qmk · fauxpark · Jun 6, 2023 · Jun 2, 2023 · Jun 3, 2023 · Jun 3, 2023
diff --git a/keyboards/aleblazer/zodiark/config.h b/keyboards/aleblazer/zodiark/config.h
@@ -21,7 +21,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifdef RGBLIGHT_ENABLE
 #define RGBLED_NUM 68
 #define RGBLIGHT_SPLIT
-#define RGBLED_SPLIT { 34, 34 }
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/aleblazer/zodiark/info.json b/keyboards/aleblazer/zodiark/info.json
@@ -12,7 +12,8 @@
         "pin": "B5"
     },
     "rgblight": {
-        "max_brightness": 170
+        "max_brightness": 170,
+        "split_count": [34, 34]
     },
     "rgb_matrix": {
         "driver": "WS2812"

diff --git a/keyboards/arabica37/rev1/config.h b/keyboards/arabica37/rev1/config.h
@@ -19,7 +19,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #define RGBLED_NUM 50    // Number of LEDs
-#define RGBLED_SPLIT {25, 25}
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

diff --git a/keyboards/arabica37/rev1/info.json b/keyboards/arabica37/rev1/info.json
@@ -16,6 +16,9 @@
     "split": {
         "soft_serial_pin": "D2"
     },
+    "rgblight": {
+        "split_count": [25, 25]
+    },
     "ws2812": {
         "pin": "D3"
     },

diff --git a/keyboards/avalanche/v2/config.h b/keyboards/avalanche/v2/config.h
@@ -4,5 +4,4 @@
 #pragma once
 
 #define RGBLED_NUM 12
-#define RGBLED_SPLIT { 6, 6 }
 #define RGBLIGHT_SPLIT
diff --git a/keyboards/avalanche/v2/info.json b/keyboards/avalanche/v2/info.json
@@ -18,6 +18,9 @@
             {"pin_a": "B5", "pin_b": "F4", "resolution": 2}
         ]
     },
+    "rgblight": {
+        "split_count": [6, 6]
+    },
     "ws2812": {
         "pin": "D3"
     },

diff --git a/keyboards/avalanche/v3/config.h b/keyboards/avalanche/v3/config.h
@@ -4,5 +4,4 @@
 #pragma once
 
 #define RGBLED_NUM 12
-#define RGBLED_SPLIT { 7, 7 }
 #define RGBLIGHT_SPLIT
diff --git a/keyboards/avalanche/v3/info.json b/keyboards/avalanche/v3/info.json
@@ -21,6 +21,9 @@
     "split": {
         "soft_serial_pin": "D2"
     },
+    "rgblight": {
+        "split_count": [7, 7]
+    },
     "ws2812": {
         "pin": "D3"
     },

diff --git a/keyboards/avalanche/v4/config.h b/keyboards/avalanche/v4/config.h
@@ -5,7 +5,6 @@
 
 #ifdef RGBLIGHT_ENABLE
 #    define RGBLED_NUM 64
-#    define RGBLED_SPLIT { 32, 32 }
 #    define RGBLIGHT_SPLIT
 #    define RGBLIGHT_HUE_STEP  10    
 #    define RGBLIGHT_SAT_STEP  17    

diff --git a/keyboards/avalanche/v4/info.json b/keyboards/avalanche/v4/info.json
@@ -25,7 +25,8 @@
         "pin": "D3"
     },
     "rgblight": {
-        "max_brightness": 100
+        "max_brightness": 100,
+        "split_count": [32, 32]
     },
     "processor": "atmega32u4",
     "bootloader": "caterina",

diff --git a/keyboards/basekeys/slice/rev1_rgb/config.h b/keyboards/basekeys/slice/rev1_rgb/config.h
@@ -29,7 +29,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* RGB LED */
 #ifdef RGBLIGHT_ENABLE
 #define RGBLED_NUM 69    // Number of LEDs. backlight x69
-#define RGBLED_SPLIT { 34, 35 }
 #define RGBLIGHT_HUE_STEP 10
 #define RGBLIGHT_SAT_STEP 17
 #define RGBLIGHT_VAL_STEP 17

diff --git a/keyboards/basekeys/slice/rev1_rgb/info.json b/keyboards/basekeys/slice/rev1_rgb/info.json
@@ -20,7 +20,8 @@
         "pin": "D3"
     },
     "rgblight": {
-        "max_brightness": 120
+        "max_brightness": 120,
+        "split_count": [34, 35]
     },
     "processor": "atmega32u4",
     "bootloader": "caterina",

diff --git a/keyboards/bastardkb/dilemma/3x5_3/config.h b/keyboards/bastardkb/dilemma/3x5_3/config.h
@@ -43,14 +43,12 @@
 
