Linux 6.4.10 jammy #273
Closed
Linux 6.4.10 jammy #273
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
commit 09430ab upstream. There were two flags (s_flags and s_cache) which had incorrect signed type in the parameters of the file cache mode helper function. Cc: stable@vger.kernel.org Fixes: 1543b4c ("fs/9p: remove writeback fid and fix per-file modes") Reviewed-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 350cd9b upstream. There was an invalidate_inode_pages2 added to readonly mmap path that is unnecessary since that path is only entered when writeback cache is disabled on mount. Cc: stable@vger.kernel.org Fixes: 1543b4c ("fs/9p: remove writeback fid and fix per-file modes") Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com> Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 05f1d8e upstream. Quiesce and resume are functions that tell the DASD driver to stop/resume issuing I/Os to a specific DASD. On resume dasd_schedule_block_bh() is called to kick handling of IO requests again. This does unfortunately not cover internal requests which are used for path verification for example. This could lead to a hanging device when a path event or anything else that triggers internal requests occurs on a quiesced device. Fix by also calling dasd_schedule_device_bh() which triggers handling of internal requests on resume. Fixes: 8e09f21 ("[S390] dasd: add hyper PAV support to DASD device driver, part 1") Cc: stable@vger.kernel.org Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20230721193647.3889634-2-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 856d8e3 upstream. The DASD driver has certain types of requests that might be rejected by the storage server or z/VM because they are not supported. Since the missing support of the command is not a real issue there is no user visible kernel error message for this. For copy pair setups there is a specific error that IO is not allowed on secondary devices. This error case is explicitly handled and an error message is printed. The code checking for the error did use a bitwise 'and' that is used to check for specific bits. But in this case the whole sense byte has to match. This leads to the problem that the copy pair related error message is erroneously printed for other error cases that are usually not reported. This might heavily confuse users and lead to follow on actions that might disrupt application processing. Fix by checking the sense byte for the exact value and not single bits. Cc: stable@vger.kernel.org # 6.1+ Fixes: 1fca631 ("s390/dasd: suppress generic error messages for PPRC secondary devices") Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20230721193647.3889634-5-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 21d9b73 upstream. Currently the mptcp code generate a "new listener" event even if the actual listen() syscall fails. Address the issue moving the event generation call under the successful branch. Cc: stable@vger.kernel.org Fixes: f8c9dfb ("mptcp: add pm listener events") Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20230725-send-net-20230725-v1-2-6f60fe7137a9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f061e2b upstream. The WM8904_ADC_TEST_0 register is modified as part of updating the OSR controls but does not have a cache default, leading to errors when we try to modify these controls in cache only mode with no prior read: wm8904 3-001a: ASoC: error at snd_soc_component_update_bits on wm8904.3-001a for register: [0x000000c6] -16 Add a read of the register to probe() to fill the cache and avoid both the error messages and the misconfiguration of the chip which will result. Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230723-asoc-fix-wm8904-adc-test-read-v1-1-2cdf2edd83fd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 05d881b upstream. As part of fixing the allocation of the buffer for SVE state when changing SME vector length we introduced an immediate reallocation of the SVE state, this is also done when changing the SVE vector length for consistency. Unfortunately this reallocation is done prior to writing the new vector length to the task struct, meaning the allocation is done with the old vector length and can lead to memory corruption due to an undersized buffer being used. Move the update of the vector length before the allocation to ensure that the new vector length is taken into account. For some reason this isn't triggering any problems when running tests on the arm64 fixes branch (even after repeated tries) but is triggering issues very often after merge into mainline. Fixes: d4d5be9 ("arm64/fpsimd: