Tensorflow (1.13) implementation of the CAPE model, a Mesh-CVAE with a mesh patch discriminator, for dressing SMPL bodies with pose-dependent clothing, introduced in the CVPR 2020 paper:
Learning to Dress 3D People in Generative Clothing
Qianli Ma, Jinlong Yang, Anurag Ranjan, Sergi Pujades, Gerard Pons-Moll, Siyu Tang, and Michael. J. Black
Full paper | Paper in 1 min | Paper in 4 min | New dataset | Project website
In case you do not have a suitable GPU environment to run the CAPE code, we offer a demo on Google Colab. It generates and visualizes the 3D geometry of the clothed SMPL meshes:
For the full demo and training, follow the next steps.
We recommend creating a new virtual environment for a clean installation of the dependencies. All following commands are assumed to be executed within this virtual environment. The code has been tested on Ubuntu 18.04, python 3.6 and CUDA 10.0.
python3 -m venv $HOME/.virtualenvs/cape
source $HOME/.virtualenvs/cape/bin/activate
pip install -U pip setuptools- Install PSBody Mesh package. Currently we recommend installing version 0.3.
pip install -r requirements.txt- Download the SMPL body model (Note: use the version 1.0.0 with 10 shape PCs), and place the
.pklfiles for both genders and put them in/body_models/smpl/. Follow the instructions to remove the Chumpy objects from both model pkls. pip install numpy==1.16.2(do this at last to ensurenumpy==1.16.2).
- Download the SMPL body model as described above.
cd CAPE && mkdir checkpoints- Download our pre-trained demo model and put the downloaded folder under the
checkpointsfolder. Then run:
python main.py --config configs/CAPE-affineconv_nz64_pose32_clotype32_male.yaml --mode demoIt will generate a few clothed body meshes in the results/ folder and show on-screen visualization.
Here we assume that the CAPE dataset is downloaded. The "raw" data are stored as an .npz file per frame. We are going to pack these data into dataset(s) that can be used to train the network. For example, the following command
python lib/prep_data.py <path_to_downloaded_CAPE_dataset> --ds_name dataset_male_4clotypes --phase bothwill create a dataset named dataset_male_4clotypes, both the training and test splits, under data/datasets/dataset_male_4clotypes. This dataset contains 31036 training and 5128 test examples. Similarly, setting --ds_name dataset_female_4clotypes will create the female dataset that contains 21090 training and 5441 test examples.
To customize the packed dataset, simply edit the dataset_config_dicts defined in data/dataset_configs.py for your subject / clothing type / sequences of interest.
Once the dataset is packed, we are ready for training! Give a name to the experiment (will be used to save / load checkpoints and for Tensorboard etc.), specify the genders (here assume we train a male model), and run:
python main.py --config configs/config.yaml --name <exp_name> --mode trainThe training will start. You can watch the training process by running Tensorboard in summaries/<exp_name>. At the end of training it will automatically evaluate on the test split and run the generation demos.
To customize the architecture and training, check the arguments defined in config_parser.py, and set them either in configs/config.yaml or directly in command line by--[some argument] <value>.
Change the --mode flag to demo to run the auto-encoding evaluation. It will also run the generation demos.
python main.py --config configs/config.yaml --name <exp_name> --gender <gender> --mode demoThe public release of the CAPE dataset slightly differs from what we used in the paper due to the removal of faulty / corrupted frames. Therefore we retrained our model on the dataset_male_4clotypes and dataset_female_4clotypes datasets packed as shown above, and report the performance in terms of per-vertex auto-encoding Eucledian errors (in mm).
On male dataset:
| Method | PCA | CoMA-4* | CoMA-1* | CAPE | CAPE-affine_conv** |
|---|---|---|---|---|---|
| error mean | 7.13 ± 5.27 | 7.32 ± 5.57 | 6.50 ± 5.35 | 6.15 ± 5.30 | 6.03 ± 5.18 |
| medians | 5.79 | 5.85 | 5.02 | 4.64 | 4.54 |
On female dataset:
| Method | PCA | CoMA-4 | CoMA-1 | CAPE | CAPE-affine_conv |
|---|---|---|---|---|---|
| error mean | 3.87 ± 3.02 | 4.38 ± 3.33 | 3.86 ± 3.09 | 3.61 ± 3.01 | 3.58 ± 2.94 |
| medians | 3.10 | 3.55 | 3.07 | 2.82 | 2.82 |
* CoMA-X stands for the model by Ranjan et al. with a spatial downsampling rate X at each downsample layer.
