Preserve header casing. Take two. 🎬

docs/source/api.rst

@@ -128,6 +128,21 @@ have a newline inside a header value, and ``Content-Length: hello`` is
 an error because `Content-Length` should always be an integer. We may
 add additional checks in the future.
 
+While we make sure to expose header names as lowercased bytes, we also
+preserve the original header casing that is used. Compliant HTTP
+agents should always treat headers in a case insensitive manner, but
+this may not always be the case. When sending bytes over the wire we
+send headers preserving whatever original header casing was used.
+
+It is possible to access the headers in their raw original casing,
+which may be useful for some user output or debugging purposes.
+
+.. ipython:: python
+
+    original_headers = [("Host", "example.com")]
+    req = h11.Request(method="GET", target="/", headers=original_headers)
+    req.headers.raw_items()
+
 .. _http_version-format:
 
 It's not just headers we normalize to being byte-strings: the same

h11/_connection.py

@@ -534,7 +534,7 @@ def send_failed(self):
     def _clean_up_response_headers_for_sending(self, response):
         assert type(response) is Response
 
-        headers = list(response.headers)
+        headers = response.headers
         need_close = False
 
         # HEAD requests need some special handling: they always act like they
@@ -560,27 +560,27 @@ def _clean_up_response_headers_for_sending(self, response):
             # but the HTTP spec says that if our peer does this then we have
             # to fix it instead of erroring out, so we'll accord the user the
             # same respect).
-            set_comma_header(headers, b"content-length", [])
+            headers = set_comma_header(headers, b"content-length", [])
             if self.their_http_version is None or self.their_http_version < b"1.1":
                 # Either we never got a valid request and are sending back an
                 # error (their_http_version is None), so we assume the worst;
                 # or else we did get a valid HTTP/1.0 request, so we know that
                 # they don't understand chunked encoding.
-                set_comma_header(headers, b"transfer-encoding", [])
+                headers = set_comma_header(headers, b"transfer-encoding", [])
                 # This is actually redundant ATM, since currently we
                 # unconditionally disable keep-alive when talking to HTTP/1.0
                 # peers. But let's be defensive just in case we add
                 # Connection: keep-alive support later:
                 if self._request_method != b"HEAD":
                     need_close = True
             else:
-                set_comma_header(headers, b"transfer-encoding", ["chunked"])
+                headers = set_comma_header(headers, b"transfer-encoding", ["chunked"])
 
         if not self._cstate.keep_alive or need_close:
             # Make sure Connection: close is set
             connection = set(get_comma_header(headers, b"connection"))
             connection.discard(b"keep-alive")
             connection.add(b"close")
-            set_comma_header(headers, b"connection", sorted(connection))
+            headers = set_comma_header(headers, b"connection", sorted(connection))
 
         response.headers = headers

h11/_headers.py

@@ -62,6 +62,59 @@
 _field_value_re = re.compile(field_value.encode("ascii"))
 
 
+class Headers:
+    """
+    A list-like interface that allows iterating over headers as byte-pairs
+    of (lowercased-name, value).
+
+    Internally we actually store the representation as three-tuples,
+    including both the raw original casing, in order to preserve casing
+    over-the-wire, and the lowercased name, for case-insensitive comparisions.
+
+    r = Request(
+        method="GET",
+        target="/",
+        headers=[("Host", "example.org"), ("Connection", "keep-alive")],
+        http_version="1.1",
+    )
+    assert r.headers == [
+        (b"host", b"example.org"),
+        (b"connection", b"keep-alive")
+    ]
+    assert r.headers.raw_items() == [
+        (b"Host", b"example.org"),
+        (b"Connection", b"keep-alive")
+    ]
+    """
+    __slots__ = '_full_items'
+
+    def __init__(self, full_items):
+        self._full_items = full_items
+
+    def __iter__(self):
+        for _, name, value in self._full_items:
+            yield name, value
+
+    def __bool__(self):
+        return bool(self._full_items)
+
+    def __eq__(self, other):
+        return list(self) == list(other)
+
+    def __len__(self):
+        return len(self._full_items)
+
+    def __repr__(self):
+        return "<Headers(%s)>" % repr(list(self))
+
+    def __getitem__(self, idx):
+         _, name, value = self._full_items[idx]
+         return (name, value)
+
+    def raw_items(self):
+        return [(raw_name, value) for raw_name, _, value in self._full_items]
+
+
 def normalize_and_validate(headers, _parsed=False):
     new_headers = []
     saw_content_length = False
@@ -75,6 +128,7 @@ def normalize_and_validate(headers, _parsed=False):
             value = bytesify(value)
             validate(_field_name_re, name, "Illegal header name {!r}", name)
             validate(_field_value_re, value, "Illegal header value {!r}", value)
+        raw_name = name
         name = name.lower()
         if name == b"content-length":
             if saw_content_length:
@@ -99,8 +153,8 @@ def normalize_and_validate(headers, _parsed=False):
                     error_status_hint=501,
                 )
             saw_transfer_encoding = True
-        new_headers.append((name, value))
-    return new_headers
+        new_headers.append((raw_name, name, value))
+    return Headers(new_headers)
 
