Skip to content

Commit

Permalink
[Keyboard] Add Scotto36 handwired keyboard (#21104)
Browse files Browse the repository at this point in the history 
Co-authored-by: Albert Y <76888457+filterpaper@users.noreply.github.com>
  • Loading branch information
@joe-scotto @filterpaper
joe-scotto and filterpaper authored Jun 6, 2023
1 parent eaef139 commit 97014f0
Show file tree
Hide file tree
Showing 9 changed files with 492 additions and 7 deletions.
19 changes: 12 additions & 7 deletions keyboards/handwired/jscotto/scotto36/readme.md
View file
Original file line number Diff line number Diff line change
Expand Up @@ -2,11 +2,11 @@

![Scotto36](https://i.imgur.com/MCGv0ZHh.jpeg)

A 36 key handwired ortholinear ergo keyboard. Featuring an OLED display with Bongo Cat. Case files available [here](https://github.com/joe-scotto/keyboards.git).
A 36-key split monoblock ergonomic ortholinear keyboard with 15° of angle on each half. Case files available [here](https://github.com/joe-scotto/keyboards.git).

- Keyboard Maintainer: [Joe Scotto](https://github.com/joe-scotto)
- Hardware Supported: ATmega32U4
- Hardware Availability: [Amazon](https://amazon.com)
* Keyboard Maintainer: [Joe Scotto](https://github.com/joe-scotto)
* Hardware Supported: ATmega32U4, 0.91” 128x32 I2C OLED
* Hardware Availability: [Amazon](https://amazon.com)


# Compiling
Expand All @@ -19,7 +19,12 @@ Flashing example for this keyboard:

make handwired/jscotto/scotto36:default

# Bootloader
Uses [bootmagic](https://github.com/qmk/qmk_firmware/blob/master/docs/feature_bootmagic.md) allowing you to hold the top left key (0, 0) when plugging the board in to enter bootloader mode.

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

## Bootloader

Enter the bootloader in 3 ways:

* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
76 changes: 76 additions & 0 deletions keyboards/handwired/scottokeebs/scotto36/info.json
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,76 @@
{
"manufacturer": "ScottoKeebs",
"keyboard_name": "Scotto36",
"maintainer": "joe-scotto",
"diode_direction": "COL2ROW",
"development_board": "promicro",
"features": {
"bootmagic": true,
"command": false,
"console": false,
"extrakey": true,
"mousekey": true,
"nkro": true
},
"matrix_pins": {
// 4, 5, 6, 7, 8, 9, A3, A2, A1, A0
"cols": ["D4", "C6", "D7", "E6", "B4", "B5", "F4", "F5", "F6", "F7"],
// 15, 14, 16, 10
"rows": ["B1", "B3", "B2", "B6"]
},
"url": "https://scottokeebs.com",
"usb": {
"device_version": "1.0.0",
"pid": "0x0002",
"vid": "0x534B"
},
"community_layouts": ["split_3x5_3"],
"layouts": {
"LAYOUT_split_3x5_3": {
"layout": [
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [0, 1], "x": 1, "y": 0},
{"matrix": [0, 2], "x": 2, "y": 0},
{"matrix": [0, 3], "x": 3, "y": 0},
{"matrix": [0, 4], "x": 4, "y": 0},
{"matrix": [0, 5], "x": 5, "y": 0},
{"matrix": [0, 6], "x": 6, "y": 0},
{"matrix": [0, 7], "x": 7, "y": 0},
{"matrix": [0, 8], "x": 8, "y": 0},
{"matrix": [0, 9], "x": 9, "y": 0},

// Row 2
{"matrix": [1, 0], "x": 0, "y": 1},
{"matrix": [1, 1], "x": 1, "y": 1},
{"matrix": [1, 2], "x": 2, "y": 1},
{"matrix": [1, 3], "x": 3, "y": 1},
{"matrix": [1, 4], "x": 4, "y": 1},
{"matrix": [1, 5], "x": 5, "y": 1},
{"matrix": [1, 6], "x": 6, "y": 1},
{"matrix": [1, 7], "x": 7, "y": 1},
{"matrix": [1, 8], "x": 8, "y": 1},
{"matrix": [1, 9], "x": 9, "y": 1},

// Row 3
{"matrix": [2, 0], "x": 0, "y": 2},
{"matrix": [2, 1], "x": 1, "y": 2},
{"matrix": [2, 2], "x": 2, "y": 2},
{"matrix": [2, 3], "x": 3, "y": 2},
{"matrix": [2, 4], "x": 4, "y": 2},
{"matrix": [2, 5], "x": 5, "y": 2},
{"matrix": [2, 6], "x": 6, "y": 2},
{"matrix": [2, 7], "x": 7, "y": 2},
{"matrix": [2, 8], "x": 8, "y": 2},
{"matrix": [2, 9], "x": 9, "y": 2},

// Row 4
{"matrix": [3, 2], "x": 2, "y": 3},
{"matrix": [3, 3], "x": 3, "y": 3},
{"matrix": [3, 4], "x": 4, "y": 3},
{"matrix": [3, 5], "x": 5, "y": 3},
{"matrix": [3, 6], "x": 6, "y": 3},
{"matrix": [3, 7], "x": 7, "y": 3}
]
}
}
}
23 changes: 23 additions & 0 deletions keyboards/handwired/scottokeebs/scotto36/keymaps/default/config.h
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,23 @@
/*
Copyright 2022 Joe Scotto
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/

#pragma once

// Define options
#define TAPPING_TERM 135
#define PERMISSIVE_HOLD
#define TAPPING_TERM_PER_KEY
45 changes: 45 additions & 0 deletions keyboards/handwired/scottokeebs/scotto36/keymaps/default/keymap.c
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,45 @@
/*
Copyright 2022 Joe Scotto
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/

#include QMK_KEYBOARD_H

const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT_split_3x5_3(
KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,
KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_BSPC,
LSFT_T(KC_Z), KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, RSFT_T(KC_SLSH),
KC_LCTL, KC_LALT, LGUI_T(KC_SPC), LT(1, KC_TAB), LT(2, KC_ENT), KC_ESC
),
[1] = LAYOUT_split_3x5_3(
KC_UNDS, KC_MINS, KC_PLUS, KC_EQL, KC_COLN, KC_GRV, KC_MRWD, KC_MPLY, KC_MFFD, KC_DEL,
KC_LCBR, KC_LPRN, KC_RPRN, KC_RCBR, KC_PIPE, KC_ESC, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT,
LSFT_T(KC_LBRC), KC_QUOT, KC_DQUO, KC_RBRC, KC_SCLN, KC_TILDE, KC_VOLD, KC_MUTE, KC_VOLU, RSFT_T(KC_BSLS),
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
),
[2] = LAYOUT_split_3x5_3(
KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_CAPS, KC_BSPC,
KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,
KC_LSFT, KC_NO, KC_NO, KC_NO, MO(3), KC_NO, KC_NO, KC_COMM, KC_DOT, RSFT_T(KC_SLSH),
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
),
[3] = LAYOUT_split_3x5_3(
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10,
KC_F11, KC_NO, KC_NO, QK_BOOT, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_F12,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
)
};
23 changes: 23 additions & 0 deletions keyboards/handwired/scottokeebs/scotto36/keymaps/scotto/config.h
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,23 @@
/*
Copyright 2022 Joe Scotto
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/

#pragma once

// Define options
#define TAPPING_TERM 135
#define PERMISSIVE_HOLD
#define TAPPING_TERM_PER_KEY
Loading

0 comments on commit 97014f0

Please sign in to comment.