Ensure SME storage is allocated after SVE VL changes") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230726-arm64-fix-sme-fix-v1-1-7752ec58af27@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8527beb upstream. The decision whether to enable a wake irq during suspend can not be done based on the runtime PM state directly as a driver may use wake irqs without implementing runtime PM. Such drivers specifically leave the state set to the default 'suspended' and the wake irq is thus never enabled at suspend. Add a new wake irq flag to track whether a dedicated wake irq has been enabled at runtime suspend and therefore must not be enabled at system suspend. Note that pm_runtime_enabled() can not be used as runtime PM is always disabled during late suspend. Fixes: 6972805 ("PM / wakeirq: Fix unbalanced IRQ enable for wakeirq") Cc: 4.16+ <stable@vger.kernel.org> # 4.16+ Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Tony Lindgren <tony@atomide.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac4436a upstream. Since commit 3d439b1 ("thermal/core: Alloc-copy-free the thermal zone parameters structure"), thermal_zone_device_register() allocates a copy of the tzp argument and frees it when unregistering, so thermal_of_zone_register() now ends up leaking its original tzp and double-freeing the tzp copy. Fix this by locating tzp on stack instead. Fixes: 3d439b1 ("thermal/core: Alloc-copy-free the thermal zone parameters structure") Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: 6.4+ <stable@vger.kernel.org> # 6.4+: 8bcbb18: thermal: core: constify params in thermal_zone_device_register Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5016450 upstream. Even the 'disable_send_metrics' is true so when the session is being opened it will always trigger to send the metric for the first time. Cc: stable@vger.kernel.org Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3844ed5 upstream. Dpt objects that are created from internal get evicted when there is memory pressure and do not get restored when pinned during scanout. The pinned page table entries look corrupted and programming the display engine with the incorrect pte's result in DE throwing pipe faults. Create DPT objects from shmem and mark the object as dirty when pinning so that the object is restored when shrinker evicts an unpinned buffer object. v2: Unconditionally mark the dpt objects dirty during pinning(Chris). Fixes: 0dc987b ("drm/i915/display: Add smem fallback allocation for dpt") Cc: <stable@vger.kernel.org> # v6.0+ Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Suggested-by: Chris Wilson <chris.p.wilson@intel.com> Signed-off-by: Fei Yang <fei.yang@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230718225118.2562132-1-radhakrishna.sripada@intel.com (cherry picked from commit e91a777) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e4ab7b upstream. When using the cleaner policy to decommission the cache, there is never any writeback started from the cache as it is constantly delayed due to normal I/O keeping the device busy. Meaning @idle=false was always being passed to clean_target_met() Fix this by adding a specific 'cleaner' flag that is set when the cleaner policy is configured. This flag serves to always allow the cleaner's writeback work to be queued until the cache is decommissioned (even if the cache isn't idle). Reported-by: David Jeffery <djeffery@redhat.com> Fixes: b29d498 ("dm cache: significant rework to leverage dm-bio-prison-v2") Cc: stable@vger.kernel.org Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f38cb9d upstream. Make the "num_lockers can be only 0 or 1" assumption explicit and simplify the API by getting rid of output parameters in preparation for calling get_lock_owner_info() twice before blocklisting. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ff2c64 upstream. - we want the exclusive lock type, so test for it directly - use sscanf() to actually parse the lock cookie and avoid admitting invalid handles - bail if locker has a blank address Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5881590 upstream. An attempt to acquire exclusive lock can race with the current lock owner closing the image: 1. lock is held by client123, rbd_lock() returns -EBUSY 2. get_lock_owner_info() returns client123 instance details 3. client123 closes the image, lock is released 4. find_watcher() returns 0 as there is no matching watcher anymore 5. client123 instance gets erroneously blocklisted Particularly impacted is mirror snapshot scheduler in snapshot-based mirroring since it happens to open and close images a lot (images are