 
 def get_comma_header(headers, name):
@@ -140,7 +194,7 @@ def get_comma_header(headers, name):
     # "100-continue". Splitting on commas is harmless. Case insensitive.
     #
     out = []
-    for found_name, found_raw_value in headers:
+    for _, found_name, found_raw_value in headers._full_items:
         if found_name == name:
             found_raw_value = found_raw_value.lower()
             for found_split_value in found_raw_value.split(b","):
@@ -153,12 +207,12 @@ def get_comma_header(headers, name):
 def set_comma_header(headers, name, new_values):
     # The header name `name` is expected to be lower-case bytes.
     new_headers = []
-    for found_name, found_raw_value in headers:
+    for found_raw_name, found_name, found_raw_value in headers._full_items:
         if found_name != name:
-            new_headers.append((found_name, found_raw_value))
+            new_headers.append((found_raw_name, found_raw_value))
     for new_value in new_values:
-        new_headers.append((name, new_value))
-    headers[:] = normalize_and_validate(new_headers)
+        new_headers.append((name.title(), new_value))
+    return normalize_and_validate(new_headers)
 
 
 def has_expect_100_continue(request):

h11/_readers.py

@@ -58,7 +58,9 @@ def _decode_header_lines(lines):
         # Python 3, validate() takes either and returns matches as bytes. But
         # on Python 2, validate can return matches as bytearrays, so we have
         # to explicitly cast back.
-        matches = validate(header_field_re, bytes(line), "illegal header line: {!r}", bytes(line))
+        matches = validate(
+            header_field_re, bytes(line), "illegal header line: {!r}", bytes(line)
+        )
         yield (matches["field_name"], matches["field_value"])
 
 
@@ -71,7 +73,9 @@ def maybe_read_from_IDLE_client(buf):
         return None
     if not lines:
         raise LocalProtocolError("no request line received")
-    matches = validate(request_line_re, lines[0], "illegal request line: {!r}", lines[0])
+    matches = validate(
+        request_line_re, lines[0], "illegal request line: {!r}", lines[0]
+    )
     return Request(
         headers=list(_decode_header_lines(lines[1:])), _parsed=True, **matches
     )
@@ -152,7 +156,12 @@ def __call__(self, buf):
             chunk_header = buf.maybe_extract_until_next(b"\r\n")
             if chunk_header is None:
                 return None
-            matches = validate(chunk_header_re, chunk_header, "illegal chunk header: {!r}", chunk_header)
+            matches = validate(
+                chunk_header_re,
+                chunk_header,
+                "illegal chunk header: {!r}",
+                chunk_header,
+            )
             # XX FIXME: we discard chunk extensions. Does anyone care?
             # We convert to bytes because Python 2's `int()` function doesn't
             # work properly on bytearray objects.

