Downloads directory: http://digitalcorpora.org/downloads/tcpflow/
To compile for Linux
Be sure you have the necessary precursors. For RedHat based distributions use following command to install them:
# yum -y install git gcc-c++ automake autoconf boost-devel cairo-devel libpcap-devel zlib-devel
If you are working on a Debian based distribution use this:
# sudo apt-get install git gcc g++ automake autoconf libpcap-dev libboost-dev libssl-dev zlib1g-dev libcairo2-dev
Download the release from http://digitalcorpora.org/downloads/tcpflow/. Compile and install with:
./configure
make
sudo make install
If you want do download the development tree with git, be sure to do a complete checkout with --recursive and then run bootstrap.sh, configure and make:
git clone --recursive https://github.com/simsong/tcpflow.git
cd tcpflow
bash bootstrap.sh
./configure
make
sudo make install
To download and compile for Amazon AMI:
ssh ec2-user@<your ec2 instance>
sudo bash yum -y install git make gcc-c++ automake autoconf boost-devel cairo-devel libpcap-devel openssl-devel zlib-devel
git clone --recursive https://github.com/simsong/tcpflow.git
sh bootstrap.sh
To Compile for Windows with mingw on Fedora Core:
yum -y install mingw64-gcc mingw64-gcc-c++ mingw64-boost mingw64-cairo mingw64-zlib
mingw64-configure
make
To use CMake, see detailed instructions: cmake/README.md
From a clean repository as normal user (not root):
./bootstrap.sh # Generates the file ./configure
./configure # Generates the file tcpflow.spec
rpmbuild -bb tcpflow.spec --build-in-place
Check the specfile and resulted RPM:
rpmlint tcpflow.spec
rpmlint ~/rpmbuild/RPMS/x86_64/tcpflow-....rpm
Install:
sudo dnf install ~/rpmbuild/RPMS/x86_64/tcpflow-....rpm
tcpflow is a program that captures data transmitted as part of TCP connections (flows), and stores the data in a way that is convenient for protocol analysis and debugging. Each TCP flow is stored in its own file. Thus, the typical TCP flow will be stored in two files, one for each direction. tcpflow can also process stored 'tcpdump' packet flows.
tcpflow stores all captured data in files that have names of the form:
[timestampT]sourceip.sourceport-destip.destport[--VLAN][cNNNN]
where:
timestamp is an optional timestamp of the time that the first packet was seen
T is a delimiter that indicates a timestamp was provided
sourceip is the source IP address
sourceport is the source port
destip is the destination ip address
destport is the destination port
VLAN is the VLAN port
c is a delimiter indicating that multiple connections are present
NNNN is a connection counter, when there are multiple connections with
the same [time]/sourceip/sourceport/destip/destport combination.
Note that connection counting rarely happens when timestamp prefixing is performed.
HERE are some examples:
128.129.130.131.02345-010.011.012.013.45103
The contents of the above file would be data transmitted from host 128.129.131.131 port 2345, to host 10.11.12.13 port 45103.
128.129.130.131.02345-010.011.012.013.45103c0005
The sixth connection from 128.129.131.131 port 2345, to host 10.11.12.13 port 45103.
1325542703T128.129.130.131.02345-010.011.012.013.45103
A connection from 128.129.131.131 port 2345, to host 10.11.12.13 port 45103, that started on at 5:19pm (-0500) on January 2, 2012
128.129.130.131.02345-010.011.012.013.45103--3
A connection from 128.129.131.131 port 2345, to host 10.11.12.13 port 45103 that was seen on VLAN port 3.
You can change the template that is used to create filenames with the -F and -T options. If a directory appears in the template the directory will be automatically created.
If you use the -a option, tcpflow will automatically interpret HTTP responses.
If the output file is
208.111.153.175.00080-192.168.001.064.37314,
Then the post-processing will create the files:
208.111.153.175.00080-192.168.001.064.37314-HTTP
208.111.153.175.00080-192.168.001.064.37314-HTTPBODY
If the HTTPBODY was compressed with GZIP, you may get a
third file as well:
208.111.153.175.00080-192.168.001.064.37314-HTTPBODY-GZIP
Additional information about these streams, such as their MD5
hash value, is also written to the DFXML file
tcpflow is similar to 'tcpdump', in that both process packets from the wire or from a stored file. But it's different in that it reconstructs the actual data streams and stores each flow in a separate file for later analysis.
tcpflow understands sequence numbers and will correctly reconstruct data streams regardless of retransmissions or out-of-order delivery. However, tcpflow currently does not understand IP fragments; flows containing IP fragments will not be recorded properly.
tcpflow can output a summary report file in DFXML format. This file includes information about the system on which the tcpflow program was compiled, where it was run, and every TCP flow, including source and destination IP addresses and ports, number of bytes, number of packets, and (optionally) the MD5 hash of every bytestream.
tcpflow uses the LBL Packet Capture Library (available at ftp://ftp.ee.lbl.gov/libpcap.tar.Z) and therefore supports the same rich filtering expressions that programs like 'tcpdump' support. It should compile under most popular versions of UNIX; see the INSTALL file for details.
tcpflow is a useful tool for understanding network packet flows and performing network forensics. Unlike programs such as WireShark, which show lots of packets or a single TCP connection, tcpflow can show hundreds, thousands, or hundreds of thousands of TCP connections in context.
A common use of tcpflow is to reveal the contents of HTTP sessions. Using tcpflow you can reconstruct web pages downloaded over HTTP. You can even extract malware delivered as 'drive-by downloads.'
Jeremy Elson originally wrote this program to capture the data being sent by various programs that use undocumented network protocols in an attempt to reverse engineer those protocols. RealPlayer (and most other streaming media players), ICQ, and AOL IM are good examples of this type of application. It was later used for HTTP protocol analysis.
Simson Garfinkel founded Sandstorm Enterprises in 1998. Sandstorm created a program similar to tcpflow called TCPDEMUX and another version of the program called NetIntercept. Those programs are commercial. After Simson left Sandstorm he had need for a tcp flow reassembling program. He found tcpflow and took over its maintenance.
Please enter bugs on the github issue tracker
tcpflow currently does not understand IP fragments. Flows containing IP fragments will not be recorded correctly. IP fragmentation is increasingly a rare event, so this does not seem to be a significant problem.
Simson L. Garfinkel simsong@acm.org
Thanks to:
- Jeffrey Pang, for the radiotap implementation
- Doug Madory, for the Wifi parser
- Jeremy Elson, for the Original idea and initial tcp/ip implementation