opened only for as long as it takes to take the next mirror snapshot, the same client instance is used for all images). To reduce the potential for erroneous blocklisting, retrieve the lock owner again after find_watcher() returns 0. If it's still there, make sure it matches the previously detected lock owner. Cc: stable@vger.kernel.org # f38cb9d: rbd: make get_lock_owner_info() return a single locker or NULL Cc: stable@vger.kernel.org # 8ff2c64: rbd: harden get_lock_owner_info() a bit Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d8ab9f7 upstream. When VMAs are merged, dup_anon_vma() is called with `dst` pointing to the VMA that is being expanded to cover the area previously occupied by another VMA. This currently happens while `dst` is not write-locked. This means that, in the `src->anon_vma && !dst->anon_vma` case, as soon as the assignment `dst->anon_vma = src->anon_vma` has happened, concurrent page faults can happen on `dst` under the per-VMA lock. This is already icky in itself, since such page faults can now install pages into `dst` that are attached to an `anon_vma` that is not yet tied back to the `anon_vma` with an `anon_vma_chain`. But if `anon_vma_clone()` fails due to an out-of-memory error, things get much worse: `anon_vma_clone()` then reverts `dst->anon_vma` back to NULL, and `dst` remains completely unconnected to the `anon_vma`, even though we can have pages in the area covered by `dst` that point to the `anon_vma`. This means the `anon_vma` of such pages can be freed while the pages are still mapped into userspace, which leads to UAF when a helper like folio_lock_anon_vma_read() tries to look up the anon_vma of such a page. This theoretically is a security bug, but I believe it is really hard to actually trigger as an unprivileged user because it requires that you can make an order-0 GFP_KERNEL allocation fail, and the page allocator tries pretty hard to prevent that. I think doing the vma_start_write() call inside dup_anon_vma() is the most straightforward fix for now. For a kernel-assisted reproducer, see the notes section of the patch mail. Link: https://lkml.kernel.org/r/20230721034643.616851-1-jannh@google.com Fixes: 5e31275 ("mm: add per-VMA lock and helper functions to control it") Signed-off-by: Jann Horn <jannh@google.com> Reviewed-by: Suren Baghdasaryan <surenb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1f02b9 upstream. mm->mm_lock_seq effectively functions as a read/write lock; therefore it must be used with acquire/release semantics. A specific example is the interaction between userfaultfd_register() and lock_vma_under_rcu(). userfaultfd_register() does the following from the point where it changes a VMA's flags to the point where concurrent readers are permitted again (in a simple scenario where only a single private VMA is accessed and no merging/splitting is involved): userfaultfd_register userfaultfd_set_vm_flags vm_flags_reset vma_start_write down_write(&vma->vm_lock->lock) vma->vm_lock_seq = mm_lock_seq [marks VMA as busy] up_write(&vma->vm_lock->lock) vm_flags_init [sets VM_UFFD_* in __vm_flags] vma->vm_userfaultfd_ctx.ctx = ctx mmap_write_unlock vma_end_write_all WRITE_ONCE(mm->mm_lock_seq, mm->mm_lock_seq + 1) [unlocks VMA] There are no memory barriers in between the __vm_flags update and the mm->mm_lock_seq update that unlocks the VMA, so the unlock can be reordered to above the `vm_flags_init()` call, which means from the perspective of a concurrent reader, a VMA can be marked as a userfaultfd VMA while it is not VMA-locked. That's bad, we definitely need a store-release for the unlock operation. The non-atomic write to vma->vm_lock_seq in vma_start_write() is mostly fine because all accesses to vma->vm_lock_seq that matter are always protected by the VMA lock. There is a racy read in vma_start_read() though that can tolerate false-positives, so we should be using WRITE_ONCE() to keep things tidy and data-race-free (including for KCSAN). On the other side, lock_vma_under_rcu() works as follows in the relevant region for locking and userfaultfd check: lock_vma_under_rcu vma_start_read vma->vm_lock_seq == READ_ONCE(vma->vm_mm->mm_lock_seq) [early bailout] down_read_trylock(&vma->vm_lock->lock) vma->vm_lock_seq == READ_ONCE(vma->vm_mm->mm_lock_seq) [main check] userfaultfd_armed checks vma->vm_flags & __VM_UFFD_FLAGS Here, the interesting aspect is how far down the mm->mm_lock_seq read can be reordered - if this read is reordered down below the vma->vm_flags access, this could cause lock_vma_under_rcu() to partly operate on information that was read while the VMA was supposed to be