 /* RGB settings. */
 #define RGBLED_NUM 36
-#define RGBLED_SPLIT \
-    { 18, 18 }
 
 /* RGB matrix support. */
 #ifdef RGB_MATRIX_ENABLE
 #    define SPLIT_TRANSPORT_MIRROR
 #    define RGB_MATRIX_LED_COUNT RGBLED_NUM
-#    define RGB_MATRIX_SPLIT RGBLED_SPLIT
+#    define RGB_MATRIX_SPLIT { 18, 18 }
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50
 #    define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
 #    define RGB_DISABLE_WHEN_USB_SUSPENDED

diff --git a/keyboards/bastardkb/dilemma/3x5_3/info.json b/keyboards/bastardkb/dilemma/3x5_3/info.json
@@ -15,6 +15,9 @@
     "split": {
         "soft_serial_pin": "GP1"
     },
+    "rgblight": {
+        "split_count": [18, 18]
+    },
     "ws2812": {
         "pin": "GP0",
         "driver": "vendor"

diff --git a/keyboards/bastardkb/scylla/config.h b/keyboards/bastardkb/scylla/config.h
@@ -20,14 +20,12 @@
 
 /* RGB settings. */
 #define RGBLED_NUM 58
-#define RGBLED_SPLIT \
-    { 29, 29 }
 
 /* RGB matrix support. */
 #ifdef RGB_MATRIX_ENABLE
 #    define SPLIT_TRANSPORT_MIRROR
 #    define RGB_MATRIX_LED_COUNT RGBLED_NUM
-#    define RGB_MATRIX_SPLIT RGBLED_SPLIT
+#    define RGB_MATRIX_SPLIT { 29, 29 }
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50
 #    define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
 #    define RGB_DISABLE_WHEN_USB_SUSPENDED

diff --git a/keyboards/bastardkb/scylla/info.json b/keyboards/bastardkb/scylla/info.json
@@ -3,6 +3,9 @@
     "usb": {
         "pid": "0x1829"
     },
+    "rgblight": {
+        "split_count": [29, 29]
+    },
     "layouts": {
         "LAYOUT_split_4x6_5": {
             "layout": [

diff --git a/keyboards/bastardkb/skeletyl/config.h b/keyboards/bastardkb/skeletyl/config.h
@@ -20,14 +20,12 @@
 
 /* RGB settings. */
 #define RGBLED_NUM 36
-#define RGBLED_SPLIT \
-    { 18, 18 }
 
 /* RGB matrix support. */
 #ifdef RGB_MATRIX_ENABLE
 #    define SPLIT_TRANSPORT_MIRROR
 #    define RGB_MATRIX_LED_COUNT RGBLED_NUM
-#    define RGB_MATRIX_SPLIT RGBLED_SPLIT
+#    define RGB_MATRIX_SPLIT { 18, 18 }
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50
 #    define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
 #    define RGB_DISABLE_WHEN_USB_SUSPENDED

diff --git a/keyboards/bastardkb/skeletyl/info.json b/keyboards/bastardkb/skeletyl/info.json
@@ -3,6 +3,9 @@
     "usb": {
         "pid": "0x1830"
     },
+    "rgblight": {
+        "split_count": [18, 18]
+    },
     "community_layouts": ["split_3x5_3"],
     "layouts": {
         "LAYOUT_split_3x5_3": {

diff --git a/keyboards/bastardkb/tbk/config.h b/keyboards/bastardkb/tbk/config.h
@@ -18,7 +18,6 @@
 #pragma once
 
 #define RGBLED_NUM 38
-#define RGBLED_SPLIT { 19, 19 }
 #define RGBLIGHT_SPLIT
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD

diff --git a/keyboards/bastardkb/tbk/info.json b/keyboards/bastardkb/tbk/info.json
@@ -5,6 +5,9 @@
         "device_version": "0.0.1",
         "pid": "0x1828"
     },
+    "rgblight": {
+        "split_count": [19, 19]
+    },
     "ws2812": {
         "pin": "D2"
     },

diff --git a/keyboards/bastardkb/tbkmini/config.h b/keyboards/bastardkb/tbkmini/config.h
@@ -20,14 +20,12 @@
 
