new keyboard tata80

keyboards/wuque/tata80/wk/config.h

@@ -0,0 +1,57 @@
+/* Copyright 2022 wuque
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "config_common.h"
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6, F7 }
+#define MATRIX_COL_PINS { C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1, D0, B7, B3, B2, B1, B0 }
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+#define FORCE_NKRO

keyboards/wuque/tata80/wk/info.json

@@ -0,0 +1,115 @@
+{
+  "keyboard_name": "Tata80_wk",
+  "manufacturer": "wuque studio",
+  "url": "https://shop.wuquestudio.com/products/tata80-keyboard-kit",
+  "maintainer": "Koichi Katano",
+  "usb": {
+    "vid": "0x2365",
+    "pid": "0x0168",
+    "device_version": "0.0.1"
+  },
+  "processor": "atmega32u4",
+  "bootloader": "atmel-dfu",
+  "indicators": {
+    "caps_lock": "E6"
+  },
+  "layouts": {
+    "LAYOUT": {
+      "layout": [
+        { "label": "Esc", "x": 0, "y": 0 },
+        { "label": "F1", "x": 1.25, "y": 0 },
+        { "label": "F2", "x": 2.25, "y": 0 },
+        { "label": "F3", "x": 3.25, "y": 0 },
+        { "label": "F4", "x": 4.25, "y": 0 },
+        { "label": "F5", "x": 5.5, "y": 0 },
+        { "label": "F6", "x": 6.5, "y": 0 },
+        { "label": "F7", "x": 7.5, "y": 0 },
+        { "label": "F8", "x": 8.5, "y": 0 },
+        { "label": "F9", "x": 9.75, "y": 0 },
+        { "label": "F10", "x": 10.75, "y": 0 },
+        { "label": "F11", "x": 11.75, "y": 0 },
+        { "label": "F12", "x": 12.75, "y": 0 },
+        { "label": "F13", "x": 14, "y": 0 },
+        { "label": "Print", "x": 15.25, "y": 0 },
+        { "label": "Scroll", "x": 16.25, "y": 0 },
+        { "label": "Pause", "x": 17.25, "y": 0 },
+
+        { "label": "~", "x": 0, "y": 1.25 },
+        { "label": "1", "x": 1, "y": 1.25 },
+        { "label": "2", "x": 2, "y": 1.25 },
+        { "label": "3", "x": 3, "y": 1.25 },
+        { "label": "4", "x": 4, "y": 1.25 },
+        { "label": "5", "x": 5, "y": 1.25 },
+        { "label": "6", "x": 6, "y": 1.25 },
+        { "label": "7", "x": 7, "y": 1.25 },
+        { "label": "8", "x": 8, "y": 1.25 },
+        { "label": "9", "x": 9, "y": 1.25 },
+        { "label": "0", "x": 10, "y": 1.25 },
+        { "label": "-", "x": 11, "y": 1.25 },
+        { "label": "=", "x": 12, "y": 1.25 },
+        { "label": "Backspace", "x": 13, "y": 1.25, "w": 2 },
+        { "label": "Insert", "x": 15.25, "y": 1.25 },
+        { "label": "Home", "x": 16.25, "y": 1.25 },
+        { "label": "PageUp", "x": 17.25, "y": 1.25 },
+
+        { "label": "Tab", "x": 0, "y": 2.25, "w": 1.5 },
+        { "label": "Q", "x": 1.5, "y": 2.25 },
+        { "label": "W", "x": 2.5, "y": 2.25 },
+        { "label": "E", "x": 3.5, "y": 2.25 },
+        { "label": "R", "x": 4.5, "y": 2.25 },
+        { "label": "T", "x": 5.5, "y": 2.25 },
+        { "label": "Y", "x": 6.5, "y": 2.25 },
+        { "label": "U", "x": 7.5, "y": 2.25 },
+        { "label": "I", "x": 8.5, "y": 2.25 },
+        { "label": "O", "x": 9.5, "y": 2.25 },
+        { "label": "P", "x": 10.5, "y": 2.25 },
+        { "label": "[", "x": 11.5, "y": 2.25 },
+        { "label": "]", "x": 12.5, "y": 2.25 },
+        { "label": "\\", "x": 13.5, "y": 2.25, "w": 1.5 },
+        { "label": "Delete", "x": 15.25, "y": 2.25 },
+        { "label": "End", "x": 16.25, "y": 2.25 },
+        { "label": "PageDown", "x": 17.25, "y": 2.25 },
+
+        { "label": "Caps Lock", "x": 0, "y": 3.25, "w": 1.75 },
+        { "label": "A", "x": 1.75, "y": 3.25 },
+        { "label": "S", "x": 2.75, "y": 3.25 },
+        { "label": "D", "x": 3.75, "y": 3.25 },
+        { "label": "F", "x": 4.75, "y": 3.25 },
+        { "label": "G", "x": 5.75, "y": 3.25 },
+        { "label": "H", "x": 6.75, "y": 3.25 },
+        { "label": "J", "x": 7.75, "y": 3.25 },
+        { "label": "K", "x": 8.75, "y": 3.25 },
+        { "label": "L", "x": 9.75, "y": 3.25 },
+        { "label": ";", "x": 10.75, "y": 3.25 },
+        { "label": "'", "x": 11.75, "y": 3.25 },
+        { "label": "Enter", "x": 12.75, "y": 3.25, "w": 2.25 },
+
+        { "label": "Shift", "x": 0, "y": 4.25, "w": 2.25 },
+        { "label": "Z", "x": 2.25, "y": 4.25 },
+        { "label": "X", "x": 3.25, "y": 4.25 },
+        { "label": "C", "x": 4.25, "y": 4.25 },
+        { "label": "V", "x": 5.25, "y": 4.25 },
+        { "label": "B", "x": 6.25, "y": 4.25 },
+        { "label": "N", "x": 7.25, "y": 4.25 },
+        { "label": "M", "x": 8.25, "y": 4.25 },
+        { "label": ",", "x": 9.25, "y": 4.25 },
+        { "label": ".", "x": 10.25, "y": 4.25 },
+        { "label": "/", "x": 11.25, "y": 4.25 },
+        { "label": "Shift", "x": 12.25, "y": 4.25, "w": 2.75 },
+        { "label": "\u2191", "x": 16.25, "y": 4.25 },
+
+        { "label": "Ctrl", "x": 0, "y": 5.25, "w": 1.25 },
+        { "label": "Win", "x": 1.25, "y": 5.25, "w": 1.25 },
+        { "label": "Alt", "x": 2.5, "y": 5.25, "w": 1.25 },
+        { "label": "Space", "x": 3.75, "y": 5.25, "w": 6.25 },
+        { "label": "Alt", "x": 10, "y": 5.25, "w": 1.25 },
+        { "label": "Fn", "x": 11.25, "y": 5.25, "w": 1.25 },
+        { "label": "Win", "x": 12.5, "y": 5.25, "w": 1.25 },
+        { "label": "Ctrl", "x": 13.75, "y": 5.25, "w": 1.25 },
+        { "label": "\u2190", "x": 15.25, "y": 5.25 },
+        { "label": "\u2193", "x": 16.25, "y": 5.25 },
+        { "label": "\u2192", "x": 17.25, "y": 5.25 }
+      ]
+    }
+  }
+}

keyboards/wuque/tata80/wk/keymaps/default/keymap.c

@@ -0,0 +1,36 @@
+/* Copyright 2022 wuque
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_F13,  KC_PSCR, KC_SCRL, KC_PAUS,
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_INS,  KC_HOME, KC_PGUP,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,  KC_END,  KC_PGDN,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,          KC_UP,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                    KC_RALT, MO(1),   KC_APP,   KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [1] = LAYOUT(
+        _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,          _______,
+        _______, _______, _______,                            _______,                   _______, _______, _______,          _______, _______, _______, _______
+    )
+};

keyboards/wuque/tata80/wk/keymaps/via/keymap.c

@@ -0,0 +1,51 @@
+/* Copyright 2022 wuque
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+       [0] = LAYOUT(
+        KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_F13,  KC_PSCR, KC_SCRL, KC_PAUS,
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_INS,  KC_HOME, KC_PGUP,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,  KC_END,  KC_PGDN,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,          KC_UP,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                    KC_RALT, MO(1),   KC_APP,   KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [1] = LAYOUT(
+        _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,          _______,
+        _______, _______, _______,                            _______,                   _______, _______, _______,          _______, _______, _______, _______
+    ),
+    [2] = LAYOUT(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,          _______,
+        _______, _______, _______,                            _______,                   _______, _______, _______,          _______, _______, _______, _______
+    ),
+    [3] = LAYOUT(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,          _______,
+        _______, _______, _______,                            _______,                   _______, _______, _______,          _______, _______, _______, _______
+    )
+};

keyboards/wuque/tata80/wk/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/wuque/tata80/wk/readme.md

@@ -0,0 +1,19 @@
+# Tata80
+
+Support Atmega32u4 keyboard, with a specific configuration
+
+* Keyboard Maintainer:  [zoumeiguang2000](https://github.com/zoumeiguang2000)
+* Hardware Supported: Atmega32u4
+
+## Bootloader
+
+* **Physical reset button**: Short press the button on the back of the PCB to enter the Bootloader and flash the firmware
+Make example for this keyboard (after setting up your build environment):
+
+    make wuque/tata80/wk:default
+
+Flashing example for this keyboard:  
+
+    make wuque/tata80/wk:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/wuque/tata80/wk/rules.mk

@@ -0,0 +1,13 @@
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes       # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no        # Console for debug
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = no            # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+

keyboards/wuque/tata80/wk/wk.c

@@ -0,0 +1,16 @@
+/* Copyright 2022 wuque
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "wk.h"

keyboards/wuque/tata80/wk/wk.h

@@ -0,0 +1,44 @@
+/* Copyright 2022 wuque
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, k015, k016, \
+    k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114, k115, k116, \
+    k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, k214, k215, k216, \
+    k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311,       k313,                   \
+    k400,       k402, k403, k404, k405, k406, k407, k408, k409, k410, k411,       k413,       k415,       \
+    k500, k501, k502,                   k506,             k509, k510, k511,       k513, k514, k515, k516  \
+) \
+{ \
+    { k000,  k001,  k002,  k003,  k004,  k005,  k006, k007,  k008,  k009,  k010,  k011,  k012,  k013,  k014,  k015,  k016  }, \
+    { k100,  k101,  k102,  k103,  k104,  k105,  k106, k107,  k108,  k109,  k110,  k111,  k112,  k113,  k114,  k115,  k116  }, \
+    { k200,  k201,  k202,  k203,  k204,  k205,  k206, k207,  k208,  k209,  k210,  k211,  k212,  k213,  k214,  k215,  k216  }, \
+    { k300,  k301,  k302,  k303,  k304,  k305,  k306, k307,  k308,  k309,  k310,  k311,  KC_NO, k313,  KC_NO, KC_NO, KC_NO }, \
+    { k400,  KC_NO, k402,  k403,  k404,  k405,  k406, k407,  k408,  k409,  k410,  k411,  KC_NO, k413,  KC_NO, k415,  KC_NO }, \
+    { k500,  k501,  k502,  KC_NO, KC_NO, KC_NO, k506, KC_NO, KC_NO, k509,  k510,  k511,  KC_NO, k513,  k514,  k515,  k516  }  \
+}