Kopibeng XT87 Layout Additions & Touch-Up #22002
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[enhancement]
[enhancement]
[enhancement]
[enhancement]
Correct key positioning on the function row. [enhancement]
fauxpark
approved these changes
Sep 13, 2023
|
@noroadsleft from: to: |
|
Good call. I didn't think to check if Community Layout support was already enabled, and I see that it is, but the ISO layouts aren't correctly implemented. I'll hopefully remember to do that in the morning - it's just past 2 AM here and I'm turning in for the night. 🥱 |
[style]
Corrects the implementation of the ISO Community Layouts. [bugfix]
dunk2k
approved these changes
Sep 13, 2023
dlip
added a commit
to dlip/qmk_firmware
that referenced
this pull request
Sep 15, 2023
* upstream/master: (43 commits) OwLab Jelly Evolv Solder Layout Additions (qmk#22029) QVEX Tech Lynepad2 Layout Update (qmk#22030) `qmk format-json`: Add an in-place mode to format json command (qmk#21610) MonsGeek M1: Correct layout data (qmk#22026) Mode M256-WH Community Layout Support (qmk#22019) Mode M256-WS Community Layout Support (qmk#22020) Mechlovin Zed65 910 Layout Standardization (qmk#22018) Maze Studio Jocker 1800 Layout Additions (qmk#22016) Linworks Fave60a Community Layout Support (qmk#22015) Krado Industries Promenade Layout Additions (qmk#22014) Update to 'peterfalken' userspace configurations (qmk#21836) Kopibeng XT87 Layout Additions & Touch-Up (qmk#22002) Kibou Suisei Layout Addition (qmk#22001) Keebio NyquistPad Layout Updates (qmk#22000) Jaykeeb Sebelas: Standardize Layout Names (qmk#21999) Inland MK47 Community Layout Support (qmk#21998) Handwired ScottoKeebs Configurator Updates (qmk#21990) Gray Studio Think65 v3 Layout Additions (qmk#21930) Drewkeys Mercury65 Layout Additions (qmk#21924) Remove oversize binaries (qmk#21976) ...
philliphall
added a commit
to philliphall/qmk_firmware
that referenced
this pull request
Sep 21, 2023
* [Keyboard] Phoenix Project No 1 support (qmk#21068) Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * Revert "Equals keyboard" (qmk#21622) * Fix stuck note with square wave in additive DAC (qmk#21589) * [Keyboard] Add splitkb.com's Aurora Sofle v2 (qmk#21499) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Thomas Baart <mail@thomasbaart.nl> * On-each-release tap dance function (qmk#20255) Co-authored-by: Sergey Vlasov <sigprof@gmail.com> * Reduce needless precision in audio note frequency calculation (qmk#21496) * Remove needless precision in additive DAC sample generation (qmk#21498) * Amend documented `RGBLIGHT_HUE_STEP` default value (qmk#21617) * helix/rev3_4rows, helix/rev3_5rows: Fix build with converters (qmk#21608) The code for Helix rev3 boards could not be built with, e.g., `CONVERT_TO=rp2040_ce` due to invalid `#include <stdio.h>` in the keyboard level `config.h` (apparently the AVR version of that file contains guards against usage in assembly code, which was hiding the bug). Move `#include <stdio.h>` to the C sources which need it. * Unicode: move keycode aliases to a separate header (qmk#21613) * Unify MIDI note calculation with the audio feature's algorithm (qmk#21588) * [Keyboard] Add STM32f3 Discovery onekey (qmk#21625) * [Keyboard] Add Divine keyboard (qmk#21593) * Update keyboard report descriptor for USB compliance (qmk#21626) Running the "HID Tests" suite of the USB 3 Command Verifier (USB3CV) tool resulted in the following error: (HID: 3.2.61) The report descriptor returned in response to a GetDescriptor(Report) must be compliant with the HID specification. Byte Number: 37h ( 55d) Data Field: 91 02 Mnemonic: Output Value: (Variable) Errors: Error: LOGICAL MAX MUST be bounded by Report Size The error stems from the fact that logical minimum and maximum are global items, which means that the next item in a report descriptor inherits the value from the previously set value. In this case the status leds item inherited the logical minimum (=0) and maximum (=255) from the keycodes item. As the status leds set a report size of 1 bit, wich can only hold a boolean, it becomes clear that this range would never fit. The fix is straightforward, we just define a appropriate logical maximum (=1), the mismatch is solved and our keyboard now passes the compliance tests. Defining the logical minimum is redundant in this case but is kept to form a logical block. * [Keyboard] add itstleo40 PCB (qmk#21536) Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * [Keymap] update colemad crkbd (corne) keyboard (qmk#21515) Co-authored-by: Álvaro Cortés Devesa <alvarocortesdevesa@Alvaros-MacBook-Pro.local> * [Keyboard] Add ANAVI Macro Pad 12 (qmk#21547) * Updated info.json of c2 pro (qmk#21581) * quantum.h: clean up process_keycode includes (qmk#21579) * Bluetooth: driver naming cleanups (qmk#21624) * LED Matrix: driver naming cleanups (qmk#21580) * Correct "less than" to "up to" in squeezing_avr?id=layers (qmk#21639) * CLI: Improve error messages when layout key matrix row/col is OOB (qmk#21640) * Fix layout offsets for a handful of boards (qmk#21636) * keycode aliases: work around ChibiOS ch.h include guard (qmk#21497) * Remove old OLED API code (qmk#21651) * AMJKeyboard AMJ84 Develop Touch-Up (qmk#21645) * [style] refactor default keymap, phase 1 - grid-align keycodes - use QMK-native keycode aliases - update box drawings * [refactor] refactor default keymap, phase 2 - move position [5, 8] to the top row - update keycode grid alignment * [refactor] refactor default keymap, phase 3 - remove matrix position [5, 9] * Remove layout aliases from keyboard_aliases.hjson (qmk#21658) * Keychron Q11 ISO: Fix left Shift breakage due to a wrong matrix mask (qmk#21655) Keychron Q11 uses `matrix_mask` to mask away the matrix location used for `SPLIT_HAND_MATRIX_GRID` (otherwise the keyboard will constantly generate a wakeup request whenever the host enters suspend). However, the value of `matrix_mask` is actually chosen to mask away all unused locations, but it was apparently generated for the ANSI board and therefore masks away the left Shift key on the ISO board, breaking the functionality of that key. Fix `matrix_mask` to make the masking work as intended: - Set the `[4, 1]` bit to 1; this is the matrix location for the ISO left Shift. - Set the `[2, 5]` bit to 0; this is actually the matrix location which corresponds to `#define SPLIT_HAND_MATRIX_GRID A2, A15` on the left side, which was intended to be masked; apparently the wakeup problem does not happen due to `SPLIT_HAND_MATRIX_GRID_LOW_IS_RIGHT`, so the left half actually has that matrix location open. On the right side `A2, A15` is `[9, 6]`, which was masked off correctly. * Fix Dynamic Macro Compilation for avr-gcc 5.4.0 + Linux (qmk#21653) Co-authored-by: Joel Challis <git@zvecr.com> * Automata02 Alisaie Develop Touch-Up (qmk#21630) * Fix mouse-key spamming empty reports (qmk#21663) Problem: `mousekey_task` spams empty hid reports with when a mouse key is pressed, causing resource exhaustion in the USB mouse endpoint. Cause: The check whether or not to send a new mouse report would always evaluate to true if a mouse key is pressed: 1. `mouse_report` has non-zero fields and `tmpmr` is a copy of this fields. 2. `mouse_report` is set to zero, `tmpmr` has now non-zero fields. 3. `has_mouse_report_changed` compares the two and evaluates to true 4. a mouse report is sent. Fix: The check condition of `has_mouse_report_changed` will evaluate any empty record as unchanged, as mouse report data is relative and doesn't need to return to zero. An empty report will still be send by `register_mouse` on release of all mouse buttons. * audio: Don't play the first note of zero-note melodies (qmk#21661) * [Keyboard] Add Bento Box macropad (qmk#20521) * [Bug] Restore usb suspend wakeup delay (qmk#21676) * Respect USB_SUSPEND_WAKEUP_DELAY on wakeup This delay wasn't honored after removing `restart_usb_driver` from the suspend and wakeup handling. It is now re-introduced in the appropriate spot, namely after issuing a remote wakeup to a sleeping host. * Remove old, unused and commented testing code * moondrop/dash75: fix keymap (qmk#21680) * [Keyboard] Add PW88 keyboard (qmk#21482) Co-authored-by: Drashna Jaelre <drashna@live.com> * Clarify custom keycode enum requirement for PRs (qmk#21648) * Add VIA layout for Dactyl Manuform 5x6 (qmk#21649) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * haptic: further naming cleanups (qmk#21682) * Contributing docs: add note to make sure repo is up to date (qmk#21694) * Fix `binepad/bn009` and `durgod/dgk6x/hades_ansi` keymaps (qmk#21701) * doio/kb38: fix layout (qmk#21704) * Remove more legacy config.h options (qmk#21709) * Tidy up encoder in matrix references (qmk#21718) * [Keyboard] Update usb.