Jonavin murphpad keymap update

keyboards/mechwild/murphpad/keymaps/jonavin/config.h

@@ -21,3 +21,6 @@
 
 // Increase layers to 6 for VIA
 #define DYNAMIC_KEYMAP_LAYER_COUNT 6
+
+// Remove line below for vertical layout
+#define LANDSCAPE_MODE

keyboards/mechwild/murphpad/keymaps/jonavin/keymap.c

@@ -18,7 +18,6 @@
 #include "jonavin.h"
 #include "layout_landscape.h"
 
-#define LANDSCAPE_MODE
 
 // Defines names for use in layer keycodes and the keymap
 enum layer_names {
@@ -28,6 +27,7 @@ enum layer_names {
     _RGB
 };
 
+#ifdef LANDSCAPE_MODE
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
     [_BASE] = LAYOUT_landscape(
@@ -53,7 +53,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	[_FN2] = LAYOUT_landscape(
         _______,  _______, RESET,
 
-        _______,  _______,  _______,  _______, _______,     _______,
+        _______,  _______,  KC_MPLY,  KC_MPRV, KC_MNXT,     _______,
         _______,  _______,  _______,  _______, _______,     _______,
         _______,  _______,  _______,  _______, _______,     _______,
         _______,  _______,  _______,  _______, _______,     _______,
@@ -91,6 +91,73 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                   _______,  _______, _______
    ),
 };
+#endif // LANDSCAPE_MODE
+
+#ifndef LANDSCAPE_MODE
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Base */
+    [_BASE] = LAYOUT(
+                  TT(_FN2),TT(_FN3),TT(_FN4),LT(_RGB,KC_PSCR),
+				  KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+                  KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+        KC_MUTE,  KC_P4,   KC_P5,   KC_P6,   _______,
+        TT(_FN1), KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+        KC_RALT,  KC_P0,   _______, KC_PDOT, _______,
+
+				          TT(_FN3), TT(_FN4), TT(_RGB)
+    ),
+    [_FN1] = LAYOUT(
+                  _______, _______, _______, RESET,
+                  KC_CALC, _______, _______, _______,
+                  _______, _______, _______, _______,
+        ENCFUNC,  KC_TAB,  _______, _______, _______,
+        _______,  _______, _______, _______, _______,
+        _______,  KC_BSPC, _______, KC_DEL,  _______,
+
+                  _______, _______, _______
+    ),
+    [_FN2] = LAYOUT(
+                  _______, _______, _______, _______,
+                  _______, _______, KC_MPLY, KC_MPRV,
+                  _______, _______, _______, KC_MNXT,
+        RESET,    _______, _______, _______, _______,
+        _______,  _______, _______, _______, _______,
+        _______,  _______, _______, _______, _______,
+
+                  _______, _______, _______
+    ),
+	  [_FN3] = LAYOUT(
+                  _______, _______, _______, _______,
+                  _______, _______, _______, _______,
+                  _______, _______, _______, _______,
+        _______,  _______, _______, _______, _______,
+        _______,  _______, _______, _______, _______,
+        _______,  _______, _______, _______, _______,
+
+                  _______, _______, _______
+    ),
+	[_FN4] = LAYOUT(
+                  _______, _______, _______, _______,
+                  _______, _______, _______, _______,
+                  _______, _______, _______, _______,
+        _______,  _______, _______, _______, _______,
+        _______,  _______, _______, _______, _______,
+        _______,  _______, _______, _______, _______,
+
+                  _______, _______, _______
+    ),
+    [_RGB] = LAYOUT(
+                 _______,  _______, _______, _______,
+                 _______,  _______, _______, _______,
+                 RGB_HUD,  RGB_SPI, RGB_HUI, _______,
+        _______, RGB_RMOD, RGB_TOG, RGB_MOD, _______,
+        _______, RGB_VAD,  RGB_SPD, RGB_VAI, _______,
+        _______, RGB_SAD,  _______, RGB_SAI, _______,
+
+                 _______,  _______, _______
+    ),
+};
+#endif // !LANDSCAPE_MODE
 
 typedef struct {
      char keydesc[6];    // this will be displayed on OLED
@@ -99,15 +166,15 @@ typedef struct {
 