h11/_writers.py

@@ -38,12 +38,13 @@ def write_headers(headers, write):
     # "Since the Host field-value is critical information for handling a
     # request, a user agent SHOULD generate Host as the first header field
     # following the request-line." - RFC 7230
-    for name, value in headers:
+    raw_items = headers._full_items
+    for raw_name, name, value in raw_items:
         if name == b"host":
-            write(bytesmod(b"%s: %s\r\n", (name, value)))
-    for name, value in headers:
+            write(bytesmod(b"%s: %s\r\n", (raw_name, value)))
+    for raw_name, name, value in raw_items:
         if name != b"host":
-            write(bytesmod(b"%s: %s\r\n", (name, value)))
+            write(bytesmod(b"%s: %s\r\n", (raw_name, value)))
     write(b"\r\n")
 
 

h11/tests/test_connection.py

@@ -96,7 +96,7 @@ def test_Connection_basics_and_content_length():
         ),
     )
     assert data == (
-        b"GET / HTTP/1.1\r\n" b"host: example.com\r\n" b"content-length: 10\r\n\r\n"
+        b"GET / HTTP/1.1\r\n" b"Host: example.com\r\n" b"Content-Length: 10\r\n\r\n"
     )
 
     for conn in p.conns:
@@ -113,7 +113,7 @@ def test_Connection_basics_and_content_length():
     assert data == b"HTTP/1.1 100 \r\n\r\n"
 
     data = p.send(SERVER, Response(status_code=200, headers=[("Content-Length", "11")]))
-    assert data == b"HTTP/1.1 200 \r\ncontent-length: 11\r\n\r\n"
+    assert data == b"HTTP/1.1 200 \r\nContent-Length: 11\r\n\r\n"
 
     for conn in p.conns:
         assert conn.states == {CLIENT: SEND_BODY, SERVER: SEND_BODY}
@@ -243,7 +243,7 @@ def test_server_talking_to_http10_client():
     # We automatically Connection: close back at them
     assert (
         c.send(Response(status_code=200, headers=[]))
-        == b"HTTP/1.1 200 \r\nconnection: close\r\n\r\n"
+        == b"HTTP/1.1 200 \r\nConnection: close\r\n\r\n"
     )
 
     assert c.send(Data(data=b"12345")) == b"12345"
@@ -303,7 +303,7 @@ def test_automatic_transfer_encoding_in_response():
         receive_and_get(c, b"GET / HTTP/1.0\r\n\r\n")
         assert (
             c.send(Response(status_code=200, headers=user_headers))
-            == b"HTTP/1.1 200 \r\nconnection: close\r\n\r\n"
+            == b"HTTP/1.1 200 \r\nConnection: close\r\n\r\n"
         )
         assert c.send(Data(data=b"12345")) == b"12345"
 
@@ -876,7 +876,7 @@ def test_errors():
         if role is SERVER:
             assert (
                 c.send(Response(status_code=400, headers=[]))
-                == b"HTTP/1.1 400 \r\nconnection: close\r\n\r\n"
+                == b"HTTP/1.1 400 \r\nConnection: close\r\n\r\n"
             )
 
     # After an error sending, you can no longer send
@@ -988,14 +988,14 @@ def setup(method, http_version):
         c = setup(method, b"1.1")
         assert (
             c.send(Response(status_code=200, headers=[])) == b"HTTP/1.1 200 \r\n"
-            b"transfer-encoding: chunked\r\n\r\n"
+            b"Transfer-Encoding: chunked\r\n\r\n"
         )
 
         # No Content-Length, HTTP/1.0 peer, frame with connection: close
         c = setup(method, b"1.0")
         assert (
             c.send(Response(status_code=200, headers=[])) == b"HTTP/1.1 200 \r\n"
-            b"connection: close\r\n\r\n"
+            b"Connection: close\r\n\r\n"
         )
 
         # Content-Length + Transfer-Encoding, TE wins
@@ -1011,7 +1011,7 @@ def setup(method, http_version):
                 )
             )
             == b"HTTP/1.1 200 \r\n"
-            b"transfer-encoding: chunked\r\n\r\n"
+            b"Transfer-Encoding: chunked\r\n\r\n"
         )
 