* of `dactyl_lightcycle` (qmk#21462) * [Keyboard] add laneware `raindrop` keyboard (qmk#21277) Co-authored-by: Sergey Vlasov <sigprof@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com> * [Keyboard] Add Projectd/65/Projectd_65_ansi (qmk#21520) Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: gksygithub <106651989+gksygithub@users.noreply.github.com> * [Keymap] Add Via keymap for CXT Studio (qmk#21675) * [Keyboard] fix json for nemui65 (qmk#21629) * [Keyboard] Update USB settings for dactyl_maximus (qmk#21666) * [Keyboard] Add mk47 keyboard (qmk#19797) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Joy <chang.li@westberrytech.com> Co-authored-by: Joy Lee <joylee.lc@foxmail.com> * correct keymap file name for tkl_f13_jis layout (qmk#21631) * [Keyboard] Refactor Caticorn PCB (qmk#21644) * Kintwin controller for kinesis keyboard, split layout (qmk#21614) Co-authored-by: Ryan <fauxpark@gmail.com> * Fix `keyboard` field for some JSON keymaps (qmk#21752) * [Keyboard] Add Shostudio Arc (qmk#21733) * [Keymap] Update rpbaptist crkbd (qmk#21674) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Richard Baptist <richard@remote.com> * [Keymap] Update andrebrait keymap for GMMK Pro (qmk#21668) * [Keymap] submitting janat-t planck keymap (qmk#21619) Co-authored-by: Janat Taerakul <jtaerakul@indeed.com> * [keyboard] Graystudio Think6.5 V3 Support Revised (qmk#21560) Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: Ryan <fauxpark@gmail.com> * Remove invalid config option from kikoslab/kl90 (qmk#21708) * [Keyboard] Add Chouchou keyboard (qmk#21699) * OLED: driver naming cleanups (qmk#21710) * Update usb information for dactyl_cc (qmk#21612) * rgblight: driver selection cleanups (qmk#21558) * [Keyboard] add willoucom/keypad (qmk#21714) * Add ScottoErgo Keyboard (qmk#20944) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * Add Scotto34 Keyboard (qmk#20943) Co-authored-by: Albert Y <76888457+filterpaper@users.noreply.github.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * Add ScottoInvader Keyboard (qmk#20941) Co-authored-by: Ryan <fauxpark@gmail.com> * coarse/cordillera: fix backlight config (qmk#21761) * The PoweredByPorridge layout for the Keyboardio Atreus (qmk#21737) Co-authored-by: jack <0x6a73@protonmail.com> * [Keymap] add squigglybob splitkb kyria rev2 keymap (qmk#21751) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> * [Bug] Fix compilation error for APA on ChibiOS (qmk#21773) * Add Galatea rev3 keyboard (qmk#21758) * Adding support for TAN67 PCB (qmk#21003) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * [Keyboard] Add Jelly Evolv (qmk#21407) Co-authored-by: jack <0x6a73@protonmail.com> * [Keyboard] Add linworks favepada (qmk#20794) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> * Initial support for ALT v2 (qmk#21754) * Initial support for CTRL v2 (qmk#21755) * Initial support for SHIFT v2 (qmk#21756) * Align SENSE75 with recent Drop additions (qmk#21757) * Fix drop/shift/v2 compilation (qmk#21800) * [Keyboard] Add city42 (qmk#21727) Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * fix: restore indicators to jellybean_raindrops (qmk#21792) After qmk#21169, rgb_matrix_indicators() was limited to running on the final render iteration. Since the jellybean_raindrops animation immediately returns false after updating a single LED, the iteration count no longer ends up high enough to render non-advanced indicators. This change also brings jellybean_raindrops more in line with raindrops. * Simplfy RGB/LED matrix effect logic (qmk#21703) * RGB Matrix: driver naming cleanups (qmk#21594) * Fix keyboards with old RGB driver names (qmk#21815) * [Doc] Improve magic keycode section (qmk#21787) * Fix keyboards with old RGB driver names (qmk#21817) * keychron/c2_pro/ansi/white: Fix column 19 in the custom matrix (qmk#21805) Although `keychron/c2_pro/ansi/rgb` and `keychron/c2_pro/ansi/white` use the same custom matrix code, the matrix layouts are slightly different; in particular, only the `keychron/c2_pro/ansi/white` board actually uses column 19. However, the handling of column 19 in the custom matrix code was broken, therefore that column did not work. Looks like the custom matrix code assumes that `SHIFT_COL_END` refers to the last column connected to the shift register, and not to the column past that; so the value of `SHIFT_COL_END` needs to be changed from 19 to 18 (columns 11...18 are connected to the shift register, and column 19 is connected to the C14 pin). Also the code which was determining `SIZE_T` and `UNSELECT_ALL_COL` had an off-by-one bug when counting the required number of bits (again due to the confusion on the `SHIFT_COL_END` meaning); this had been fixed too (the actual behavior of that part of the code did not change, because both the old and the new version select the 8 bit variant). * Fix infinite recursion in lxxt encoder logic (qmk#21819) * Bump tj-actions/changed-files from 37 to 38 (qmk#21822) Bumps [tj-actions/changed-files](https://github.com/tj-actions/changed-files) from 37 to 38. - [Release notes](https://github.com/tj-actions/changed-files/releases) - [Changelog](https://github.com/tj-actions/changed-files/blob/main/HISTORY.md) - [Commits](tj-actions/changed-files@v37...v38) --- updated-dependencies: - dependency-name: tj-actions/changed-files dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Generalize AVR -Werror=array-bounds workaround (qmk#21798) GCC 13 needs the same workaround as GCC 12. To avoid having to maintain an ever-growing list of broken versions apply the workaround wherever it can be used. If at some point a fixed version of GCC is released the workaround can be disabled for those fixed versions. See qmk#17064 * Move RGBLight animations to data driven (qmk#21635) * Move RGBLight animations to data driven, 0-9 * Move RGBLight animations to data driven, A * Move RGBLight animations to data driven, B * Move RGBLight animations to data driven, C * Move RGBLight animations to data driven, D * Move RGBLight animations to data driven, E * Move RGBLight animations to data driven, F * Move RGBLight animations to data driven, G * Move RGBLight animations to data driven, H * Move RGBLight animations to data driven, handwired * Move RGBLight animations to data driven, I * Move RGBLight animations to data driven, J * Move RGBLight animations to data driven, K * Move RGBLight animations to data driven, L * Move RGBLight animations to data driven, M * Move RGBLight animations to data driven, N * Move RGBLight animations to data driven, O * Move RGBLight animations to data driven, P * Move RGBLight animations to data driven, Q * Move RGBLight animations to data driven, R * Move RGBLight animations to data driven, S * Move RGBLight animations to data driven, T * Move RGBLight animations to data driven, U * Move RGBLight animations to data driven, V * Move RGBLight animations to data driven, W * Move RGBLight animations to data driven, X * Move RGBLight animations to data driven, Y * Move RGBLight animations to data driven, Z * Fix incorrect placement * Fix build failures and mismatches * converter/ibm_terminal: Fix F0_BREAK state transition (qmk#21824) * Remove `led_matrix.hue_steps` and `led_matrix.sat_steps` from schema (qmk#21827) * Add "apm32-dfu" in keyboard.jsonschema (qmk#21842) * Corrected duration example, should be number not string (qmk#21839) * Rework info.json reference (qmk#21324) * Rework info.json reference * Apply suggestions from code review Co-authored-by: Sergey Vlasov <sigprof@gmail.com> * Update backlight.pins description * Add rgblight.driver and lowercase other driver names * Remove `split.main` and `split.matrix_grid` for now as they are not working yet --------- Co-authored-by: Sergey Vlasov <sigprof@gmail.com> * Revert changes to ChibiOS Suspend Code (qmk#21830) * Partially revert qmk#19780 * Finish * Get teensy 3.5/3.6 board files too * fix lint issue * Revert "[Bug] Restore usb suspend wakeup delay (qmk#21676)" This reverts commit e8e989f. * Apply suggestions from code review Co-authored-by: Joel Challis <git@zvecr.com> --------- Co-authored-by: Joel Challis <git@zvecr.com> * Add *_MATRIX_LED_COUNT generation (qmk#21110) * Unicode, Unicodemap and UCIS refactor (qmk#21659) * Clean up Unicode API usage in user keymaps (qmk#21849) * Breaking changes changelog, 2023q3 version (qmk#21848) Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: honorless <86894501+lesshonor@users.noreply.github.com> * Remove develop notice. * Fix compilation of dynamic_keymap.c without VIA (qmk#21858) * fix 60_hhkb ASCII diagram (qmk#21813) * chore(ferris/test): visually format keymap (qmk#21851) ... and set all keys to printable characters (as described in the keymap's readme) * fix 60_jis keymap.c (qmk#21820) * Fix invalid encoder_map declaration (qmk#21868) * Update keymap.c to add encoder (qmk#21469) * Update keymap.c to add encoder * Fix build --------- Co-authored-by: zvecr <git@zvecr.com> * doio/kb16: Added timeout option for OLED boot logo. (qmk#21823) * Revert "fix 60_hhkb ASCII diagram (qmk#21813)" (qmk#21869) This reverts commit af2d6ea. * CannonKeys Meetup Pad 2023 (qmk#21806) Co-authored-by: Ryan <fauxpark@gmail.com> * [keyboard] add sweeq, a ferris/sweep variant with diodes (qmk#21597) * Update macOS install script (qmk#21854) * Abko AK84BT Layout Touch-Up (qmk#21876) * [refactor] rename LAYOUT_75_ansi to LAYOUT * [enhancement] touch-up layout * AH Haven65 Community Layout support (qmk#21880) * [refactor] rename LAYOUT to LAYOUT_65_ansi_blocker * [enhancement] enable Community Layout support * nullbitsco/snap: fix broken keymaps (qmk#21877) * chore: ignore virtual environment directory (qmk#20905) * Add 1upkeyboards Super16v3 (qmk#21665) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * [keyboard] add redragon/k667 (qmk#21417) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: syc <squall_sha@163.com> * Add M6-C Keyboard Firmware (qmk#21852) Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Wolf <contact@vwolf.be> * Added kiserdesigns keyboard folder and Madeline keyboard (qmk#21857) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * redragon/k667: Remove 2 layer VIA restriction (qmk#21889) * AH Haven80 Community Layout support (qmk#21885) * [enhancement] correct layout data * [refactor] rename LAYOUT to LAYOUT_tkl_f13_ansi_tsangan * [enhancement] enable Community Layout support * Haven80 Solder: add LAYOUT_tkl_f13_ansi_tsangan_split_bs_rshift [enhancement] * Haven80 Solder: add LAYOUT_tkl_f13_iso_tsangan_split_bs_rshift [enhancement] * Haven80 Solder: add LAYOUT_tkl_f13_iso_tsangan [enhancement] * Haven80 Solder: extend Community Layout support [enhancement] * ANAVI Macro Pad 12: rename LAYOUT to LAYOUT_ortho_4x3 (qmk#21886) [refactor] * Chosfox CF81: correct layout data (qmk#21902) * Auto-label data-driven efforts (qmk#21900) * CannonKeys Bastion75 Layout Additions (qmk#21899) * [docs] add layout/matrix diagram * [refactor] rename LAYOUT to LAYOUT_all * [enhancement] add LAYOUT_ansi_blocker_split_bs * [enhancement] add LAYOUT_ansi_blocker * [enhancement] add LAYOUT_ansi_blocker_tsangan_split_bs * [enhancement] add LAYOUT_ansi_blocker_tsangan * [enhancement] add LAYOUT_iso_blocker_split_bs * [enhancement] add LAYOUT_iso_blocker * [enhancement] add LAYOUT_iso_blocker_tsangan_split_bs * [enhancement] add LAYOUT_iso_blocker_tsangan * CannonKeys Bastion60 Layout Additions (qmk#21887) * [bugfix] correct LAYOUT_60_iso_tsangan key order * [docs] add layout/matrix diagram * [enhancement] add LAYOUT_60_tsangan_hhkb * [enhancement] add LAYOUT_60_ansi_tsangan * [enhancement] add LAYOUT_60_iso * [enhancement] add LAYOUT_60_iso_split_bs_rshift * [enhancement] add LAYOUT_60_iso_tsangan_split_bs_rshift * [enhancement] add LAYOUT_60_hhkb * [enhancement] extend Community Layout support * CannonKeys Bastion65 Layout Additions (qmk#21888) * [docs] add layout/matrix diagram * [refactor] rename LAYOUT to LAYOUT_all * [enhancement] add LAYOUT_65_ansi_blocker_split_bs * [enhancement] add LAYOUT_65_ansi_blocker * [enhancement] add LAYOUT_65_ansi_blocker_tsangan_split_bs * [enhancement] add LAYOUT_65_ansi_blocker_tsangan * [enhancement] add LAYOUT_65_iso_blocker_split_bs * [enhancement] add LAYOUT_65_iso_blocker * [enhancement] add LAYOUT_65_iso_blocker_tsangan_split_bs * [enhancement] add LAYOUT_65_iso_blocker_tsangan * [enhancement] enable Community Layout support * CannonKeys BastionTKL Layout Additions (qmk#21901) * [docs] add layout/matrix diagram * [enhancement] add LAYOUT_tkl_ansi_split_bs_rshift * [enhancement] add LAYOUT_tkl_ansi_tsangan_split_bs_rshift * [enhancement] add LAYOUT_tkl_ansi_tsangan * [enhancement] add LAYOUT_tkl_f13_ansi_tsangan * [enhancement] add LAYOUT_tkl_f13_ansi_split_bs_rshift * [enhancement] add LAYOUT_tkl_f13_ansi * [enhancement] correct LAYOUT_tkl_iso key order * [enhancement] add LAYOUT_tkl_iso_split_bs_rshift * [enhancement] add LAYOUT_tkl_iso_tsangan_split_bs_rshift * [enhancement] add LAYOUT_tkl_iso_tsangan * [enhancement] add LAYOUT_tkl_f13_iso_split_bs_rshift * [enhancement] add LAYOUT_tkl_f13_iso * [enhancement] add LAYOUT_tkl_f13_iso_tsangan_split_bs_rshift * [enhancement] add LAYOUT_tkl_f13_iso_tsangan * [enhancement] extend Community Layout support * Bump actions/checkout from 3 to 4 (qmk#21907) Bumps [actions/checkout](https://github.com/actions/checkout) from 3 to 4. - [Release notes](https://github.com/actions/checkout/releases) - [Changelog](https://github.com/actions/checkout/blob/main/CHANGELOG.md) - [Commits](actions/checkout@v3...v4) --- updated-dependencies: - dependency-name: actions/checkout dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * GMMK2 65% ISO: Correct layout data (qmk#21925) Correct key sizes/positioning on the right side of the board. * [Docs] Improve contrast for warnings in dark mode (qmk#21928) * GMMK2 96% ANSI: Correct layout data (qmk#21937) [enhancement] * Cipulot EC Theca Community Layout Support (qmk#21913) * Alias `LAYOUT_all` as `LAYOUT_tkl_ansi` The data for `LAYOUT_all` and `LAYOUT_tkl_ansi` is identical, so alias the former to the latter to reduce redundancy. [refactor] * Rename `LAYOUT_tkl_ansi_tsangan_wkl` to `LAYOUT_tkl_ansi_wkl` [refactor] * Enable Community Layout support [enhancement] * customMK EVO70 R2 Layout Additions (qmk#21916) * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add layout/matrix diagram [docs] * Correct layout data Reduce the gap between the encoder/macro section and the alphanumeric section by 0.25u. [enhancement] * Add `LAYOUT_ansi_blocker` [enhancement] * Add `LAYOUT_iso_blocker` [enhancement] * Fix redundant `layout_aliases` keys per dunk2k [bugfix] * [Keyboard] Add Binepad Pixie (qmk#21524) * Add Binepad Pixie * Post waffle87 and drashna review recommendations applied * Post-drashna code review suggestions applied Co-authored-by: Drashna Jaelre <drashna@live.com> * post zvecr review --------- Co-authored-by: Drashna Jaelre <drashna@live.com> * dnworks FRLTKL Community Layout support (qmk#21922) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_tkl_nofrow_iso_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_tsangan` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_wkl` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_tsangan` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_wkl` [enhancement] * Enable Community Layout support [enhancement] * Repair malformed links in keyboard README files (qmk#21969) * Remove oversize binaries (qmk#21976) This stops a situation where a user could end up flashing oversize firmware soft bricking hardware. * Drewkeys Mercury65 Layout Additions (qmk#21924) * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add layout/matrix diagram [docs] * Correct `LAYOUT_all` data Correct the order of the Up arrow and End keys. [enhancement] * Tidy-up `info.json` formatting - add line breaks between physical rows - remove trailing spaces [style] * Add `LAYOUT_iso_blocker_split_bs` [enhancement] * Add `LAYOUT_iso_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_ansi_blocker_split_bs` [enhancement] * Add `LAYOUT_ansi_blocker_tsangan_split_bs` [enhancement] * Gray Studio Think65 v3 Layout Additions (qmk#21930) * Add layout/matrix diagram [docs] * Format `info.json` as strict JSON [style] * Add `LAYOUT_all` [enhancement] * Refactor keymaps to use `LAYOUT_all` Refactor the `default` and `via` keymaps to use the `LAYOUT_all` macro. - change second Left Shift key to `KC_NUBS` - insert `KC_NUHS` keycode - update keycode grid alignment - remove trailing whitespace [refactor] * Rename `LAYOUT_65_blocker` to `LAYOUT_ansi_blocker` [refactor] * Rename `LAYOUT_65_iso_blocker` to `LAYOUT_iso_blocker` [refactor] * Correct `LAYOUT_iso_blocker` matrix data The Quote key was mapped as [1, 14] instead of [2, 12]. [bugfix] * Add `LAYOUT_ansi_blocker_split_bs` [enhancement] * Add `LAYOUT_ansi_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_ansi_blocker_tsangan` [enhancement] * Add `LAYOUT_iso_blocker_split_bs` [enhancement] * Add `LAYOUT_iso_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_iso_blocker_tsangan` [enhancement] * Handwired ScottoKeebs Configurator Updates (qmk#21990) * ScottoKeebs ScottoAlp: Correct layout data [enhancement] * ScottoKeebs ScottoCMD: Correct layout data [enhancement] * ScottoKeebs ScottoErgo: Correct layout data Add hand separation and vertical stagger to the layout data. [enhancement] * ScottoKeebs ScottoFrog: Correct layout data [enhancement] * ScottoKeebs ScottoGame: Correct layout data [enhancement] * ScottoKeebs ScottoInvader: Correct layout data [enhancement] * ScottoKeebs ScottoNum: Correct layout data [enhancement] * ScottoKeebs ScottoSplit: Correct layout data [enhancement] * ScottoKeebs ScottoStarter: Correct layout data [enhancement] * Inland MK47 Community Layout Support (qmk#21998) * Rename `LAYOUT` to `LAYOUT_planck_mit` [refactor] * Enable Community Layout support [enhancement] * Touch-up keymaps - grid-align keycodes [style] * Jaykeeb Sebelas: Standardize Layout Names (qmk#21999) * Rename `LAYOUT_65_ansi_blocker` to `LAYOUT_ansi_blocker` [refactor] * Rename `LAYOUT_65_ansi_blocker_split_bs` to `LAYOUT_ansi_blocker_split_bs` [refactor] * Rename `LAYOUT_65_ansi_blocker_tsangan` to `LAYOUT_ansi_blocker_tsangan` [refactor] * Rename `LAYOUT_65_ansi_blocker_tsangan_split_bs` to `LAYOUT_ansi_blocker_tsangan_split_bs` [refactor] * Keebio NyquistPad Layout Updates (qmk#22000) * Rename `LAYOUT` to `LAYOUT_ortho_5x6` [refactor] * Add `LAYOUT_ortho_5x6_1x2u` [enhancement] * Kibou Suisei Layout Addition (qmk#22001) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_65_ansi_blocker_tsangan_wkl_split_bs` [refactor] * Add `LAYOUT_65_ansi_blocker_tsangan_wkl` [enhancement] * Kopibeng XT87 Layout Additions & Touch-Up (qmk#22002) * Add `LAYOUT_tkl_ansi_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_ansi_wkl` [enhancement] * Add `LAYOUT_tkl_iso_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_iso_wkl` [enhancement] * Correct layout data Correct key positioning on the function row. [enhancement] * Friendly-format `info.json` [style] * Move ISO Enter to Home Row Corrects the implementation of the ISO Community Layouts. [bugfix] * Update to 'peterfalken' userspace configurations (qmk#21836) * Krado Industries Promenade Layout Additions (qmk#22014) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Correct key order [bugfix] * Add `LAYOUT_2x2u` [enhancement] * Add `LAYOUT_2x3u` [enhancement] * Add `LAYOUT_6u_space` [enhancement] * Add `LAYOUT_7u_space` [enhancement] * Touch-up `via` keymap Update keycode grid alignment to match the `default` keymap. [style] * Linworks Fave60a Community Layout Support (qmk#22015) * Friendly-format `info.json` [style] * Correct layout data [chore] * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_60_tsangan_hhkb` [refactor] * Add `LAYOUT_60_ansi_tsangan` [enhancement] * Enable Community Layout support [enhancement] * Maze Studio Jocker 1800 Layout Additions (qmk#22016) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_ansi_split_bs` [refactor] * Add `LAYOUT_ansi` [enhancement] * Add `LAYOUT_ansi_wkl_split_bs` [enhancement] * Add `LAYOUT_ansi_wkl` [enhancement] * Mechlovin Zed65 910 Layout Standardization (qmk#22018) * Add layout/matrix diagram [docs] * Rename `LAYOUT_65_iso_tsangan_split_bs` to `LAYOUT_iso_split_bs` [refactor] * Rename `LAYOUT_65_ansi_tsangan` to `LAYOUT_ansi` [refactor] * Rename `LAYOUT_65_ansi_blocker_tsangan` to `LAYOUT_ansi_blocker_tsangan` [refactor] * Rename `LAYOUT_65_ansi_tsangan_split_bs` to `LAYOUT_all` [refactor] * Mode M256-WS Community Layout Support (qmk#22020) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_65_ansi_blocker_split_bs` [enhancement] * Add `LAYOUT_65_ansi_blocker` [enhancement] * Add `LAYOUT_65_ansi_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_65_ansi_blocker_tsangan` [enhancement] * Add `LAYOUT_65_iso_blocker_split_bs` [enhancement] * Add `LAYOUT_65_iso_blocker` [enhancement] * patch `LAYOUT_65_iso_blocker_split_bs` * patch `LAYOUT_65_iso_blocker` * Add `LAYOUT_65_iso_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_65_iso_blocker_tsangan` [enhancement] * Enable Community Layout support [enhancement] * Mode M256-WH Community Layout Support (qmk#22019) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_65_ansi_blocker` [refactor] * Add `LAYOUT_65_ansi_blocker_tsangan` [enhancement] * Enable Community Layout support [enhancement] * MonsGeek M1: Correct layout data (qmk#22026) Apply vertical offset to the arrow keys. [chore] * `qmk format-json`: Add an in-place mode to format json command (qmk#21610) * QVEX Tech Lynepad2 Layout Update (qmk#22030) * Add layout/matrix diagram [docs] * Update layout data Update layout data to disambiguate the key/joystick/thumbpad functions in Configurator. [chore] * OwLab Jelly Evolv Solder Layout Additions (qmk#22029) * Add layout/matrix diagram [docs] * Friendly-format `info.json` [style] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_ansi_blocker` [enhancement] * Add `LAYOUT_ansi_blocker_split_bs` [enhancement] * Add `LAYOUT_ansi_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_ansi_blocker_tsangan` [enhancement] * Add `LAYOUT_iso_blocker` [enhancement] * Add `LAYOUT_iso_blocker_split_bs` [enhancement] * Add `LAYOUT_iso_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_iso_blocker_tsangan` [enhancement] * Nix Studio Lilith Layout Additions (qmk#22028) * Add layout/matrix diagram [docs] * Sort keys in `info.json` [style] * Add `LAYOUT_65_ansi_blocker_split_bs` [enhancement] * Add `LAYOUT_65_ansi_blocker_tsangan` [enhancement] * Add `LAYOUT_65_iso_blocker_split_bs` [enhancement] * Add `LAYOUT_65_iso_blocker_tsangan_split_bs` [enhancement] * Extend Community Layout support [enhancement] * Neson Design Nico Layout Additions (qmk#22027) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_65_xt_ansi_blocker_split_bs` [refactor] * Add `LAYOUT_65_xt_ansi_blocker` [enhancement] * Add `LAYOUT_65_xt_ansi_blocker_tsangan` [enhancement] * Add `LAYOUT_65_xt_ansi_blocker_tsangan_split_bs` [enhancement] * Touch-up keymaps - grid-align keycodes - use four-space indent - use QMK-native keycode aliases [refactor] * Update `via` keymap Update the `via` keymaps to have the same key assignments as the `default` keymap, which is more fleshed out. [chore] * [Keyboard] Add splitkb.com's Aurora Helix (qmk#21871) Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: Ryan <fauxpark@gmail.com> * [Keyboard] add 1upkeyboards 1upslider8 (qmk#21546) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * [Keyboard] Adding Treasure TYPE-9 series III (qmk#21748) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * Raindrop Layout Updates (qmk#22032) * Add layout/matrix diagram [docs] * Rename `LAYOUT_all` to `LAYOUT_64_ansi_split_bs` [refactor] * Add `LAYOUT_60_ansi_split_bs_rshift` [enhancement] * Rico Phoenix Project No. 1 Layout Additions (qmk#22035) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_65_ansi_rwkl_split_bs` [enhancement] * Add `LAYOUT_65_ansi_rwkl` [enhancement] * Add `LAYOUT_65_ansi_wkl_split_bs` [enhancement] * Add `LAYOUT_65_ansi_wkl` [enhancement] * Add `LAYOUT_65_iso_rwkl_split_bs` [enhancement] * Add `LAYOUT_65_iso_rwkl` [enhancement] * Add `LAYOUT_65_iso_wkl_split_bs` [enhancement] * Add `LAYOUT_65_iso_wkl` [enhancement] * RuckerMachine RM Fullsize Layout Additions (qmk#22036) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_fullsize_108_ansi` [enhancement] * Add `LAYOUT_fullsize_108_ansi_tsangan` [enhancement] * Sho Studios ARC Layout Addition (qmk#22037) * Add layout/matrix diagram [docs] * Format `info.json` Apply four-space indent. [style] * Add `LAYOUT_ansi_split_bs` [enhancement] * Move Digitizer to "Software Features" (qmk#22031) * Add missing gpio and chibios defs to uart.h (qmk#22033) * Fix paragon encoder pinout for soldered version (qmk#22043) * geistmaschine/macropod: fix issues waking up after suspend on apple devices (qmk#22023) * Add all RGB Matrix Animations to city42 (qmk#21992) * Viktus Styrka Topre Layout Standardization and Touch-Up (qmk#22044) * Add layout/matrix diagram [docs] * Alias `LAYOUT_all` to `LAYOUT_split_6u` `LAYOUT_all` and `LAYOUT_split_6u` represent the same matrix positions and sequence, so implement the former as an alias. [refactor] * Touch-up keymaps - grid-align keycodes - use QMK-native keycode aliases [chore] * Friendly-format `info.json` [style] * Correct layout data Correct key sizes/positioning on the bottom row. [chore] * Rename `LAYOUT_2u_6u` to `LAYOUT_65_xt_ansi_blocker` [refactor] * Rename `LAYOUT_2u_7u` to `LAYOUT_65_xt_ansi_blocker_tsangan` [refactor] * Rename `LAYOUT_split_6u` to `LAYOUT_65_xt_ansi_blocker_split_bs` [refactor] * Rename `LAYOUT_split_7u` to `LAYOUT_65_xt_ansi_blocker_tsangan_split_bs` [refactor] * Wolf Neely65 Touch-Up (qmk#22045) * Add layout/matrix diagram [docs] * Friendly-format `info.json` [style] * Touch-up keymaps - grid-align keycodes - use QMK-native keycode aliases [refactor] * Fix keymaps Fix keycodes being assigned out of order with respect to `info.json`. - move XT function keys to left side - move keycodes for position [2, 14] from Home Row to Number Row [bugfix] * Rename `LAYOUT` to `LAYOUT_65_xt_ansi_blocker_tsangan_wkl_split_bs` [refactor] * Add `LAYOUT_65_xt_ansi_blocker_tsangan_wkl` [enhancement] * Wolf Silhouette Community Layout Support (qmk#22052) * Add layout/matrix diagram [docs] * Friendly-format `info.json` [style] * Touch-up layout data Move the ISO Hash key to the main key area. [chore] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_tkl_nofrow_ansi_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_tsangan` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_wkl` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_tsangan` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_wkl` [enhancement] * Enable Community Layout support [enhancement] * Wolf Ziggurat Layout Additions (qmk#22053) * Add layout/matrix diagram [docs] * Friendly-format `info.json` [style] * Touch-up layout data Move the ISO Hash key to the main key area. [chore] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_65_xt_ansi_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_65_xt_ansi_blocker_tsangan` [enhancement] * Add `LAYOUT_65_xt_iso_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_65_xt_iso_blocker_tsangan` [enhancement] * Adding support for the Pteron56 (PCB) keyboard (qmk#21731) * Add missing gpio include to ps2 vendor (qmk#22063) * [Keyboard] Add riot pad (qmk#22060) Co-authored-by: ShandonCodes <shandon@shandon.codes> * DZTech Pluto Community Layout support (qmk#22069) * Add layout/matrix diagram [docs] * Friendly-format `info.json` - apply four-space indent - sort JSON keys in layout objects [style] * Correct `LAYOUT_all` data Correct key sizes/positions of: - ANSI Backslash [1, 13] - ANSI Enter [1, 14] - Fn [3, 13] [chore] * Correct `LAYOUT_iso` data Correct position of Fn key [3, 13]. [chore] * Add `LAYOUT_tkl_nofrow_ansi_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_tsangan` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_wkl` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_tsangan` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_wkl` [enhancement] * Enable Community Layout support [enhancement] * Touch-up keymaps Update keycode grid alignment. [style] * Ubest VN Community Layout Support (qmk#22070) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_65_ansi_split_bs` [enhancement] * Add `LAYOUT_65_ansi` [enhancement] * Add `LAYOUT_65_iso_split_bs` [enhancement] * Add `LAYOUT_65_iso` [enhancement] * Enable Community Layout support [enhancement] * Touch-up keymaps - apply four-space indent - grid-align keycodes [style] * Add OLED logo DP3000 macropad (qmk#21936) * SapuSeven MacroPad12: rename LAYOUT to LAYOUT_ortho_3x4 (qmk#22081) * Alchemist Keyboards OGRN Layout Addition (qmk#22080) * Add layout/matrix diagram [docs] * Friendly-format `info.json` [style] * Add `LAYOUT_ortho_5x4` [enhancement] * Touch-up keymaps - update grid-alignment (layer-to-layer consistency) - fix box drawings [style] * Extend Community Layout support Add `ortho_5x4` to supported Community Layouts. [enhancement] * amend 96_(ansi|iso) community_layouts in keyboards/ (qmk#22066) * Restrict "feature" and "animation" keys (qmk#21895) * [Keyboard] Momokai Aurora (qmk#20419) Co-authored-by: Albert Y <76888457+filterpaper@users.noreply.github.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Joel Challis <git@zvecr.com> * [Keyboard] add Quokka keyboard (qmk#20979) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * apply 66_(ansi|iso) to keyboards (qmk#21834) * Add ScottoSlant Keyboard (qmk#20942) Co-authored-by: Ryan <fauxpark@gmail.com> * Add ScottoMouse Handwired Macropad (qmk#21074) Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Albert Y <76888457+filterpaper@users.noreply.github.com> * Add ScottoFly Keyboard (qmk#20939) Co-authored-by: Ryan <fauxpark@gmail.com> * Add ScottoMacrodeck Macropad (qmk#20946) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * Add ScottoLong Keyboard (qmk#20938) Co-authored-by: Ryan <fauxpark@gmail.com> * Add funtions of Encoder and VIA for redragon/k667 (qmk#21917) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: syc <squall_sha@163.com> * [Keyboard] Add rpk-001 keyboard (qmk#21042) Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: Joy <chang.li@westberrytech.com> * amend 68_(ansi|iso) community_layouts in keyboards/ (qmk#21835) * [Keyboard] Add QCK-75 (qmk#21180) Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Quarkeys Studio Z67 Solder Community Layout Support (qmk#22095) * Quarkeys Studio Z67 Hotswap Community Layout Support (qmk#22096) * kimiko: mirror encoder pins between halves (qmk#21728) * Keychron q9 plus (qmk#21399) Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * add dz60v2 keyboard (qmk#21862) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * add odinmini layout (qmk#21983) Co-authored-by: Ryan <fauxpark@gmail.com> --------- Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: Rico <95101980+mymakercorner@users.noreply.github.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: QMK Bot <hello@qmk.fm> Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: Nebuleon <2391500+Nebuleon@users.noreply.github.com> Co-authored-by: harveysch <126267034+harveysch@users.noreply.github.com> Co-authored-by: Thomas Baart <mail@thomasbaart.nl> Co-authored-by: leep-frog <66687468+leep-frog@users.noreply.github.com> Co-authored-by: Sergey Vlasov <sigprof@gmail.