Bastard Keyboards: upstream recent changes

keyboards/bastardkb/charybdis/3x5/blackpill/config.h

@@ -58,5 +58,5 @@
 #define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4
 
 /* PMW3360 settings. */
-#define PMW33XX_CS_PIN B14
+#define POINTING_DEVICE_CS_PIN B14
 #define PMW33XX_CS_DIVISOR 64

keyboards/bastardkb/charybdis/3x5/blackpill/halconf.h

@@ -1,4 +1,4 @@
-/*
+/**
  * Copyright 2020 Nick Brassel (tzarc)
  * Copyright 2021 Charly Delay <charly@codesink.dev> (@0xcharly)
  *
@@ -20,10 +20,8 @@
 
 #define HAL_USE_PWM TRUE
 #define HAL_USE_SERIAL TRUE
-//#define HAL_USE_I2C TRUE
 #define HAL_USE_SPI TRUE
 #define SPI_USE_WAIT TRUE
 #define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
-//#define HAL_USE_GPT TRUE
 
 #include_next "halconf.h"

keyboards/bastardkb/charybdis/3x5/blackpill/mcuconf.h

@@ -21,14 +21,6 @@
 
 #include_next "mcuconf.h"
 
-#undef STM32_I2C_USE_I2C1
-#define STM32_I2C_USE_I2C1 TRUE
-
-#undef STM32_I2C_I2C1_RX_DMA_STREAM
-#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
-#undef STM32_I2C_I2C1_TX_DMA_STREAM
-#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
-
 #undef STM32_PWM_USE_TIM2
 #define STM32_PWM_USE_TIM2 TRUE
 
@@ -46,14 +38,6 @@
 #undef STM32_SERIAL_USE_USART1
 #define STM32_SERIAL_USE_USART1 TRUE
 
-// #undef STM32_SERIAL_USE_USART2
-// #define STM32_SERIAL_USE_USART2 TRUE
-
-// #undef STM32_UART_USART2_RX_DMA_STREAM
-// #define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
-// #undef STM32_UART_USART2_TX_DMA_STREAM
-// #define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
-
 #undef STM32_GPT_USE_TIM4
 #define STM32_GPT_USE_TIM4 TRUE
 

keyboards/bastardkb/charybdis/3x5/blackpill/rules.mk

@@ -24,10 +24,8 @@ RGBLIGHT_SUPPORTED = yes    # RGB underglow is supported, but not enabled by def
 RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 RGB_MATRIX_DRIVER = WS2812
 
-# Charybdis nano is a split 3x5 keyboard with a maximum of 3 thumb keys (2 on
-# the trackball side).
 SPLIT_KEYBOARD = yes
-LAYOUTS = split_3x5_3 # Support community layout, in particular Manna-Harbour's Miryoku layout
+LAYOUTS = split_3x5_3
 
 POINTING_DEVICE_ENABLE = yes # Enable trackball
 POINTING_DEVICE_DRIVER = pmw3360

keyboards/bastardkb/charybdis/3x5/keymaps/default/keymap.c

@@ -14,6 +14,7 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
+
 #include QMK_KEYBOARD_H
 
 enum charybdis_keymap_layers {

keyboards/bastardkb/charybdis/3x5/v1/elitec/config.h

@@ -39,4 +39,4 @@
 #define RGB_DI_PIN D3
 
 /* PMW3360 settings. */
-#define PMW33XX_CS_PIN B0
+#define POINTING_DEVICE_CS_PIN B0

keyboards/bastardkb/charybdis/3x5/v2/elitec/config.h

@@ -33,4 +33,4 @@
 #define RGB_DI_PIN D3
 
 /* PMW3360 settings. */
-#define PMW33XX_CS_PIN F0
+#define POINTING_DEVICE_CS_PIN F0

keyboards/bastardkb/charybdis/3x5/v2/splinky/config.h

@@ -20,8 +20,6 @@
 /* Key matrix configuration. */
 #define MATRIX_ROW_PINS \
     { GP26, GP5, GP4, GP9 }
-#define MATRIX_COL_PINS \
-    { GP28, GP15, GP6, GP7, GP8 }
 