** CAPE-affine_conv uses an improved mesh-residual block based on the idea of this CVPR2020 paper, instead of our original mesh residual block. It achieves improved results and is faster in training. To use this layer, use the flag --affine 1 in training.
The latent space dimension used in the paper and numbers above (set by flag --nz) is 18 to balance the size of the model and performance, but at a price of losing some clothing details. Increasing the latent dimension brings significant better wrinkles and edges. We also provide the model checkpoints trained with --nz 64 --nz_cond 32 --nz_cond2 32 --affine 1, see below.
Our pretrained models on the above two datasets can be downloaded here. Their corresponding configuration yaml files are already in configs/ folder, with the same name as the name of each checkpoint folder.
To run evaluation / demo from the pretrained models, put the downloaded folder(s) under the checkpoints folder, and run the evaluation command, e. g.:
python main.py --config configs/CAPE-affineconv_nz18_pose24_clotype8_male.yaml --mode demoTogether with the model, we introduce the new CAPE dataset, a large scale 3D mesh dataset of clothed humans in motion. It contains 150K dynamnic clothed human mesh registrations from real scan data, with consistent topology. We also provide precise body shape under clothing, SMPL pose parameters and clothing displacements for all data frames, as well as handy code to process the data. Check it out at our project website!
05/08/2020 A Google Colab demo is added!
28/07/2020 Data packing and training scripts added! Also added a few new features. Check the changelog for more details.
26/07/2020 Updated the link to the pretrained checkpoint (previous one was faulty and generates weird shapes); minor bug fixes in the group norm param loading.
Software Copyright License for non-commercial scientific research purposes. Please read carefully the terms and conditions and any accompanying documentation before you download and/or use the CAPE data and software, (the "Dataset & Software"), including 3D meshes, pose parameters, scripts, and animations. By downloading and/or using the Model & Software (including downloading, cloning, installing, and any other use of this github repository), you acknowledge that you have read these terms and conditions, understand them, and agree to be bound by them. If you do not agree with these terms and conditions, you must not download and/or use the Model & Software. Any infringement of the terms of this agreement will automatically terminate your rights under this License.
The SMPL body related files data/{template_mesh.obj, edges_smpl.npy} are subject to the license of the SMPL model. The PSBody mesh package and smplx python package are subject to their own licenses.
If you find our code / paper / data useful to your research, please consider citing:
@inproceedings{ma2020cape,
title = {Learning to Dress 3D People in Generative Clothing},
author = {Ma, Qianli and Yang, Jinlong and Ranjan, Anurag and Pujades, Sergi and Pons-Moll, Gerard and Tang, Siyu and Black, Michael J.},
booktitle = {Computer Vision and Pattern Recognition (CVPR)},
month = jun,
year = {2020},
month_numeric = {6}
}SCALE (CVPR 2021): We use a novel explicit representation --- hundreds of local surface patches -- to model pose-dependent deformation of humans in clothing, including those wearing jackets and skirts!
SCANimate (CVPR 2021): Trained on the CAPE dataset, we use implicit functions to build avatars directly from raw scans, with pose-dependent clothing deformation, without the need for surface registration or clothing/body template. Check it out!
CoMA (ECCV 2018): Our (non-conditional) convolutional mesh autoencoder for modeling extreme facial expressions. The codes of the CAPE repository are based on the repository of CoMA. If you find the code of this repository useful, please consider also citing CoMA.
ClothCap (SIGGRAPH 2017): Our method of capturing and registering clothed humans from 4D scans. The CAPE dataset released with our paper incorporates the scans and registrations from ClothCap. Check out our project website for the data!