 static const keycodedescType PROGMEM keyselection[] = {
     // list of key codes that will be scrolled through by encoder and description
-        {"TASK",    KC_TASK},
-        {"INS",     KC_INS},
-        {"DEL",     KC_DEL},
-        {"PrtSc",   KC_PSCR},
+        {"TASK ",   KC_TASK},
+        {"PREV ",   KC_MEDIA_PREV_TRACK},
+        {"NEXT ",   KC_MEDIA_NEXT_TRACK},
+        {"PLAY ",   KC_MEDIA_PLAY_PAUSE},
+        {"PrtScm",  KC_PSCR},
         {"ScrLk",   KC_SCLN},
         {"Break",   KC_PAUS},
         {"C-A-D",   KC_CAD},  // Ctrl-Alt-Del
         {"AltF4",   KC_AF4},
-        {"PLAY",    KC_MEDIA_PLAY_PAUSE},
         {"RESET",   RESET},   // firmware flash mode
 };
 
@@ -168,7 +235,7 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
         #endif
         uint8_t mods_state = get_mods();
         switch (index) {
-            case 0:         // This is the only encoder right now, keeping for consistency
+        case 0:   // main primary encoder
             switch(get_highest_layer(layer_state)){  // special handling per layer
             case _FN1:  // on Fn layer select what the encoder does when pressed
                 if (!mods_state) {
@@ -177,6 +244,11 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
                 } else {
                         // continue to default
                 }
+            case _RGB:
+                if (!mods_state) {
+                    encoder_action_rgb_hue(clockwise);
+                    break;
+                }
             default:   // all other layers
                 if (mods_state & MOD_BIT(KC_RSFT) ) { // If you are holding R shift, encoder changes layers
                     encoder_action_layerchange(clockwise);
@@ -190,6 +262,17 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
                 break;
             }
             break;
+        case 1:      // optional secondary encoder
+            switch(get_highest_layer(layer_state)){  // special handling per layer
+            case _RGB:
+                if (!mods_state) {
+                    encoder_action_rgb_mode(clockwise);
+                    break;
+                }
+            default:   // all other layers
+                encoder_action_mediatrack(clockwise);   // Otherwise prev/next track
+                break;
+            }
         }
         return true;
     }
@@ -287,16 +370,19 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
 
     void oled_task_user(void) {
 		render_logo();
-		oled_set_cursor(0,6);
+		oled_set_cursor(0,5);
 
-		oled_write_ln_P(PSTR("Layer"), false);
+		oled_write_ln_P(PSTR("-JV-"), false);
+		oled_write_ln_P(PSTR(" "), false);
 
+        bool showSelectedKey = false;
         switch (get_highest_layer(layer_state)) {
             case _BASE:
-                oled_write_ln_P(PSTR("Base"), false);
+                oled_write_ln_P(PSTR("BASE"), false);
                 break;
             case _FN1:
                 oled_write_ln_P(PSTR("FN 1"), false);
+                showSelectedKey = true;
                 break;
             case _FN2:
                 oled_write_ln_P(PSTR("FN 2"), false);
@@ -311,18 +397,26 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
                 oled_write_ln_P(PSTR("RGB "), false);
                 break;
             default:
-                oled_write_ln_P(PSTR("Undef"), false);
+                oled_write_ln_P(PSTR(" ?? "), false);
         }
-        oled_write_ln_P(PSTR(""), false);
+        if (showSelectedKey) oled_write_ln(selectedkey_rec.keydesc, false);
+            else oled_write_ln_P(PSTR("     "), false);
+
         // Host Keyboard LED Status
         led_t led_state = host_keyboard_led_state();
-        oled_write_ln_P(led_state.num_lock ? PSTR("NUM ") : PSTR("    "), false);
-        oled_write_ln_P(led_state.caps_lock ? PSTR("CAP ") : PSTR("    "), false);
-        oled_write_ln_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR("    "), false);
+        oled_set_cursor(0,11);
+        oled_write_ln_P(led_state.num_lock ? PSTR(" NUM") : PSTR("    "), false);
+        oled_write_ln_P(led_state.caps_lock ? PSTR(" CAP") : PSTR("    "), false);
+        oled_write_ln_P(led_state.scroll_lock ? PSTR(" SCR") : PSTR("    "), false);
     }
     #endif // !LANDSCAPE_MODE
 
