Add Adelais PCB. Adelais RGB rev.3, Adelais rev. 4 APM32F103, Adelais AVR rev. 1

keyboards/mechlovin/adelais/adelais.h

@@ -18,32 +18,18 @@
 
 #include "quantum.h"
 
-#define LAYOUT_alice_split_bs( \
-    K1E, K00, K01, K02, K03, K04, K05, K06,         K07,K08,K09, K0A, K0B, K0C, K0D, K0E,\
-    K2E, K10, K11, K12, K13, K14, K15,              K16,K17,K18, K19, K1A, K1B, K1C, K1D,\
-    K3E, K20, K21, K22, K23, K24, K25,              K26,K27,K28, K29, K2A, K2B, K2D,\
-         K30,      K32, K33, K34, K35, K36,         K37,K38,K39, K3A, K3B, K3D, K3C, K4D,\
-         K40,      K42,      K44,      K46,             K48,     K4A,               K4E \
-) { \
-    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E   }, \
-    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   K1E   }, \
-    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   KC_NO, K2D,   K2E   }, \
-    { K30,   KC_NO, K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E   }, \
-    { K40,   KC_NO, K42,   KC_NO, K44,   KC_NO, K46,   KC_NO, K48,   KC_NO, K4A,   KC_NO, KC_NO, K4D,   K4E   }, \
-}
-
-#define LAYOUT_alice( \
-    K1E, K00, K01, K02, K03, K04, K05, K06,         K07,K08,K09, K0A, K0B, K0C, K0D, \
-    K2E, K10, K11, K12, K13, K14, K15,              K16,K17,K18, K19, K1A, K1B, K1C, K1D,\
-    K3E, K20, K21, K22, K23, K24, K25,              K26,K27,K28, K29, K2A, K2B, K2D,\
-         K30,      K32, K33, K34, K35, K36,         K37,K38,K39, K3A, K3B, K3D, K3C, K4D,\
-         K40,      K42,      K44,      K46,             K48,     K4A,               K4E \
-) { \
-    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   KC_NO }, \
-    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   K1E   }, \
-    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   KC_NO, K2D,   K2E   }, \
-    { K30,   KC_NO, K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E   }, \
-    { K40,   KC_NO, K42,   KC_NO, K44,   KC_NO, K46,   KC_NO, K48,   KC_NO, K4A,   KC_NO, KC_NO, K4D,   K4E   }, \
-}
-
-#define LAYOUT_all LAYOUT_alice_split_bs
+#ifdef KEYBOARD_mechlovin_adelais_rgb_led_rev1
+    #include "rev1.h"
+#elif KEYBOARD_mechlovin_adelais_rgb_led_rev2
+    #include "rev2.h"
+#elif KEYBOARD_mechlovin_adelais_rgb_led_rev3
+    #include "rev3.h"
+#elif KEYBOARD_mechlovin_adelais_standard_led_arm_rev2
+    #include "rev2.h"
+#elif KEYBOARD_mechlovin_adelais_standard_led__armrev3
+    #include "rev3.h"
+#elif KEYBOARD_mechlovin_adelais_standard_led_arm_rev4
+    #include "rev4.h"
+#elif KEYBOARD_mechlovin_adelais_standard_led_avr_rev1
+    #include "rev1.h"
+#endif

keyboards/mechlovin/adelais/config.h

@@ -26,11 +26,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* key matrix size */
 #define MATRIX_ROWS 5
-#define MATRIX_COLS 15
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-#define LED_NUM_LOCK_PIN C15
-#define LED_CAPS_LOCK_PIN B2
-#define LED_SCROLL_LOCK_PIN B9
+#define MATRIX_COLS 15

keyboards/mechlovin/adelais/rgb_led/config.h

@@ -0,0 +1,21 @@
+/*
+Copyright 2020 Team Mechlovin'
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW

keyboards/mechlovin/adelais/rgb_led/rev1/config.h

@@ -13,7 +13,12 @@
 #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
+#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 220 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set
+
+
+#define LED_NUM_LOCK_PIN C15
+#define LED_CAPS_LOCK_PIN B2
+#define LED_SCROLL_LOCK_PIN B9