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: Stefan Kerkmann <karlk90@pm.me> Co-authored-by: era <73109780+eerraa@users.noreply.github.com> Co-authored-by: Its TLeo <134472524+ItsTLeo@users.noreply.github.com> Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Álvaro Cortés <alvarocortesdevesa@gmail.com> Co-authored-by: Álvaro Cortés Devesa <alvarocortesdevesa@Alvaros-MacBook-Pro.local> Co-authored-by: Leon Anavi <leon@anavi.org> Co-authored-by: lalalademaxiya1 <66767061+lalalademaxiya1@users.noreply.github.com> Co-authored-by: 3geek14 <nerd.of.pi@gmail.com> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: Synth and Keys <117340582+Synth-and-Keys@users.noreply.github.com> Co-authored-by: SmollChungus <38044391+SmollChungus@users.noreply.github.com> Co-authored-by: Hugh Rawlinson <hughrawlinson@users.noreply.github.com> Co-authored-by: gskygithub <106651989+gskygithub@users.noreply.github.com> Co-authored-by: gksygithub <106651989+gksygithub@users.noreply.github.com> Co-authored-by: Brian McKenna <brian@brianmckenna.org> Co-authored-by: spbgzh <72414103+spbgzh@users.noreply.github.com> Co-authored-by: jonylee@hfd <108282809+jonylee1986@users.noreply.github.com> Co-authored-by: Joy <chang.li@westberrytech.com> Co-authored-by: Joy Lee <joylee.lc@foxmail.com> Co-authored-by: HorrorTroll <sonicvipduc@gmail.com> Co-authored-by: alvicstep <alvicstep@gmail.com> Co-authored-by: mechlovin <57231893+mechlovin@users.noreply.github.com> Co-authored-by: Richard Baptist <rpbaptist@users.noreply.github.com> Co-authored-by: Richard Baptist <richard@remote.com> Co-authored-by: Andre Brait <andrebrait@gmail.com> Co-authored-by: Janat Taerakul <janat.taerakul@gmail.com> Co-authored-by: Janat Taerakul <jtaerakul@indeed.com> Co-authored-by: Yizhen Liu <62583086+edwardslau@users.noreply.github.com> Co-authored-by: Dane Lipscombe <danelipscombe@gmail.com> Co-authored-by: Wilfried JEANNIARD <willou.com@gmail.com> Co-authored-by: Joe Scotto <8194147+joe-scotto@users.noreply.github.com> Co-authored-by: Albert Y <76888457+filterpaper@users.noreply.github.com> Co-authored-by: Powered by Porridge <11315349+PoweredByPorridge@users.noreply.github.com> Co-authored-by: squigglybob <squigglybob@users.noreply.github.com> Co-authored-by: studiokestra <74369928+studiokestra@users.noreply.github.com> Co-authored-by: Pangorin <68218885+Pangorin@users.noreply.github.com> Co-authored-by: owlab2 <64054049+lizhenmingdirk@users.noreply.github.com> Co-authored-by: DUILCHOI <48977039+duilchoi@users.noreply.github.com> Co-authored-by: Controller Works <103382872+controller-works@users.noreply.github.com> Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Thomas Weißschuh <thomas@t-8ch.de> Co-authored-by: patrickxiong <patrick.xiong@gmail.com> Co-authored-by: HiryKun <1951086367@qq.com> Co-authored-by: Andy Smith <andysmithfal@users.noreply.github.com> Co-authored-by: Adam Price <komidore64@gmail.com> Co-authored-by: Laneware <68452738+Laneware@users.noreply.github.com> Co-authored-by: Lasse Luttermann <lasse.luttermann@gmail.com> Co-authored-by: Andrew Kannan <andrew.kannan@klaviyo.com> Co-authored-by: Idan Kamara <i@idank.me> Co-authored-by: Jay Greco <jayv.greco@gmail.com> Co-authored-by: Frank Ebel <git@ebel.page> Co-authored-by: ziptyze <mwcordier@gmail.com> Co-authored-by: temp4gh <temp4bbs@163.com> Co-authored-by: syc <squall_sha@163.com> Co-authored-by: Wolf Van Herreweghe <wolfvanh@gmail.com> Co-authored-by: Wolf <contact@vwolf.be> Co-authored-by: NCKiser <37519411+NCKiser@users.noreply.github.com> Co-authored-by: Vino Rodrigues <366673+vinorodrigues@users.noreply.github.com> Co-authored-by: Falco Gerritsjans <FalcoG@users.noreply.github.com> Co-authored-by: Dasky <32983009+daskygit@users.noreply.github.com> Co-authored-by: Luis Garcia <luis@bitjester.com> Co-authored-by: TreasureTypes <73436366+TreasureTypes@users.noreply.github.com> Co-authored-by: Constantine Karos <36245370+karosc@users.noreply.github.com> Co-authored-by: Yak <68242321+yakMM@users.noreply.github.com> Co-authored-by: Moritz Plattner <moritz.plattner@gmx.net> Co-authored-by: Filip Sund <filip.sund@gmail.com> Co-authored-by: Shandon Anderson <CheeseL0ver@users.noreply.github.com> Co-authored-by: ShandonCodes <shandon@shandon.codes> Co-authored-by: Deddia Permana <deddiapermana97@gmail.com> Co-authored-by: peepeetee <43021794+peepeetee@users.noreply.github.com> Co-authored-by: Dan Ford <dan-github2@dlford.co> Co-authored-by: Poring <97579443+PoringH@users.noreply.github.com> Co-authored-by: Charles Strahan <charles@cstrahan.com> Co-authored-by: dztech <moyi4681@users.noreply.github.com>
burkfers
pushed a commit
to burkfers/qmk_firmware
that referenced
this pull request
Sep 24, 2023
* Add `LAYOUT_tkl_ansi_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_ansi_wkl` [enhancement] * Add `LAYOUT_tkl_iso_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_iso_wkl` [enhancement] * Correct layout data Correct key positioning on the function row. [enhancement] * Friendly-format `info.json` [style] * Move ISO Enter to Home Row Corrects the implementation of the ISO Community Layouts. [bugfix]
thismarvin
pushed a commit
to thismarvin/qmk_firmware
that referenced
this pull request
Sep 27, 2023
* Add `LAYOUT_tkl_ansi_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_ansi_wkl` [enhancement] * Add `LAYOUT_tkl_iso_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_iso_wkl` [enhancement] * Correct layout data Correct key positioning on the function row. [enhancement] * Friendly-format `info.json` [style] * Move ISO Enter to Home Row Corrects the implementation of the ISO Community Layouts. [bugfix]
akeep
pushed a commit
to akeep/qmk_firmware
that referenced
this pull request
Oct 2, 2023
* Add `LAYOUT_tkl_ansi_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_ansi_wkl` [enhancement] * Add `LAYOUT_tkl_iso_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_iso_wkl` [enhancement] * Correct layout data Correct key positioning on the function row. [enhancement] * Friendly-format `info.json` [style] * Move ISO Enter to Home Row Corrects the implementation of the ISO Community Layouts. [bugfix]
skorpenit
pushed a commit
to skorpenit/qmk_firmware
that referenced
this pull request
Oct 3, 2023
* Add `LAYOUT_tkl_ansi_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_ansi_wkl` [enhancement] * Add `LAYOUT_tkl_iso_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_iso_wkl` [enhancement] * Correct layout data Correct key positioning on the function row. [enhancement] * Friendly-format `info.json` [style] * Move ISO Enter to Home Row Corrects the implementation of the ISO Community Layouts. [bugfix]
csolje
pushed a commit
to csolje/qmk_firmware
that referenced
this pull request
Oct 21, 2023
* Add `LAYOUT_tkl_ansi_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_ansi_wkl` [enhancement] * Add `LAYOUT_tkl_iso_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_iso_wkl` [enhancement] * Correct layout data Correct key positioning on the function row. [enhancement] * Friendly-format `info.json` [style] * Move ISO Enter to Home Row Corrects the implementation of the ISO Community Layouts. [bugfix]
BlueTufa
added a commit
to BlueTufa/qmk_firmware
that referenced
this pull request
Nov 19, 2023