locked. To prevent this kind of downwards bleeding of the mm->mm_lock_seq read, we need to read it with a load-acquire. Some of the comment wording is based on suggestions by Suren. BACKPORT WARNING: One of the functions changed by this patch (which I've written against Linus' tree) is vma_try_start_write(), but this function no longer exists in mm/mm-everything. I don't know whether the merged version of this patch will be ordered before or after the patch that removes vma_try_start_write(). If you're backporting this patch to a tree with vma_try_start_write(), make sure this patch changes that function. Link: https://lkml.kernel.org/r/20230721225107.942336-1-jannh@google.com Fixes: 5e31275 ("mm: add per-VMA lock and helper functions to control it") Signed-off-by: Jann Horn <jannh@google.com> Reviewed-by: Suren Baghdasaryan <surenb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c54312 upstream. It was pointed out[1] that using folio_test_hwpoison() is wrong as we need to check the indiviual page that has poison. folio_test_hwpoison() only checks the head page so go back to using PageHWPoison(). User-visible effects include existing hwpoison-inject tests possibly failing as unpoisoning a single subpage could lead to unpoisoning an entire folio. Memory unpoisoning could also not work as expected as the function will break early due to only checking the head page and not the actually poisoned subpage. [1]: https://lore.kernel.org/lkml/ZLIbZygG7LqSI9xe@casper.infradead.org/ Link: https://lkml.kernel.org/r/20230717181812.167757-1-sidhartha.kumar@oracle.com Fixes: a6fddef ("mm/memory-failure: convert unpoison_memory() to folios") Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Reported-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c21e06 upstream. mbind() calls down into vma_replace_policy() without taking the per-VMA locks, replaces the VMA's vma->vm_policy pointer, and frees the old policy. That's bad; a concurrent page fault might still be using the old policy (in vma_alloc_folio()), resulting in use-after-free. Normally this will manifest as a use-after-free read first, but it can result in memory corruption, including because vma_alloc_folio() can call mpol_cond_put() on the freed policy, which conditionally changes the policy's refcount member. This bug is specific to CONFIG_NUMA, but it does also affect non-NUMA systems as long as the kernel was built with CONFIG_NUMA. Signed-off-by: Jann Horn <jannh@google.com> Reviewed-by: Suren Baghdasaryan <surenb@google.com> Fixes: 5e31275 ("mm: add per-VMA lock and helper functions to control it") Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f781f66 upstream. Some Android CTS is testing if the signaling time keeps consistent during merges. v2: use the current time if the fence is still in the signaling path and the timestamp not yet available. v3: improve comment, fix one more case to use the correct timestamp Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230630120041.109216-1-christian.koenig@amd.com Cc: Jindong Yue <jindong.yue@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 00ae149 upstream. Smatch detected potential error pointer dereference. drivers/gpu/drm/drm_syncobj.c:888 drm_syncobj_transfer_to_timeline() error: 'fence' dereferencing possible ERR_PTR() The error pointer comes from dma_fence_allocate_private_stub(). One caller expected error pointers and one expected NULL pointers. Change it to return NULL and update the caller which expected error pointers, drm_syncobj_assign_null_handle(), to check for NULL instead. Fixes: f781f66 ("dma-buf: keep the signaling time of merged fences v3") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/b09f1996-3838-4fa2-9193-832b68262e43@moroto.mountain Cc: Jindong Yue <jindong.yue@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230801091925.659598007@linuxfoundation.org Tested-by: Ronald Warsow <rwarsow@gmx.de> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: SeongJae Park <sj@kernel.org> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Bagas Sanjaya <bagasdotme@gmail.com> Link: https://lore.kernel.org/r/20230802065501.780725463@linuxfoundation.org Tested-by: Chris Paterson (CIP) <chris.paterson2@renesas.com> Tested-by: Ronald Warsow <rwarsow@gmx.de> Tested-by: SeongJae Park <sj@kernel.org> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Bagas Sanjaya <bagasdotme@gmail.