides models of individual Cherry profile keycaps in R1 to R4 profile and sizes 1u, 1.25u, 1.5u, 1.75u, 2u, 2.25u, 2.75u and 6.25u.
All keycaps are currently centered (similar to specifying center=true on OpenSCAD primitives). The standard "bottom left corner at origin" positioning might be added later.
The actual models are taken from the ConstantinoSchillebeeckx/cherry-mx-keycaps repository. All credit for the models goes to the original author.
First, clone this repository into your OpenSCAD project (including submodule):
git clone --recursive https://github.com/piit79/openscad_cherry_keycaps.git
If you're tracking your project in Git, it's probably best to add this repository as a submodule:
git submodule add https://github.com/piit79/openscad_cherry_keycaps.git
git submodule update --init --recursive
Then, simply include the module in your project with the use keyword:
use <openscad_cherry_keycaps/cherry_keycaps.scad>;
for (row = [1:4])
translate([0, 9.5 + (2 - row) * 19, 0])
cherry_1u(row);
Note the usage of use instead of include to avoid evaluating example code present in the module.
You should get something like this:
