qmk · tzarc · Mar 10, 2023 · Mar 5, 2023
diff --git a/keyboards/m10a/config.h b/keyboards/m10a/config.h
@@ -18,14 +18,6 @@
 
 #pragma once
 
-
-/* Planck PCB default pin-out */
-#define MATRIX_ROW_PINS { B6, F7, F6, D6 }
-#define MATRIX_COL_PINS { F5, F1, F0 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/m10a/info.json b/keyboards/m10a/info.json
@@ -8,6 +8,11 @@
         "pid": "0x00AA",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "F1", "F0"],
+        "rows": ["B6", "F7", "F6", "D6"]
+    },
+    "diode_direction": "ROW2COL",
     "backlight": {
         "pin": "B7",
         "levels": 6

diff --git a/keyboards/machine_industries/m4_a/config.h b/keyboards/machine_industries/m4_a/config.h
@@ -3,23 +3,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { C7, C6 }
-#define MATRIX_COL_PINS { F6, F7 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/machine_industries/m4_a/info.json b/keyboards/machine_industries/m4_a/info.json
@@ -8,6 +8,11 @@
         "pid": "0x004A",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F6", "F7"],
+        "rows": ["C7", "C6"]
+    },
+    "diode_direction": "ROW2COL",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {

diff --git a/keyboards/machkeyboards/mach3/config.h b/keyboards/machkeyboards/mach3/config.h
diff --git a/keyboards/machkeyboards/mach3/info.json b/keyboards/machkeyboards/mach3/info.json
@@ -8,6 +8,11 @@
         "pid": "0x4D33",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["E6", "B4", "B5"],
+        "rows": ["D1", "D0", "D4"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "B6",
         "levels": 5,

diff --git a/keyboards/macro1/config.h b/keyboards/macro1/config.h
@@ -16,14 +16,6 @@
 
 #pragma once
 
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { E6, B7, D0, D1, D2, B3 }
-#define MATRIX_COL_PINS { D3, D4, D6, D7 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 

diff --git a/keyboards/macro1/info.json b/keyboards/macro1/info.json
@@ -8,6 +8,11 @@
       "pid": "0x9999",
       "device_version": "0.0.1"
     },
+    "matrix_pins": {
+      "cols": ["D3", "D4", "D6", "D7"],
+      "rows": ["E6", "B7", "D0", "D1", "D2", "B3"]
+    },
+    "diode_direction": "COL2ROW",
     "encoder": {
       "rotary": [
         {"pin_a": "F0", "pin_b": "F1"}

diff --git a/keyboards/majistic/config.h b/keyboards/majistic/config.h
@@ -18,15 +18,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-#define MATRIX_ROW_PINS { F6, F7, B1, B3, B2 }
-#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5, F4, F5 }  // F4, F5 is dummy
-#define MATRIX_ROW_PINS_RIGHT { D4, C6, D7, E6, B4 }
-#define MATRIX_COL_PINS_RIGHT { B6, B2, B3, B1, F7, F6, F5, F4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/majistic/info.json b/keyboards/majistic/info.json
@@ -8,8 +8,19 @@
     	"pid": "0x6E55",
     	"device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["D4", "C6", "D7", "E6", "B4", "B5", "F4", "F5"],
+        "rows": ["F6", "F7", "B1", "B3", "B2"]
+    },
+    "diode_direction": "COL2ROW",
     "split": {
-    	"soft_serial_pin": "D2"
+    	"soft_serial_pin": "D2",
+        "matrix_pins": {
+            "right": {
+                "cols": ["B6", "B2", "B3", "B1", "F7", "F6", "F5", "F4"],
+                "rows": ["D4", "C6", "D7", "E6", "B4"]
+            }
+        },
     },
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",

diff --git a/keyboards/makrosu/config.h b/keyboards/makrosu/config.h
@@ -16,14 +16,7 @@
 
 #pragma once
 
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B6 }
-#define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5}
-
 #define TAP_CODE_DELAY 10
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

diff --git a/keyboards/makrosu/info.json b/keyboards/makrosu/info.json
@@ -8,6 +8,11 @@
         "pid": "0x8585",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B2", "B3", "B1", "F7", "F6", "F5"],
+        "rows": ["B6"]
+    },
+    "diode_direction": "COL2ROW",
     "encoder": {
         "rotary": [
             {"pin_a": "E6", "pin_b": "D1"}

diff --git a/keyboards/malevolti/lyra/rev1/config.h b/keyboards/malevolti/lyra/rev1/config.h
@@ -15,10 +15,4 @@
   */
 #pragma once
 
-// wiring of each half
-#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
-#define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 }
-
-#define DIODE_DIRECTION COL2ROW
-
 #define TAPPING_TERM 100
diff --git a/keyboards/malevolti/lyra/rev1/info.json b/keyboards/malevolti/lyra/rev1/info.json
@@ -8,6 +8,11 @@
         "pid": "0x4C43",
         "device_version": "30.3.1"
     },
+    "matrix_pins": {
+        "cols": ["B2", "B3", "B1", "F7", "F6", "F5", "F4"],
+        "rows": ["D4", "C6", "D7", "E6", "B4"]
+    },
+    "diode_direction": "COL2ROW",
     "split": {
         "soft_serial_pin": "D2"
     },

diff --git a/keyboards/malevolti/superlyra/rev1/config.h b/keyboards/malevolti/superlyra/rev1/config.h
@@ -15,10 +15,4 @@
   */ 
 #pragma once
 
-// wiring of each half
-#define MATRIX_ROW_PINS { B7, B3, B2, B1, B0 }
-#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, F7, F6, F5, F4, F1 }
-
-#define DIODE_DIRECTION COL2ROW
-
 #define TAPPING_TERM 100
diff --git a/keyboards/malevolti/superlyra/rev1/info.json b/keyboards/malevolti/superlyra/rev1/info.json
@@ -8,6 +8,11 @@
         "pid": "0x4C53",
         "device_version": "30.3.1"
     },
+    "matrix_pins": {
+        "cols": ["D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "F7", "F6", "F5", "F4", "F1"],
+        "rows": ["B7", "B3", "B2", "B1", "B0"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "caterina",
     "layouts": {

diff --git a/keyboards/manta60/config.h b/keyboards/manta60/config.h
@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D4, C6, D7, E6 ,B4}
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 #define SELECT_SOFT_SERIAL_SPEED 1
 
 #define RGB_DI_PIN D3

diff --git a/keyboards/manta60/info.json b/keyboards/manta60/info.json
@@ -8,6 +8,11 @@
         "pid": "0x991D",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2"],
+        "rows": ["D4", "C6", "D7", "E6", "B4"]
+    },
+    "diode_direction": "COL2ROW",
     "split": {
         "soft_serial_pin": "D2"
     },

diff --git a/keyboards/manyboard/macro/config.h b/keyboards/manyboard/macro/config.h
@@ -17,13 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-/* key matrix pins */
-#define MATRIX_ROW_PINS { D0, D1, D2, D3 }
-#define MATRIX_COL_PINS { D4, D5, D6, D7 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
 /* RGB Pins */
 #define RGB_DI_PIN B6
 #define RGBLED_NUM 2

diff --git a/keyboards/manyboard/macro/info.json b/keyboards/manyboard/macro/info.json
@@ -8,6 +8,11 @@
         "pid": "0x0015",
         "device_version": "1.0.3"
     },
+    "matrix_pins": {
+        "cols": ["D4", "D5", "D6", "D7"],
+        "rows": ["D0", "D1", "D2", "D3"]
+    },
+    "diode_direction": "ROW2COL",
     "encoder": {
         "rotary": [
             {"pin_a": "C6", "pin_b": "C7"}

diff --git a/keyboards/maple_computing/6ball/config.h b/keyboards/maple_computing/6ball/config.h
@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/* pin-out */
-#define MATRIX_ROW_PINS { F5 }
-#define MATRIX_COL_PINS { F4, D4, B5, B6, B2, F6 }
-
 /* ws2812 RGB LED */
 #define RGB_DI_PIN F7
 
@@ -37,7 +32,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLED_NUM 6    // Number of LEDs
 
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 #define TAPPING_TERM 200
diff --git a/keyboards/maple_computing/6ball/info.json b/keyboards/maple_computing/6ball/info.json
@@ -8,6 +8,11 @@
         "pid": "0x0007",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F4", "D4", "B5", "B6", "B2", "F6"],
+        "rows": ["F5"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "caterina",
     "layouts": {

diff --git a/keyboards/maple_computing/c39/config.h b/keyboards/maple_computing/c39/config.h
diff --git a/keyboards/maple_computing/c39/info.json b/keyboards/maple_computing/c39/info.json
@@ -8,6 +8,11 @@
         "pid": "0xCA39",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6", "D7", "E6", "C6", "D2", "D3"],
+        "rows": ["D1", "B4", "B5"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "caterina",
     "layouts": {