 /* RGB settings. */
 #define RGBLED_NUM 42
-#define RGBLED_SPLIT \
-    { 21, 21 }
 
 /* RGB matrix support. */
 #ifdef RGB_MATRIX_ENABLE
 #    define SPLIT_TRANSPORT_MIRROR
 #    define RGB_MATRIX_LED_COUNT RGBLED_NUM
-#    define RGB_MATRIX_SPLIT RGBLED_SPLIT
+#    define RGB_MATRIX_SPLIT { 21, 21 }
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50
 #    define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
 #    define RGB_DISABLE_WHEN_USB_SUSPENDED

diff --git a/keyboards/bastardkb/tbkmini/info.json b/keyboards/bastardkb/tbkmini/info.json
@@ -3,6 +3,9 @@
     "usb": {
         "pid": "0x1828"
     },
+    "rgblight": {
+        "split_count": [21, 21]
+    },
     "community_layouts": ["split_3x6_3"],
     "layouts": {
         "LAYOUT_split_3x6_3": {

diff --git a/keyboards/bluebell/swoop/config.h b/keyboards/bluebell/swoop/config.h
@@ -29,8 +29,6 @@
   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
   #define RGBLIGHT_EFFECT_BREATHING
   #define RGBLED_NUM 36
-  #define RGBLED_SPLIT \
-        { 18, 18 }
   #define RGBLIGHT_SPLIT
   #define RGBLIGHT_HUE_STEP 10
   #define RGBLIGHT_SAT_STEP 17

diff --git a/keyboards/bluebell/swoop/info.json b/keyboards/bluebell/swoop/info.json
@@ -12,7 +12,8 @@
     "pin": "D3"
   },
   "rgblight": {
-    "max_brightness": 150
+    "max_brightness": 150,
+    "split_count": [18, 18]
   },
   "matrix_pins": {
     "cols": ["B1", "F7", "F6", "F5", "F4"],

diff --git a/keyboards/crkbd/r2g/config.h b/keyboards/crkbd/r2g/config.h
@@ -33,8 +33,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #   define RGBLIGHT_EFFECT_TWINKLE
 
 #   define RGBLED_NUM 54
-#   define RGBLED_SPLIT \
-        { 27, 27 }
 #endif
 
 #ifdef RGB_MATRIX_ENABLE

diff --git a/keyboards/crkbd/r2g/info.json b/keyboards/crkbd/r2g/info.json
@@ -5,6 +5,9 @@
     "split": {
         "soft_serial_pin": "D2"
     },
+    "rgblight": {
+        "split_count": [27, 27]
+    },
     "ws2812": {
         "pin": "D3"
     },

diff --git a/keyboards/crkbd/rev1/config.h b/keyboards/crkbd/rev1/config.h
@@ -20,8 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #ifdef RGBLIGHT_ENABLE
 #    define RGBLED_NUM 54 // Number of LEDs
-#    define RGBLED_SPLIT \
-        { 27, 27 }
 #    define RGBLIGHT_SPLIT
 #endif
 

diff --git a/keyboards/crkbd/rev1/info.json b/keyboards/crkbd/rev1/info.json
@@ -5,6 +5,9 @@
     "split": {
         "soft_serial_pin": "D2"
     },
+    "rgblight": {
+        "split_count": [27, 27]
+    },
     "ws2812": {
         "pin": "D3"
     },

diff --git a/keyboards/doppelganger/config.h b/keyboards/doppelganger/config.h
@@ -23,7 +23,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define RGBLED_NUM 2
 #define RGBLIGHT_SPLIT
-#define RGBLED_SPLIT { 1, 1 }
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

diff --git a/keyboards/doppelganger/info.json b/keyboards/doppelganger/info.json
@@ -22,6 +22,9 @@
             }
         }
     },
+    "rgblight": {
+        "split_count": [1, 1]
+    },
     "ws2812": {
         "pin": "B4"
     },