     void suspend_power_down_user(void) {  // shutdown oled when powered down to prevent OLED from showing Mercutio all the time
-      oled_off();
+        oled_off();
+        rgblight_disable_noeeprom();
+    }
+
+    void suspend_wakeup_init_user(void) {
+        rgblight_enable_noeeprom();
     }
 #endif

keyboards/mechwild/murphpad/keymaps/jonavin/readme.md

@@ -8,12 +8,12 @@ This allows you to use Murphpad in a horizontal/landscape orientation with extra
         [_BASE] = LAYOUT_landscape(
             TT(_FN1), TT(_FN2), KC_MUTE,
 
-        KC_NLCK,  KC_PSLS,  KC_PAST, KC_PMNS, KC_PPLS,      KC_BSPC,
-        KC_TAB,   KC_P7,    KC_P8,   KC_P9,   KC_PDOT,      KC_RGUI,
-        KC_RSFT,  KC_P4,    KC_P5,   KC_P6,   KC_COMMA,     KC_RCTL,
-        KC_P0,    KC_P1,    KC_P2,   KC_P3,   KC_PENT,      KC_RALT,
+            KC_NLCK,  KC_PSLS,  KC_PAST, KC_PMNS, KC_PPLS,      KC_BSPC,
+            KC_TAB,   KC_P7,    KC_P8,   KC_P9,   KC_PDOT,      KC_RGUI,
+            KC_RSFT,  KC_P4,    KC_P5,   KC_P6,   KC_COMMA,     KC_RCTL,
+            KC_P0,    KC_P1,    KC_P2,   KC_P3,   KC_PENT,      KC_RALT,
 
-                    _______, _______, _______
+                        _______, _______, _______
         ),
 
 NOTE:  VIA is enabled, but it will show it in the normal orientation until I build a landscape layout version
@@ -25,16 +25,16 @@ Special Features
 
         static const keycodedescType PROGMEM keyselection[] = {
             // list of key codes that will be scrollled through by encoder and description
-                {"TASK",    KC_TASK},
-                {"INS",     KC_INS},
-                {"DEL",     KC_DEL},
-                {"PrtSc",   KC_PSCR},
-                {"ScrLk",   KC_SCLN},
-                {"Break",   KC_PAUS},
-                {"C-A-D",   KC_CAD},  // Ctrl-Alt-Del
-                {"AltF4",   KC_AF4},
-                {"PLAY",    KC_MEDIA_PLAY_PAUSE},
-                {"RESET",   RESET},  // firmware flash mode
+            {"TASK ",   KC_TASK},
+            {"PREV ",   KC_MEDIA_PREV_TRACK},
+            {"NEXT ",   KC_MEDIA_NEXT_TRACK},
+            {"PLAY ",   KC_MEDIA_PLAY_PAUSE},
+            {"PrtScm",  KC_PSCR},
+            {"ScrLk",   KC_SCLN},
+            {"Break",   KC_PAUS},
+            {"C-A-D",   KC_CAD},  // Ctrl-Alt-Del
+            {"AltF4",   KC_AF4},
+            {"RESET",   RESET},   // firmware flash mode
           };
 
   - Additional encoder functionality
@@ -49,7 +49,7 @@ rules.mk OPTIONS - Active features from userspace
     - STARTUP_NUMLOCK_ON = yes
         - turns on NUMLOCK by default
 
-DEFAULT MAPPING
+DEFAULT LANDSCAPE MAPPING 
 
 ![image](https://user-images.githubusercontent.com/71780717/131718965-b20afef6-3bc5-49e4-952f-5755a9d6d539.png)
 
@@ -59,7 +59,18 @@ FN1 Layer 1
 ![image](https://user-images.githubusercontent.com/71780717/131719025-d41cbcd9-80b1-4a0a-abb5-55d878752dc6.png)
 
 
+FN2 Layer 2
+
+![image](https://user-images.githubusercontent.com/71780717/132967003-63268514-2ac3-4069-bca1-6d92992ca403.png)
+
+
 RGB Layer 5 - Use Shift+Encoder to get to RGB layer 5
 
 ![image](https://user-images.githubusercontent.com/71780717/131719492-e2d05a75-3a7a-48ca-94a3-faa3ff891914.png)
 