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7725aca upstream check_bugs() has become a dumping ground for all sorts of activities to finalize the CPU initialization before running the rest of the init code. Most are empty, a few do actual bug checks, some do alternative patching and some cobble a CPU advertisement string together.... Aside of that the current implementation requires duplicated function declaration and mostly empty header files for them. Provide a new function arch_cpu_finalize_init(). Provide a generic declaration if CONFIG_ARCH_HAS_CPU_FINALIZE_INIT is selected and a stub inline otherwise. This requires a temporary #ifdef in start_kernel() which will be removed along with check_bugs() once the architectures are converted over. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230613224544.957805717@linutronix.de Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c7077a upstream check_bugs() is a dumping ground for finalizing the CPU bringup. Only parts of it has to do with actual CPU bugs. Split it apart into arch_cpu_finalize_init() and cpu_select_mitigations(). Fixup the bogus 32bit comments while at it. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20230613224545.019583869@linutronix.de Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee31bb0 upstream check_bugs() is about to be phased out. Switch over to the new arch_cpu_finalize_init() implementation. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230613224545.078124882@linutronix.de Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c38e30 upstream check_bugs() is about to be phased out. Switch over to the new arch_cpu_finalize_init() implementation. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230613224545.137045745@linutronix.de Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9841c42 upstream check_bugs() is about to be phased out. Switch over to the new arch_cpu_finalize_init() implementation. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230613224545.195288218@linutronix.de Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9ceecc2 upstream check_bugs() is about to be phased out. Switch over to the new arch_cpu_finalize_init() implementation. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20230613224545.254342916@linutronix.de Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f066a2 upstream check_bugs() is about to be phased out. Switch over to the new arch_cpu_finalize_init() implementation. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230613224545.312438573@linutronix.de Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01eb454 upstream check_bugs() is about to be phased out. Switch over to the new arch_cpu_finalize_init() implementation. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230613224545.371697797@linutronix.de Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Michael Aaron Murphy <michael@mmurphy.dev>
The pin fixup is required to detect headset microphones on the oryp5. Fixes: 80690a2 ("ALSA: hda/realtek - Add quirk for Tuxedo XC 1509") Signed-off-by: Tim Crawford <tcrawford@system76.com>
Asus released motherboard(s) with an alternate ALC4080 that lacks a SPDIF jack, and requires applying this map.
The Aorus Xtreme uses the same ID for audio controller, but the maps are very different. This successfully fixes all of the audio jacks on the back.
When plugging of unplugging an audio jack on this motherbaord, sometimes the audio jacks would stop appearing to pipewire/pulseaudio. Interestingly `cat`-ing out the file `/proc/asound/<card number>/codec#0`, and or restarting pipewire fixes the issue temporarily. This PR improves the current functionality by making hotplug with one 3.5mm jack work, it still breaks if hotplug is between multiple jacks though.
https://www.phoronix.com/news/MGLRU-Reaches-mm-stable By cummunity request #214 (comment)
This reverts commit 86f4c65.
This reverts commit b38f2d5.
…02308111154 Signed-off-by: Michael Aaron Murphy <michael@mmurphy.dev>
jackpot51
approved these changes
Aug 14, 2023
|
Looks like |
|
I'm not sure if I should mention this here, but I found out that my oryx pro 4 b, after updating to kernel 6.4.x has issues with displaying any output. Only when I set nomodeset in the kernel parameters am I able to boot up on kernel 6.4.x. Kernel 6.2.x doesn't exhibit this problem. This problem also occurs on other distributions using kernel 6.4.x If anyone of your team is able to reproduce it on their machines, it would be nice if someone could take a look at it. I can also give a dmesg log of the nvidia card crashing on kernel 6.4.x if you are interested. |
|
@Simbaclaws Please open an issue, rather than posting a comment in a PR: https://github.com/pop-os/linux/issues |
|
Apologies, will do |
Merged
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Supersedes #271
Closes #269
Closes #272