diff --git a/keyboards/elephant42/config.h b/keyboards/elephant42/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#    define RGBLED_SPLIT { 27, 27 }
 #    define RGBLED_NUM 54 // backlight x42 + underglow x12
 #    define RGBLIGHT_HUE_STEP 8
 #    define RGBLIGHT_SAT_STEP 8
@@ -36,7 +35,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifdef RGB_MATRIX_ENABLE
 #    define SPLIT_TRANSPORT_MIRROR
 #    define RGB_MATRIX_LED_COUNT RGBLED_NUM
-#    define RGB_MATRIX_SPLIT RGBLED_SPLIT
+#    define RGB_MATRIX_SPLIT { 27, 27 }
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 170
 #    define RGB_MATRIX_HUE_STEP RGBLIGHT_HUE_STEP
 #    define RGB_MATRIX_SAT_STEP RGBLIGHT_SAT_STEP

diff --git a/keyboards/elephant42/info.json b/keyboards/elephant42/info.json
@@ -12,7 +12,8 @@
         "driver": "WS2812"
     },
     "rgblight": {
-        "max_brightness": 170
+        "max_brightness": 170,
+        "split_count": [27, 27]
     },
     "matrix_pins": {
         "cols": ["F4", "F5", "F6", "F7", "B1", "B3"],

diff --git a/keyboards/ergoslab/rev1/config.h b/keyboards/ergoslab/rev1/config.h
@@ -18,10 +18,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #define RGBLED_NUM 2    // Number of LEDs
-// FIXME this following line should enable our layer status LEDs to work on both
-// sides without need to wire them into a chain. It doesn't though. Uncommenting
-// means the slave side of the keyboard stops working (and the LEDs don't work).
-// #define RGBLED_SPLIT {1,1}
 
 /*
  * Feature disable options

diff --git a/keyboards/flxlb/zplit/config.h b/keyboards/flxlb/zplit/config.h
@@ -31,7 +31,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* ws2812 RGB LED */
 #define RGBLED_NUM 16
 #define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 4, 5, 6, 7, 15, 14, 13, 12, 11, 10, 9, 8}
-#define RGBLED_SPLIT { 8, 8 }
 #define RGBLIGHT_SPLIT
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD

diff --git a/keyboards/flxlb/zplit/info.json b/keyboards/flxlb/zplit/info.json
@@ -18,6 +18,9 @@
             {"pin_a": "B0", "pin_b": "D2"}
         ]
     },
+    "rgblight": {
+        "split_count": [8, 8]
+    },
     "ws2812": {
         "pin": "D3"
     },

diff --git a/keyboards/giabalanai/config.h b/keyboards/giabalanai/config.h
@@ -36,11 +36,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifdef RGBLIGHT_ENABLE
 #   define RGBLED_NUM 123
 
-// Do not define "RGBLED_SPLIT" since somehow it doesn't work well yet.
-// Even thhough "#define RGBLED_SPLIT { 60, 63 }" was set, LEDs on the sub keyboad side didn't turn on.
-// Not sure but rgblight_sethsv_at() might not support RGBLED_SPLIT yet.
-// Instead, LED data is tranferred from right side to the left via TRRS cable.
-
 #   define RGBLIGHT_LAYERS
 
 // By default, LEDs of the buttons which are pressed turn on.

diff --git a/keyboards/halfcliff/config.h b/keyboards/halfcliff/config.h
@@ -27,7 +27,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
    #define RGBLED_NUM 10
    #define RGBLIGHT_SPLIT
-   #define RGBLED_SPLIT { 5, 5 }
    #define RGBLIGHT_HUE_STEP 8
    #define RGBLIGHT_SAT_STEP 8
    #define RGBLIGHT_VAL_STEP 8

diff --git a/keyboards/halfcliff/info.json b/keyboards/halfcliff/info.json
@@ -16,6 +16,9 @@
     "split": {
         "soft_serial_pin": "D2"
     },
+    "rgblight": {
+        "split_count": [5, 5]
+    },
     "ws2812": {
         "pin": "D3"
     },

diff --git a/keyboards/handwired/dactyl_manuform/dmote/62key/config.h b/keyboards/handwired/dactyl_manuform/dmote/62key/config.h
@@ -6,4 +6,3 @@
 #define RGBLIGHT_EFFECT_CHRISTMAS
 #define RGBLIGHT_EFFECT_CHRISTMAS_STEP 1
 #define RGBLED_NUM 6           // Used when chaining strips
-#define RGBLED_SPLIT { 3, 3 }  // Used when not chaining strips