Duplicate board files for blok converter (#20629)

* Duplicate board files for blok converter

* Swap converters board file too

* Update platforms/chibios/boards/QMK_BLOK/configs/board.h

data/mappings/defaults.hjson

@@ -33,7 +33,7 @@
         "blok": {
             "processor": "RP2040",
             "bootloader": "rp2040",
-            "board": "QMK_PM2040"
+            "board": "QMK_BLOK"
         },
         "michi": {
             "processor": "RP2040",

platforms/chibios/boards/QMK_BLOK/board/board.mk

@@ -0,0 +1,9 @@
+# List of all the board related files.
+BOARDSRC = $(CHIBIOS)/os/hal/boards/RP_PICO_RP2040/board.c
+
+# Required include directories
+BOARDINC = $(CHIBIOS)/os/hal/boards/RP_PICO_RP2040
+
+# Shared variables
+ALLCSRC += $(BOARDSRC) 
+ALLINC  += $(BOARDINC)

platforms/chibios/boards/QMK_BLOK/configs/board.h

@@ -0,0 +1,12 @@
+// Copyright 2022 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include_next <board.h>
+
+#undef BOARD_RP_PICO_RP2040
+#define BOARD_PM2040
+
+#undef BOARD_NAME
+#define BOARD_NAME "Blok"

platforms/chibios/boards/QMK_BLOK/configs/chconf.h

@@ -0,0 +1,13 @@
+// Copyright 2022 Stefan Kerkmann
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#define CH_CFG_SMP_MODE                     TRUE
+#define CH_CFG_ST_RESOLUTION                32
+#define CH_CFG_ST_FREQUENCY                 1000000
+#define CH_CFG_INTERVALS_SIZE               32
+#define CH_CFG_TIME_TYPES_SIZE              32
+#define CH_CFG_ST_TIMEDELTA                 20
+
+#include_next <chconf.h>

platforms/chibios/boards/QMK_BLOK/configs/config.h

@@ -0,0 +1,21 @@
+// Copyright 2022 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#ifndef I2C_DRIVER
+#    define I2C_DRIVER I2CD0
+#endif
+#ifndef I2C1_SDA_PIN
+#    define I2C1_SDA_PIN D1
+#endif
+#ifndef I2C1_SCL_PIN
+#    define I2C1_SCL_PIN D0
+#endif
+
+#ifndef RP2040_BOOTLOADER_DOUBLE_TAP_RESET
+#    define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
+#endif
+#ifndef RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT
+#    define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 500U
+#endif

platforms/chibios/boards/QMK_BLOK/configs/halconf.h

@@ -0,0 +1,10 @@
+// Copyright 2022 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#define HAL_USE_ADC TRUE
+#define HAL_USE_I2C TRUE
+#define HAL_USE_SPI TRUE
+
+#include_next <halconf.h>

platforms/chibios/boards/QMK_BLOK/configs/mcuconf.h

@@ -0,0 +1,112 @@
+/*
+    ChibiOS - Copyright (C) 2006..2021 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * RP2040_MCUCONF drivers configuration.
+ *
+ * IRQ priorities:
+ * 3...0        Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...1        Lowest...Highest.
+ */
+
+#define RP2040_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define RP_NO_INIT                          FALSE
+#define RP_CORE1_START                      FALSE
+#define RP_CORE1_VECTORS_TABLE              _vectors
+#define RP_CORE1_ENTRY_POINT                _crt0_c1_entry
+#define RP_CORE1_STACK_END                  __c1_main_stack_end__
+
+/*
+ * IRQ system settings.
+ */
+#define RP_IRQ_SYSTICK_PRIORITY             2
+#define RP_IRQ_TIMER_ALARM0_PRIORITY        2
+#define RP_IRQ_TIMER_ALARM1_PRIORITY        2
+#define RP_IRQ_TIMER_ALARM2_PRIORITY        2
+#define RP_IRQ_TIMER_ALARM3_PRIORITY        2
+#define RP_IRQ_ADC1_PRIORITY                3
+#define RP_IRQ_UART0_PRIORITY               3
+#define RP_IRQ_UART1_PRIORITY               3
+#define RP_IRQ_SPI0_PRIORITY                2
+#define RP_IRQ_SPI1_PRIORITY                2
+#define RP_IRQ_USB0_PRIORITY                3
+#define RP_IRQ_I2C0_PRIORITY                2
+#define RP_IRQ_I2C1_PRIORITY                2
+
+/*
+ * ADC driver system settings.
+ */
+#define RP_ADC_USE_ADC1                     TRUE
+
+/*
+ * SIO driver system settings.
+ */
+#define RP_SIO_USE_UART0                    FALSE
+#define RP_SIO_USE_UART1                    FALSE
+
+/*
+ * SPI driver system settings.
+ */
+#define RP_SPI_USE_SPI0                     TRUE
+#define RP_SPI_USE_SPI1                     FALSE
+#define RP_SPI_SPI0_RX_DMA_CHANNEL          RP_DMA_CHANNEL_ID_ANY
+#define RP_SPI_SPI0_TX_DMA_CHANNEL          RP_DMA_CHANNEL_ID_ANY
+#define RP_SPI_SPI1_RX_DMA_CHANNEL          RP_DMA_CHANNEL_ID_ANY
+#define RP_SPI_SPI1_TX_DMA_CHANNEL          RP_DMA_CHANNEL_ID_ANY
+#define RP_SPI_SPI0_DMA_PRIORITY            1
+#define RP_SPI_SPI1_DMA_PRIORITY            1
+#define RP_SPI_DMA_ERROR_HOOK(spip)
+
+/*
+ * PWM driver system settings.
+ */
+#define RP_PWM_USE_PWM0                     FALSE
+#define RP_PWM_USE_PWM1                     FALSE
+#define RP_PWM_USE_PWM2                     FALSE
+#define RP_PWM_USE_PWM3                     FALSE
+#define RP_PWM_USE_PWM4                     FALSE
+#define RP_PWM_USE_PWM5                     FALSE
+#define RP_PWM_USE_PWM6                     FALSE
+#define RP_PWM_USE_PWM7                     FALSE
+#define RP_PWM_IRQ_WRAP_NUMBER_PRIORITY     3
+
+/*
+ * I2C driver system settings.
+ */
+#define RP_I2C_USE_I2C0                     TRUE
+#define RP_I2C_USE_I2C1                     FALSE
+#define RP_I2C_BUSY_TIMEOUT                 50
+#define RP_I2C_ADDRESS_MODE_10BIT           FALSE
+
+/*
+ * USB driver system settings.
+ */
+#define RP_USB_USE_USBD0                    TRUE
+#define RP_USB_FORCE_VBUS_DETECT            TRUE
+#define RP_USE_EXTERNAL_VBUS_DETECT         FALSE
+#define RP_USB_USE_SOF_INTR                 TRUE
+#define RP_USB_USE_ERROR_DATA_SEQ_INTR      FALSE
+
+#endif /* MCUCONF_H */

platforms/chibios/converters/promicro_to_blok/converter.mk

@@ -1,6 +1,6 @@
 # Boardsource Blok MCU settings for converting AVR projects
 MCU := RP2040
-BOARD := QMK_PM2040
+BOARD := QMK_BLOK
 BOOTLOADER := rp2040
 
 # These are defaults based on what has been implemented for RP2040 boards