keyboards/mechlovin/adelais/rgb_led/rev1/rev1.h

@@ -17,3 +17,33 @@
 #pragma once
 
 #include "quantum.h"
+
+#define LAYOUT_alice_split_bs( \
+    K1E, K00, K01, K02, K03, K04, K05, K06,         K07,K08,K09, K0A, K0B, K0C, K0D, K0E,\
+    K2E, K10, K11, K12, K13, K14, K15,              K16,K17,K18, K19, K1A, K1B, K1C, K1D,\
+    K3E, K20, K21, K22, K23, K24, K25,              K26,K27,K28, K29, K2A, K2B, K2D,\
+         K30,      K32, K33, K34, K35, K36,         K37,K38,K39, K3A, K3B, K3D, K3C, K4D,\
+         K40,      K42,      K44,      K46,             K48,     K4A,               K4E \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E   }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   K1E   }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   KC_NO, K2D,   K2E   }, \
+    { K30,   KC_NO, K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E   }, \
+    { K40,   KC_NO, K42,   KC_NO, K44,   KC_NO, K46,   KC_NO, K48,   KC_NO, K4A,   KC_NO, KC_NO, K4D,   K4E   }, \
+}
+
+#define LAYOUT_alice( \
+    K1E, K00, K01, K02, K03, K04, K05, K06,         K07,K08,K09, K0A, K0B, K0C, K0D, \
+    K2E, K10, K11, K12, K13, K14, K15,              K16,K17,K18, K19, K1A, K1B, K1C, K1D,\
+    K3E, K20, K21, K22, K23, K24, K25,              K26,K27,K28, K29, K2A, K2B, K2D,\
+         K30,      K32, K33, K34, K35, K36,         K37,K38,K39, K3A, K3B, K3D, K3C, K4D,\
+         K40,      K42,      K44,      K46,             K48,     K4A,               K4E \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   KC_NO }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   K1E   }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   KC_NO, K2D,   K2E   }, \
+    { K30,   KC_NO, K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E   }, \
+    { K40,   KC_NO, K42,   KC_NO, K44,   KC_NO, K46,   KC_NO, K48,   KC_NO, K4A,   KC_NO, KC_NO, K4D,   K4E   }, \
+}
+
+#define LAYOUT_all LAYOUT_alice_split_bs

keyboards/mechlovin/adelais/rgb_led/rev2/config.h

@@ -1,7 +1,7 @@
 #pragma once
 
 #define PRODUCT_ID   0xAEC2
-#define PRODUCT      Adelais En Ciel Rev2
+#define PRODUCT      Adelais En Ciel Rev2  
 
 #define MATRIX_ROW_PINS { B1, A0, C13, A1, A2}
 #define MATRIX_COL_PINS { A10, A9, A8, B15, B14, B13, B12, B11, B10, B8, B4, B5, B3, C14, A7 }
@@ -31,7 +31,7 @@
 #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
+#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set
@@ -43,3 +43,8 @@
 #define ENCODER_RESOLUTION 4
 
 #define TAP_CODE_DELAY 10
+
+
+#define LED_NUM_LOCK_PIN C15
+#define LED_CAPS_LOCK_PIN B2
+#define LED_SCROLL_LOCK_PIN B9

