forked from qmk/qmk_firmware
-
Notifications
You must be signed in to change notification settings - Fork 0
Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
[Keyboard] Update Tractyl Manuform config for F411 (qmk#14770)
- Loading branch information
Showing
6 changed files
with
58 additions
and
169 deletions.
There are no files selected for viewing
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -1,159 +1,25 @@ | ||
| Dactyl Manuform (4x5, 5x6, 5x7, 6x6) | ||
| ====== | ||
| the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link. | ||
|  | ||
|
|
||
|
|
||
| ## First Time Setup | ||
|
|
||
| Download or clone the `qmk_firmware` repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using: | ||
|
|
||
| Depending on your Layout chose one of the follwing commands: | ||
|
|
||
| ``` | ||
| $ make handwired/dactyl_manuform/YOUR_LAYOUT:YOUR_KEYMAP_NAME | ||
| ``` | ||
|
|
||
| example: | ||
| ``` | ||
| $ make handwired/dactyl_manuform/4x5:default | ||
| ``` | ||
|
|
||
| If everything worked correctly you will see a file: | ||
|
|
||
| ``` | ||
| dactyl_manuform_YOUR_LAYOUT_YOUR_KEYMAP_NAME.hex | ||
| ``` | ||
|
|
||
| For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/docs/faq_keymap.md) in the main readme.md. | ||
|
|
||
|
|
||
| ## Keymaps | ||
|
|
||
| ### [Keymaps 4x5](/keyboards/handwired/dactyl_manuform/4x5/keymaps/) | ||
|
|
||
| #### Default | ||
| Simple QWERTY layout with 3 Layers. | ||
| #### Dvorak | ||
|
|
||
| ### [Keymaps 5x6](/keyboards/handwired/dactyl_manuform/5x6/keymaps/) | ||
|
|
||
| #### Default | ||
| Just a copy of the Impstyle keymap. Feel free to adjust it. | ||
|
|
||
| #### Impstyle | ||
| A simple QWERTY keymap with 3 Layers. Both sides are connected via serial and the Left ist the master. | ||
|
|
||
| ### [Keymaps 5x7 aka almost Ergodox](/keyboards/handwired/dactyl_manuform/5x7/keymaps/) | ||
| #### Default | ||
| Keymap of Loligagger from geekhack. | ||
|
|
||
| ### [Keymaps 6x6](/keyboards/handwired/dactyl_manuform/6x6/keymaps/) | ||
|
|
||
| #### Default | ||
| Simple QWERTY layout with 3 Layers. | ||
|
|
||
| ## Required Hardware | ||
|
|
||
| Apart from diodes and key switches for the keyboard matrix in each half, you | ||
| will need: | ||
|
|
||
| * 2 Arduino Pro Micros. You can find these on AliExpress for ≈3.50USD each. | ||
| * 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable | ||
|
|
||
| Alternatively, you can use any sort of cable and socket that has at least 3 | ||
| wires. If you want to use I2C to communicate between halves, you will need a | ||
| cable with at least 4 wires and 2x 4.7kΩ pull-up resistors | ||
|
|
||
| ## Optional Hardware | ||
| A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`. | ||
| # Tractyl Manuform (4x6, 5x6) | ||
|
|
||
| ## Wiring | ||
|
|
||
| The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e. | ||
| PD0 on the ATmega32u4) between the two Pro Micros. | ||
|
|
||
| Next, wire your key matrix to any of the remaining 17 IO pins of the pro micro | ||
| and modify the `matrix.c` accordingly. | ||
|
|
||
| The wiring for serial: | ||
|
|
||
|  | ||
|
|
||
| The wiring for i2c: | ||
|
|
||
|  | ||
|
|
||
| The pull-up resistors may be placed on either half. It is also possible | ||
| to use 4 resistors and have the pull-ups in both halves, but this is | ||
| unnecessary in simple use cases. | ||
|
|
||
| You can change your configuration between serial and i2c by modifying your `config.h` file. | ||
|
|
||
| ## Notes on Software Configuration | ||
|
|
||
| the keymaps in here are for the 4x5 layout of the keyboard only. | ||
|
|
||
| ## Flashing | ||
|
|
||
| To flash your firmware take a look at: [Flashing Instructions and Bootloader Information](https://docs.qmk.fm/#/flashing) | ||
|
|
||
|
|
||
| ## Choosing which board to plug the USB cable into (choosing Master) | ||
|
|
||
| Because the two boards are identical, the firmware has logic to differentiate the left and right board. | ||
|
|
||
| It uses two strategies to figure things out: looking at the EEPROM (memory on the chip) or looking if the current board has the usb cable. | ||
|
|
||
| The EEPROM approach requires additional setup (flashing the eeprom) but allows you to swap the usb cable to either side. | ||
|
|
||
| The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra. | ||
|
|
||
| ### Setting the left hand as master | ||
|
|
||
| If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set. | ||
|
|
||
| ### Setting the right hand as master | ||
|
|
||
| If you always plug the usb cable into the right board, add an extra flag to your `config.h` | ||
| ``` | ||
| #define MASTER_RIGHT | ||
| ``` | ||
|
|
||
| ### Setting EE_hands to use either hands as master | ||
| the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link. | ||
|  | ||
|
|
||
| If you define `EE_HANDS` in your `config.h`, you will need to set the | ||
| EEPROM for the left and right halves. | ||
| * Keyboard Maintainer: [drashna](https://github.com/drashna) | ||
| * Hardware Supported: Teensy 2.0++, WeAct BlackPill F411 | ||
|
|
||
| The EEPROM is used to store whether the | ||
| half is left handed or right handed. This makes it so that the same firmware | ||
| file will run on both hands instead of having to flash left and right handed | ||
| versions of the firmware to each half. To flash the EEPROM file for the left | ||
| half run: | ||
| ``` | ||
| make handwired/dactyl_promicro:default:dfu-split-left | ||
| make handwired/dactyl_promicro:default:dfu-split-right | ||
| ``` | ||
| Make example for this keyboard (after setting up your build environment): | ||
|
|
||
| After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash. | ||
| make handwired/tractyl_manuform/5x6_right/f411/drashna:default | ||
|
|
||
| Note that you need to program both halves, but you have the option of using | ||
| different keymaps for each half. You could program the left half with a QWERTY | ||
| layout and the right half with a Colemak layout using bootmagic's default layout option. | ||
| Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the | ||
| right half is connected. | ||
| Flashing example for this keyboard: | ||
|
|
||
| make handwired/tractyl_manuform/5x6_right/f411/drashna:default:flash | ||
|
|
||
| Notes on Using Pro Micro 3.3V | ||
| ----------------------------- | ||
| See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). | ||
|
|
||
| Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects | ||
| the frequency on the 3.3V board. | ||
| ## Bootloader | ||
|
|
||
| Also, if the slave board is producing weird characters in certain columns, | ||
| update the following line in `matrix.c` to the following: | ||
| Enter the bootloader in 3 ways: | ||
|
|
||
| ``` | ||
| // wait_us(30); // without this wait read unstable value. | ||
| wait_us(300); // without this wait read unstable value. | ||
| ``` | ||
| * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard | ||
| * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead | ||
| * **Keycode in layout**: Press the key mapped to `RESET` if it is available |