 /* Handedness. */
 #define MASTER_RIGHT
@@ -39,12 +37,74 @@
 
 /* SPI & PMW3360 settings. */
 #define SPI_DRIVER SPID0
-#define SPI_SCK_PIN GP18
-#define SPI_MOSI_PIN GP19
 #define SPI_MISO_PIN GP20
-#define PMW33XX_CS_PIN GP14
 
 /* Reset. */
 #define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
 #define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17
 #define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U
+
+/** RGB Matrix. */
+
+#ifdef RGB_MATRIX_ENABLE
+// Enable all animations on ARM boards since they have plenty of memory
+// available for it.
+#    define ENABLE_RGB_MATRIX_ALPHAS_MODS
+#    define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#    define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+#    define ENABLE_RGB_MATRIX_BREATHING
+#    define ENABLE_RGB_MATRIX_BAND_SAT
+#    define ENABLE_RGB_MATRIX_BAND_VAL
+#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+#    define ENABLE_RGB_MATRIX_CYCLE_ALL
+#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#    define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#    define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
+#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+#    define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
+#    define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
+#    define ENABLE_RGB_MATRIX_DUAL_BEACON
+#    define ENABLE_RGB_MATRIX_RAINBOW_BEACON
+#    define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+#    define ENABLE_RGB_MATRIX_RAINDROPS
+#    define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+#    define ENABLE_RGB_MATRIX_HUE_BREATHING
+#    define ENABLE_RGB_MATRIX_HUE_PENDULUM
+#    define ENABLE_RGB_MATRIX_HUE_WAVE
+#    define ENABLE_RGB_MATRIX_TYPING_HEATMAP
+#    define ENABLE_RGB_MATRIX_DIGITAL_RAIN
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+#    define ENABLE_RGB_MATRIX_SPLASH
+#    define ENABLE_RGB_MATRIX_MULTISPLASH
+#    define ENABLE_RGB_MATRIX_SOLID_SPLASH
+#    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
+
+// Limit maximum brightness to keep power consumption reasonable, and avoid
+// disconnects.
+#    undef RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 64
+
+// Rainbow swirl as startup mode.
+#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
+
+// Slow swirl at startup.
+#    define RGB_MATRIX_STARTUP_SPD 32
+
+// Startup values.
+#    define RGB_MATRIX_STARTUP_HUE 0
+#    define RGB_MATRIX_STARTUP_SAT 255
+#    define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#    define RGB_MATRIX_STARTUP_HSV RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT, RGB_MATRIX_STARTUP_VAL
+#endif // RGB_MATRIX_ENABLE

keyboards/bastardkb/charybdis/3x5/v2/splinky/readme.md

@@ -0,0 +1,6 @@
+# Splinky controller
+
+The splinky is a Pro-Micro/Elite-C replacement with USB-C and RP2040.
+
+See https://github.com/plut0nium/0xB2/#releases to figure out the right version
+for you (v2 and v3) supported.

keyboards/bastardkb/dilemma/splinky/splinky.c → keyboards/bastardkb/charybdis/3x5/v2/splinky/v2/config.h

@@ -15,19 +15,13 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "quantum.h"
+#pragma once
 
-// Forward declare RP2040 SDK declaration.
-void gpio_init(uint gpio);
+/* Key matrix configuration. */
+#define MATRIX_COL_PINS \
+    { GP28, GP15, GP6, GP7, GP8 }
 
-void keyboard_pre_init_kb(void) {
-    // Ensures that GP26 through GP29 are initialized as digital inputs (as
-    // opposed to analog inputs).  These GPIOs are shared with A0 through A3,
-    // respectively.  On RP2040-B2 and later, the digital inputs are disabled by
-    // default (see RP2040-E6).
-    gpio_init(GP26);
-    gpio_init(GP27);
-    gpio_init(GP28);
-    gpio_init(GP29);
-    keyboard_pre_init_user();
-}
+/* SPI & PMW3360 settings. */
+#define SPI_SCK_PIN GP18
+#define SPI_MOSI_PIN GP19
+#define POINTING_DEVICE_CS_PIN GP14

keyboards/bastardkb/charybdis/3x5/v2/splinky/v2/rules.mk

@@ -0,0 +1,2 @@
+# Intentionally blank so that QMK detects this folder as a valid keyboard
+# parameter.