keyboards/mechlovin/adelais/rgb_led/rev2/rev2.h

@@ -17,3 +17,33 @@
 #pragma once
 
 #include "quantum.h"
+
+#define LAYOUT_alice_split_bs( \
+    K1E, K00, K01, K02, K03, K04, K05, K06,         K07,K08,K09, K0A, K0B, K0C, K0D, K0E,\
+    K2E, K10, K11, K12, K13, K14, K15,              K16,K17,K18, K19, K1A, K1B, K1C, K1D,\
+    K3E, K20, K21, K22, K23, K24, K25,              K26,K27,K28, K29, K2A, K2B, K2D,\
+         K30,      K32, K33, K34, K35, K36,         K37,K38,K39, K3A, K3B, K3D, K3C, K4D,\
+         K40,      K42,      K44,      K46,             K48,     K4A,               K4E \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E   }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   K1E   }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   KC_NO, K2D,   K2E   }, \
+    { K30,   KC_NO, K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E   }, \
+    { K40,   KC_NO, K42,   KC_NO, K44,   KC_NO, K46,   KC_NO, K48,   KC_NO, K4A,   KC_NO, KC_NO, K4D,   K4E   }, \
+}
+
+#define LAYOUT_alice( \
+    K1E, K00, K01, K02, K03, K04, K05, K06,         K07,K08,K09, K0A, K0B, K0C, K0D, \
+    K2E, K10, K11, K12, K13, K14, K15,              K16,K17,K18, K19, K1A, K1B, K1C, K1D,\
+    K3E, K20, K21, K22, K23, K24, K25,              K26,K27,K28, K29, K2A, K2B, K2D,\
+         K30,      K32, K33, K34, K35, K36,         K37,K38,K39, K3A, K3B, K3D, K3C, K4D,\
+         K40,      K42,      K44,      K46,             K48,     K4A,               K4E \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   KC_NO }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   K1E   }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   KC_NO, K2D,   K2E   }, \
+    { K30,   KC_NO, K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E   }, \
+    { K40,   KC_NO, K42,   KC_NO, K44,   KC_NO, K46,   KC_NO, K48,   KC_NO, K4A,   KC_NO, KC_NO, K4D,   K4E   }, \
+}
+
+#define LAYOUT_all LAYOUT_alice_split_bs

keyboards/mechlovin/adelais/rgb_led/rev3/config.h

@@ -0,0 +1,77 @@
+/*
+Copyright 2021 Mechlovin' Studio
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define PRODUCT_ID   0xAEC3
+#define PRODUCT      Adelais En Ciel Rev3
+
+#define MATRIX_ROW_PINS { A4, A3, C13, A1, A2}
+#define MATRIX_COL_PINS { B10, B11, B2, B1, B0, A6, A5, A14, A13, A15, B3, B4, B5, B8, B9 }
+
+#define RGB_DI_PIN A7
+#define WS2812_SPI SPID1 // default: SPID1
+#define WS2812_SPI_MOSI_PAL_MODE 5 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5
+#define RGBLED_NUM      23
+#define RGBLIGHT_EFFECT_BREATHING
+#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#define RGBLIGHT_EFFECT_SNAKE
+#define RGBLIGHT_EFFECT_KNIGHT
+#define RGBLIGHT_EFFECT_CHRISTMAS
+#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#define RGBLIGHT_EFFECT_RGB_TEST
+#define RGBLIGHT_EFFECT_ALTERNATING
+#define RGBLIGHT_EFFECT_TWINKLE
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+
+//rgb matrix setting
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 0b1110100 AD <-> GND
+// 0b1110111 AD <-> VCC
+// 0b1110101 AD <-> SCL
+// 0b1110110 AD <-> SDA
+#define DRIVER_ADDR_1 0b0110010
+#define DRIVER_ADDR_2 0b0110010
+#define DRIVER_COUNT 1
+#define DRIVER_1_LED_TOTAL 66
+#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL
+#define RGB_MATRIX_KEYPRESSES // reacts to keypresses
+#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
+#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
+#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
+#define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
+#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
+#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set
+
+#define RGB_MATRIX_DISABLE_KEYCODES
+
+#define ENCODERS_PAD_A { B12 }
+#define ENCODERS_PAD_B { B13 }
+#define ENCODER_RESOLUTION 4
+
+#define TAP_CODE_DELAY 10
+
+
+#define LED_NUM_LOCK_PIN A0
+#define LED_CAPS_LOCK_PIN C14
+#define LED_SCROLL_LOCK_PIN C15

keyboards/mechlovin/adelais/standard_led/halconf.h → keyboards/mechlovin/adelais/rgb_led/rev3/halconf.h

@@ -14,7 +14,6 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-
 #pragma once
 
 #define HAL_USE_I2C TRUE

keyboards/mechlovin/adelais/standard_led/mcuconf.h → keyboards/mechlovin/adelais/rgb_led/rev3/mcuconf.h

@@ -14,7 +14,6 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-
 #pragma once
 
 #include_next <mcuconf.h>