+--------------
+
+NORMAL / TRADITIONAL NON-LANDSCAPE NUMPAD LAYOUT
+
+![image](https://user-images.githubusercontent.com/71780717/132966975-3b463fb4-059f-42c5-b8b3-a3d35f4a0d6b.png)
+

users/jonavin/jonavin.c

@@ -160,6 +160,70 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
             }
         }
     }
+
+    #ifdef RGB_MATRIX_ENABLE
+        void encoder_action_rgb_speed(bool clockwise) {
+            if (clockwise)
+                rgb_matrix_increase_speed_noeeprom();
+            else
+                rgb_matrix_decrease_speed_noeeprom();
+        }
+        void encoder_action_rgb_hue(bool clockwise) {
+            if (clockwise)
+                rgb_matrix_increase_hue_noeeprom();
+            else
+                rgb_matrix_decrease_hue_noeeprom();
+        }
+        void encoder_action_rgb_saturation(bool clockwise) {
+            if (clockwise)
+                rgb_matrix_increase_sat_noeeprom();
+            else
+                rgb_matrix_decrease_sat_noeeprom();
+        }
+        void encoder_action_rgb_brightness(bool clockwise) {
+            if (clockwise)
+                rgb_matrix_increase_val_noeeprom();
+            else
+                rgb_matrix_decrease_val_noeeprom();
+        }
+        void encoder_action_rgb_mode(bool clockwise) {
+            if (clockwise)
+                rgb_matrix_step_noeeprom();
+            else
+                rgb_matrix_step_reverse_noeeprom();
+        }
+    #elif defined(RGBLIGHT_ENABLE)
+        void encoder_action_rgb_speed(bool clockwise) {
+            if (clockwise)
+                rgblight_increase_speed_noeeprom();
+            else
+                rgblight_decrease_speed_noeeprom();
+        }
+        void encoder_action_rgb_hue(bool clockwise) {
+            if (clockwise)
+                rgblight_increase_hue_noeeprom();
+            else
+                rgblight_decrease_hue_noeeprom();
+        }
+        void encoder_action_rgb_saturation(bool clockwise) {
+            if (clockwise)
+                rgblight_increase_sat_noeeprom();
+            else
+                rgblight_decrease_sat_noeeprom();
+        }
+        void encoder_action_rgb_brightness(bool clockwise) {
+            if (clockwise)
+                rgblight_increase_val_noeeprom();
+            else
+                rgblight_decrease_val_noeeprom();
+        }
+        void encoder_action_rgb_mode(bool clockwise) {
+            if (clockwise)
+                rgblight_step_noeeprom();
+            else
+                rgblight_step_reverse_noeeprom();
+        }
+    #endif // RGB_MATRIX_ENABLE || RGBLIGHT_ENABLE
 #endif // ENCODER_ENABLE
 
 #if defined(ENCODER_ENABLE) && defined(ENCODER_DEFAULTACTIONS_ENABLE)       // Encoder Functionality

users/jonavin/jonavin.h

@@ -36,7 +36,9 @@ enum custom_user_keycodes {
   KC_WINLCK,    //Toggles Win key on and off
   RGB_TOI,      // Timeout idle time up
   RGB_TOD,      // Timeout idle time down
-  RGB_NITE      // Turns off all rgb but allow rgb indicators to work
+  RGB_NITE,     // Turns off all rgb but allow rgb indicators to work
+
+  NEW_SAFE_RANGE  // new safe range for keymap level custom keycodes
 };
 
 #define KC_CAD	LALT(LCTL(KC_DEL))
@@ -67,6 +69,14 @@ enum custom_user_keycodes {
 
     uint8_t get_selected_layer(void);
     void encoder_action_layerchange(bool clockwise);
+
+    #if defined(RGB_MATRIX_ENABLE) || defined(RGBLIGHT_ENABLE)
+        void encoder_action_rgb_speed(bool clockwise);
+        void encoder_action_rgb_hue(bool clockwise);
+        void encoder_action_rgb_saturation(bool clockwise);
+        void encoder_action_rgb_brightness(bool clockwise);
+        void encoder_action_rgb_mode(bool clockwise);
+    #endif // RGB_MATRIX_ENABLE / RGBLIGHT_ENABLE
 #endif // ENCODER_ENABLE