 

h11/tests/test_events.py

@@ -163,3 +163,19 @@ def test_intenum_status_code():
     assert r.status_code == HTTPStatus.OK
     assert type(r.status_code) is not type(HTTPStatus.OK)
     assert type(r.status_code) is int
+
+
+def test_header_casing():
+    r = Request(
+        method="GET",
+        target="/",
+        headers=[("Host", "example.org"), ("Connection", "keep-alive")],
+        http_version="1.1",
+    )
+    assert len(r.headers) == 2
+    assert r.headers[0] == (b"host", b"example.org")
+    assert r.headers == [(b"host", b"example.org"), (b"connection", b"keep-alive")]
+    assert r.headers.raw_items() == [
+        (b"Host", b"example.org"),
+        (b"Connection", b"keep-alive"),
+    ]

h11/tests/test_headers.py

@@ -83,7 +83,7 @@ def test_get_set_comma_header():
 
     assert get_comma_header(headers, b"connection") == [b"close", b"foo", b"bar"]
 
-    set_comma_header(headers, b"newthing", ["a", "b"])
+    headers = set_comma_header(headers, b"newthing", ["a", "b"])
 
     with pytest.raises(LocalProtocolError):
         set_comma_header(headers, b"newthing", ["  a", "b"])
@@ -96,7 +96,7 @@ def test_get_set_comma_header():
         (b"newthing", b"b"),
     ]
 
-    set_comma_header(headers, b"whatever", ["different thing"])
+    headers = set_comma_header(headers, b"whatever", ["different thing"])
 
     assert headers == [
         (b"connection", b"close"),

h11/tests/test_io.py

@@ -1,7 +1,7 @@
 import pytest
 
 from .._events import *
-from .._headers import normalize_and_validate
+from .._headers import normalize_and_validate, Headers
 from .._readers import (
     _obsolete_line_fold,
     ChunkedReader,
@@ -31,12 +31,12 @@
             target="/a",
             headers=[("Host", "foo"), ("Connection", "close")],
         ),
-        b"GET /a HTTP/1.1\r\nhost: foo\r\nconnection: close\r\n\r\n",
+        b"GET /a HTTP/1.1\r\nHost: foo\r\nConnection: close\r\n\r\n",
     ),
     (
         (SERVER, SEND_RESPONSE),
         Response(status_code=200, headers=[("Connection", "close")], reason=b"OK"),
-        b"HTTP/1.1 200 OK\r\nconnection: close\r\n\r\n",
+        b"HTTP/1.1 200 OK\r\nConnection: close\r\n\r\n",
     ),
     (
         (SERVER, SEND_RESPONSE),
@@ -48,7 +48,7 @@
         InformationalResponse(
             status_code=101, headers=[("Upgrade", "websocket")], reason=b"Upgrade"
         ),
-        b"HTTP/1.1 101 Upgrade\r\nupgrade: websocket\r\n\r\n",
+        b"HTTP/1.1 101 Upgrade\r\nUpgrade: websocket\r\n\r\n",
     ),
     (
         (SERVER, SEND_RESPONSE),
@@ -121,7 +121,7 @@ def test_writers_unusual():
         normalize_and_validate([("foo", "bar"), ("baz", "quux")]),
         b"foo: bar\r\nbaz: quux\r\n\r\n",
     )
-    tw(write_headers, [], b"\r\n")
+    tw(write_headers, Headers([]), b"\r\n")
 
     # We understand HTTP/1.0, but we don't speak it
     with pytest.raises(LocalProtocolError):
@@ -435,7 +435,7 @@ def test_ChunkedWriter():
 
     assert (
         dowrite(w, EndOfMessage(headers=[("Etag", "asdf"), ("a", "b")]))
-        == b"0\r\netag: asdf\r\na: b\r\n\r\n"
+        == b"0\r\nEtag: asdf\r\na: b\r\n\r\n"
     )
 
 
@@ -503,5 +503,5 @@ def test_host_comes_first():
     tw(
         write_headers,
         normalize_and_validate([("foo", "bar"), ("Host", "example.com")]),
-        b"host: example.com\r\nfoo: bar\r\n\r\n",
+        b"Host: example.com\r\nfoo: bar\r\n\r\n",
     )