keyboards/bastardkb/charybdis/3x5/v2/splinky/v3/config.h

@@ -0,0 +1,27 @@
+/*
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* Key matrix configuration. */
+#define MATRIX_COL_PINS \
+    { GP28, GP21, GP6, GP7, GP8 }
+
+/* SPI & PMW3360 settings. */
+#define SPI_SCK_PIN GP22
+#define SPI_MOSI_PIN GP23
+#define POINTING_DEVICE_CS_PIN GP16

keyboards/bastardkb/charybdis/3x5/v2/splinky/v3/rules.mk

@@ -0,0 +1,2 @@
+# Intentionally blank so that QMK detects this folder as a valid keyboard
+# parameter.

keyboards/bastardkb/charybdis/3x5/v2/stemcell/config.h

@@ -0,0 +1,63 @@
+/*
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* Key matrix configuration. */
+#define MATRIX_ROW_PINS \
+    { F7, C6, D4, B5 }
+#define MATRIX_COL_PINS \
+    { F5, B6, D7, E6, B4 }
+
+/* Handedness. */
+#define MASTER_RIGHT
+
+// To use the handedness pin, resistors need to be installed on the adapter PCB.
+// If so, uncomment the following code, and undefine MASTER_RIGHT above.
+// #define A0 PAL_LINE(GPIOA, 0)
+// #define SPLIT_HAND_PIN A0
+// #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.
+
+/* serial.c configuration (for split keyboard). */
+#define SOFT_SERIAL_PIN D2
+
+/* RGB settings. */
+#define RGB_DI_PIN D3
+#define WS2812_PWM_DRIVER PWMD2
+#define WS2812_PWM_CHANNEL 4
+#define WS2812_PWM_PAL_MODE 1
+#define WS2812_DMA_STREAM STM32_DMA1_STREAM7
+#define WS2812_DMA_CHANNEL 3
+
+/* CRC. */
+#define CRC8_USE_TABLE
+#define CRC8_OPTIMIZE_SPEED
+
+/* SPI config for pmw3360 sensor. */
+#define SPI_DRIVER SPID1
+#define SPI_SCK_PIN B1
+#define SPI_SCK_PAL_MODE 5
+#define SPI_MOSI_PIN B2
+#define SPI_MOSI_PAL_MODE 5
+#define SPI_MISO_PIN B3
+#define SPI_MISO_PAL_MODE 5
+
+/* PMW3360 settings. */
+#define A1 PAL_LINE(GPIOA, 1)
+#define POINTING_DEVICE_CS_PIN A1
+#define PMW3360_CS_MODE 3
+#define PMW3360_CS_DIVISOR 64

keyboards/bastardkb/charybdis/3x5/v2/stemcell/halconf.h

@@ -0,0 +1,24 @@
+/*
+ * Copyright 2021 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define HAL_USE_PWM TRUE
+#define HAL_USE_SERIAL TRUE
+#define HAL_USE_SPI TRUE
+
+#include_next <halconf.h>

keyboards/bastardkb/charybdis/3x5/v2/stemcell/info.json

@@ -0,0 +1,6 @@
+{
+    "keyboard_name": "Charybdis Nano (3x5) STeMCell",
+    "usb": {
+      "device_version": "2.0.0"
+    }
+}

keyboards/bastardkb/charybdis/3x5/v2/stemcell/mcuconf.h

@@ -0,0 +1,32 @@
+/*
+ * Copyright 2021 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef STM32_SPI_USE_SPI1
+#define STM32_SPI_USE_SPI1 TRUE
+
+#undef STM32_SERIAL_USE_USART1
+#define STM32_SERIAL_USE_USART1 FALSE
+
+#undef STM32_PWM_USE_TIM2
+#define STM32_PWM_USE_TIM2 TRUE
+
+#undef STM32_ST_USE_TIMER
+#define STM32_ST_USE_TIMER 5