* doio/kb16: Added timeout option for OLED boot logo. (#21823) * Revert "fix 60_hhkb ASCII diagram (#21813)" (#21869) This reverts commit af2d6ea128f684691432e2a209cfa11a63f77422. * CannonKeys Meetup Pad 2023 (#21806) Co-authored-by: Ryan <fauxpark@gmail.com> * [keyboard] add sweeq, a ferris/sweep variant with diodes (#21597) * Update macOS install script (#21854) * Abko AK84BT Layout Touch-Up (#21876) * [refactor] rename LAYOUT_75_ansi to LAYOUT * [enhancement] touch-up layout * AH Haven65 Community Layout support (#21880) * [refactor] rename LAYOUT to LAYOUT_65_ansi_blocker * [enhancement] enable Community Layout support * nullbitsco/snap: fix broken keymaps (#21877) * chore: ignore virtual environment directory (#20905) * Add 1upkeyboards Super16v3 (#21665) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * [keyboard] add redragon/k667 (#21417) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: syc <squall_sha@163.com> * Add M6-C Keyboard Firmware (#21852) Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Wolf <contact@vwolf.be> * Added kiserdesigns keyboard folder and Madeline keyboard (#21857) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * redragon/k667: Remove 2 layer VIA restriction (#21889) * AH Haven80 Community Layout support (#21885) * [enhancement] correct layout data * [refactor] rename LAYOUT to LAYOUT_tkl_f13_ansi_tsangan * [enhancement] enable Community Layout support * Haven80 Solder: add LAYOUT_tkl_f13_ansi_tsangan_split_bs_rshift [enhancement] * Haven80 Solder: add LAYOUT_tkl_f13_iso_tsangan_split_bs_rshift [enhancement] * Haven80 Solder: add LAYOUT_tkl_f13_iso_tsangan [enhancement] * Haven80 Solder: extend Community Layout support [enhancement] * ANAVI Macro Pad 12: rename LAYOUT to LAYOUT_ortho_4x3 (#21886) [refactor] * Chosfox CF81: correct layout data (#21902) * Auto-label data-driven efforts (#21900) * CannonKeys Bastion75 Layout Additions (#21899) * [docs] add layout/matrix diagram * [refactor] rename LAYOUT to LAYOUT_all * [enhancement] add LAYOUT_ansi_blocker_split_bs * [enhancement] add LAYOUT_ansi_blocker * [enhancement] add LAYOUT_ansi_blocker_tsangan_split_bs * [enhancement] add LAYOUT_ansi_blocker_tsangan * [enhancement] add LAYOUT_iso_blocker_split_bs * [enhancement] add LAYOUT_iso_blocker * [enhancement] add LAYOUT_iso_blocker_tsangan_split_bs * [enhancement] add LAYOUT_iso_blocker_tsangan * CannonKeys Bastion60 Layout Additions (#21887) * [bugfix] correct LAYOUT_60_iso_tsangan key order * [docs] add layout/matrix diagram * [enhancement] add LAYOUT_60_tsangan_hhkb * [enhancement] add LAYOUT_60_ansi_tsangan * [enhancement] add LAYOUT_60_iso * [enhancement] add LAYOUT_60_iso_split_bs_rshift * [enhancement] add LAYOUT_60_iso_tsangan_split_bs_rshift * [enhancement] add LAYOUT_60_hhkb * [enhancement] extend Community Layout support * CannonKeys Bastion65 Layout Additions (#21888) * [docs] add layout/matrix diagram * [refactor] rename LAYOUT to LAYOUT_all * [enhancement] add LAYOUT_65_ansi_blocker_split_bs * [enhancement] add LAYOUT_65_ansi_blocker * [enhancement] add LAYOUT_65_ansi_blocker_tsangan_split_bs * [enhancement] add LAYOUT_65_ansi_blocker_tsangan * [enhancement] add LAYOUT_65_iso_blocker_split_bs * [enhancement] add LAYOUT_65_iso_blocker * [enhancement] add LAYOUT_65_iso_blocker_tsangan_split_bs * [enhancement] add LAYOUT_65_iso_blocker_tsangan * [enhancement] enable Community Layout support * CannonKeys BastionTKL Layout Additions (#21901) * [docs] add layout/matrix diagram * [enhancement] add LAYOUT_tkl_ansi_split_bs_rshift * [enhancement] add LAYOUT_tkl_ansi_tsangan_split_bs_rshift * [enhancement] add LAYOUT_tkl_ansi_tsangan * [enhancement] add LAYOUT_tkl_f13_ansi_tsangan * [enhancement] add LAYOUT_tkl_f13_ansi_split_bs_rshift * [enhancement] add LAYOUT_tkl_f13_ansi * [enhancement] correct LAYOUT_tkl_iso key order * [enhancement] add LAYOUT_tkl_iso_split_bs_rshift * [enhancement] add LAYOUT_tkl_iso_tsangan_split_bs_rshift * [enhancement] add LAYOUT_tkl_iso_tsangan * [enhancement] add LAYOUT_tkl_f13_iso_split_bs_rshift * [enhancement] add LAYOUT_tkl_f13_iso * [enhancement] add LAYOUT_tkl_f13_iso_tsangan_split_bs_rshift * [enhancement] add LAYOUT_tkl_f13_iso_tsangan * [enhancement] extend Community Layout support * Bump actions/checkout from 3 to 4 (#21907) Bumps [actions/checkout](https://github.com/actions/checkout) from 3 to 4. - [Release notes](https://github.com/actions/checkout/releases) - [Changelog](https://github.com/actions/checkout/blob/main/CHANGELOG.md) - [Commits](https://github.com/actions/checkout/compare/v3...v4) --- updated-dependencies: - dependency-name: actions/checkout dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * GMMK2 65% ISO: Correct layout data (#21925) Correct key sizes/positioning on the right side of the board. * [Docs] Improve contrast for warnings in dark mode (#21928) * GMMK2 96% ANSI: Correct layout data (#21937) [enhancement] * Cipulot EC Theca Community Layout Support (#21913) * Alias `LAYOUT_all` as `LAYOUT_tkl_ansi` The data for `LAYOUT_all` and `LAYOUT_tkl_ansi` is identical, so alias the former to the latter to reduce redundancy. [refactor] * Rename `LAYOUT_tkl_ansi_tsangan_wkl` to `LAYOUT_tkl_ansi_wkl` [refactor] * Enable Community Layout support [enhancement] * customMK EVO70 R2 Layout Additions (#21916) * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add layout/matrix diagram [docs] * Correct layout data Reduce the gap between the encoder/macro section and the alphanumeric section by 0.25u. [enhancement] * Add `LAYOUT_ansi_blocker` [enhancement] * Add `LAYOUT_iso_blocker` [enhancement] * Fix redundant `layout_aliases` keys per dunk2k [bugfix] * [Keyboard] Add Binepad Pixie (#21524) * Add Binepad Pixie * Post waffle87 and drashna review recommendations applied * Post-drashna code review suggestions applied Co-authored-by: Drashna Jaelre <drashna@live.com> * post zvecr review --------- Co-authored-by: Drashna Jaelre <drashna@live.com> * dnworks FRLTKL Community Layout support (#21922) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_tkl_nofrow_iso_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_tsangan` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_wkl` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_tsangan` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_wkl` [enhancement] * Enable Community Layout support [enhancement] * Repair malformed links in keyboard README files (#21969) * Remove oversize binaries (#21976) This stops a situation where a user could end up flashing oversize firmware soft bricking hardware. * Drewkeys Mercury65 Layout Additions (#21924) * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add layout/matrix diagram [docs] * Correct `LAYOUT_all` data Correct the order of the Up arrow and End keys. [enhancement] * Tidy-up `info.json` formatting - add line breaks between physical rows - remove trailing spaces [style] * Add `LAYOUT_iso_blocker_split_bs` [enhancement] * Add `LAYOUT_iso_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_ansi_blocker_split_bs` [enhancement] * Add `LAYOUT_ansi_blocker_tsangan_split_bs` [enhancement] * Gray Studio Think65 v3 Layout Additions (#21930) * Add layout/matrix diagram [docs] * Format `info.json` as strict JSON [style] * Add `LAYOUT_all` [enhancement] * Refactor keymaps to use `LAYOUT_all` Refactor the `default` and `via` keymaps to use the `LAYOUT_all` macro. - change second Left Shift key to `KC_NUBS` - insert `KC_NUHS` keycode - update keycode grid alignment - remove trailing whitespace [refactor] * Rename `LAYOUT_65_blocker` to `LAYOUT_ansi_blocker` [refactor] * Rename `LAYOUT_65_iso_blocker` to `LAYOUT_iso_blocker` [refactor] * Correct `LAYOUT_iso_blocker` matrix data The Quote key was mapped as [1, 14] instead of [2, 12]. [bugfix] * Add `LAYOUT_ansi_blocker_split_bs` [enhancement] * Add `LAYOUT_ansi_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_ansi_blocker_tsangan` [enhancement] * Add `LAYOUT_iso_blocker_split_bs` [enhancement] * Add `LAYOUT_iso_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_iso_blocker_tsangan` [enhancement] * Handwired ScottoKeebs Configurator Updates (#21990) * ScottoKeebs ScottoAlp: Correct layout data [enhancement] * ScottoKeebs ScottoCMD: Correct layout data [enhancement] * ScottoKeebs ScottoErgo: Correct layout data Add hand separation and vertical stagger to the layout data. [enhancement] * ScottoKeebs ScottoFrog: Correct layout data [enhancement] * ScottoKeebs ScottoGame: Correct layout data [enhancement] * ScottoKeebs ScottoInvader: Correct layout data [enhancement] * ScottoKeebs ScottoNum: Correct layout data [enhancement] * ScottoKeebs ScottoSplit: Correct layout data [enhancement] * ScottoKeebs ScottoStarter: Correct layout data [enhancement] * Inland MK47 Community Layout Support (#21998) * Rename `LAYOUT` to `LAYOUT_planck_mit` [refactor] * Enable Community Layout support [enhancement] * Touch-up keymaps - grid-align keycodes [style] * Jaykeeb Sebelas: Standardize Layout Names (#21999) * Rename `LAYOUT_65_ansi_blocker` to `LAYOUT_ansi_blocker` [refactor] * Rename `LAYOUT_65_ansi_blocker_split_bs` to `LAYOUT_ansi_blocker_split_bs` [refactor] * Rename `LAYOUT_65_ansi_blocker_tsangan` to `LAYOUT_ansi_blocker_tsangan` [refactor] * Rename `LAYOUT_65_ansi_blocker_tsangan_split_bs` to `LAYOUT_ansi_blocker_tsangan_split_bs` [refactor] * Keebio NyquistPad Layout Updates (#22000) * Rename `LAYOUT` to `LAYOUT_ortho_5x6` [refactor] * Add `LAYOUT_ortho_5x6_1x2u` [enhancement] * Kibou Suisei Layout Addition (#22001) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_65_ansi_blocker_tsangan_wkl_split_bs` [refactor] * Add `LAYOUT_65_ansi_blocker_tsangan_wkl` [enhancement] * Kopibeng XT87 Layout Additions & Touch-Up (#22002) * Add `LAYOUT_tkl_ansi_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_ansi_wkl` [enhancement] * Add `LAYOUT_tkl_iso_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_iso_wkl` [enhancement] * Correct layout data Correct key positioning on the function row. [enhancement] * Friendly-format `info.json` [style] * Move ISO Enter to Home Row Corrects the implementation of the ISO Community Layouts. [bugfix] * Update to 'peterfalken' userspace configurations (#21836) * Krado Industries Promenade Layout Additions (#22014) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Correct key order [bugfix] * Add `LAYOUT_2x2u` [enhancement] * Add `LAYOUT_2x3u` [enhancement] * Add `LAYOUT_6u_space` [enhancement] * Add `LAYOUT_7u_space` [enhancement] * Touch-up `via` keymap Update keycode grid alignment to match the `default` keymap. [style] * Linworks Fave60a Community Layout Support (#22015) * Friendly-format `info.json` [style] * Correct layout data [chore] * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_60_tsangan_hhkb` [refactor] * Add `LAYOUT_60_ansi_tsangan` [enhancement] * Enable Community Layout support [enhancement] * Maze Studio Jocker 1800 Layout Additions (#22016) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_ansi_split_bs` [refactor] * Add `LAYOUT_ansi` [enhancement] * Add `LAYOUT_ansi_wkl_split_bs` [enhancement] * Add `LAYOUT_ansi_wkl` [enhancement] * Mechlovin Zed65 910 Layout Standardization (#22018) * Add layout/matrix diagram [docs] * Rename `LAYOUT_65_iso_tsangan_split_bs` to `LAYOUT_iso_split_bs` [refactor] * Rename `LAYOUT_65_ansi_tsangan` to `LAYOUT_ansi` [refactor] * Rename `LAYOUT_65_ansi_blocker_tsangan` to `LAYOUT_ansi_blocker_tsangan` [refactor] * Rename `LAYOUT_65_ansi_tsangan_split_bs` to `LAYOUT_all` [refactor] * Mode M256-WS Community Layout Support (#22020) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_65_ansi_blocker_split_bs` [enhancement] * Add `LAYOUT_65_ansi_blocker` [enhancement] * Add `LAYOUT_65_ansi_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_65_ansi_blocker_tsangan` [enhancement] * Add `LAYOUT_65_iso_blocker_split_bs` [enhancement] * Add `LAYOUT_65_iso_blocker` [enhancement] * patch `LAYOUT_65_iso_blocker_split_bs` * patch `LAYOUT_65_iso_blocker` * Add `LAYOUT_65_iso_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_65_iso_blocker_tsangan` [enhancement] * Enable Community Layout support [enhancement] * Mode M256-WH Community Layout Support (#22019) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_65_ansi_blocker` [refactor] * Add `LAYOUT_65_ansi_blocker_tsangan` [enhancement] * Enable Community Layout support [enhancement] * MonsGeek M1: Correct layout data (#22026) Apply vertical offset to the arrow keys. [chore] * `qmk format-json`: Add an in-place mode to format json command (#21610) * QVEX Tech Lynepad2 Layout Update (#22030) * Add layout/matrix diagram [docs] * Update layout data Update layout data to disambiguate the key/joystick/thumbpad functions in Configurator. [chore] * OwLab Jelly Evolv Solder Layout Additions (#22029) * Add layout/matrix diagram [docs] * Friendly-format `info.json` [style] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_ansi_blocker` [enhancement] * Add `LAYOUT_ansi_blocker_split_bs` [enhancement] * Add `LAYOUT_ansi_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_ansi_blocker_tsangan` [enhancement] * Add `LAYOUT_iso_blocker` [enhancement] * Add `LAYOUT_iso_blocker_split_bs` [enhancement] * Add `LAYOUT_iso_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_iso_blocker_tsangan` [enhancement] * Nix Studio Lilith Layout Additions (#22028) * Add layout/matrix diagram [docs] * Sort keys in `info.json` [style] * Add `LAYOUT_65_ansi_blocker_split_bs` [enhancement] * Add `LAYOUT_65_ansi_blocker_tsangan` [enhancement] * Add `LAYOUT_65_iso_blocker_split_bs` [enhancement] * Add `LAYOUT_65_iso_blocker_tsangan_split_bs` [enhancement] * Extend Community Layout support [enhancement] * Neson Design Nico Layout Additions (#22027) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_65_xt_ansi_blocker_split_bs` [refactor] * Add `LAYOUT_65_xt_ansi_blocker` [enhancement] * Add `LAYOUT_65_xt_ansi_blocker_tsangan` [enhancement] * Add `LAYOUT_65_xt_ansi_blocker_tsangan_split_bs` [enhancement] * Touch-up keymaps - grid-align keycodes - use four-space indent - use QMK-native keycode aliases [refactor] * Update `via` keymap Update the `via` keymaps to have the same key assignments as the `default` keymap, which is more fleshed out. [chore] * [Keyboard] Add splitkb.com's Aurora Helix (#21871) Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: Ryan <fauxpark@gmail.com> * [Keyboard] add 1upkeyboards 1upslider8 (#21546) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * [Keyboard] Adding Treasure TYPE-9 series III (#21748) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * Raindrop Layout Updates (#22032) * Add layout/matrix diagram [docs] * Rename `LAYOUT_all` to `LAYOUT_64_ansi_split_bs` [refactor] * Add `LAYOUT_60_ansi_split_bs_rshift` [enhancement] * Rico Phoenix Project No. 1 Layout Additions (#22035) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_65_ansi_rwkl_split_bs` [enhancement] * Add `LAYOUT_65_ansi_rwkl` [enhancement] * Add `LAYOUT_65_ansi_wkl_split_bs` [enhancement] * Add `LAYOUT_65_ansi_wkl` [enhancement] * Add `LAYOUT_65_iso_rwkl_split_bs` [enhancement] * Add `LAYOUT_65_iso_rwkl` [enhancement] * Add `LAYOUT_65_iso_wkl_split_bs` [enhancement] * Add `LAYOUT_65_iso_wkl` [enhancement] * RuckerMachine RM Fullsize Layout Additions (#22036) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_fullsize_108_ansi` [enhancement] * Add `LAYOUT_fullsize_108_ansi_tsangan` [enhancement] * Sho Studios ARC Layout Addition (#22037) * Add layout/matrix diagram [docs] * Format `info.json` Apply four-space indent. [style] * Add `LAYOUT_ansi_split_bs` [enhancement] * Move Digitizer to "Software Features" (#22031) * Add missing gpio and chibios defs to uart.h (#22033) * Fix paragon encoder pinout for soldered version (#22043) * geistmaschine/macropod: fix issues waking up after suspend on apple devices (#22023) * Add all RGB Matrix Animations to city42 (#21992) * Viktus Styrka Topre Layout Standardization and Touch-Up (#22044) * Add layout/matrix diagram [docs] * Alias `LAYOUT_all` to `LAYOUT_split_6u` `LAYOUT_all` and `LAYOUT_split_6u` represent the same matrix positions and sequence, so implement the former as an alias. [refactor] * Touch-up keymaps - grid-align keycodes - use QMK-native keycode aliases [chore] * Friendly-format `info.json` [style] * Correct layout data Correct key sizes/positioning on the bottom row. [chore] * Rename `LAYOUT_2u_6u` to `LAYOUT_65_xt_ansi_blocker` [refactor] * Rename `LAYOUT_2u_7u` to `LAYOUT_65_xt_ansi_blocker_tsangan` [refactor] * Rename `LAYOUT_split_6u` to `LAYOUT_65_xt_ansi_blocker_split_bs` [refactor] * Rename `LAYOUT_split_7u` to `LAYOUT_65_xt_ansi_blocker_tsangan_split_bs` [refactor] * Wolf Neely65 Touch-Up (#22045) * Add layout/matrix diagram [docs] * Friendly-format `info.json` [style] * Touch-up keymaps - grid-align keycodes - use QMK-native keycode aliases [refactor] * Fix keymaps Fix keycodes being assigned out of order with respect to `info.json`. - move XT function keys to left side - move keycodes for position [2, 14] from Home Row to Number Row [bugfix] * Rename `LAYOUT` to `LAYOUT_65_xt_ansi_blocker_tsangan_wkl_split_bs` [refactor] * Add `LAYOUT_65_xt_ansi_blocker_tsangan_wkl` [enhancement] * Wolf Silhouette Community Layout Support (#22052) * Add layout/matrix diagram [docs] * Friendly-format `info.json` [style] * Touch-up layout data Move the ISO Hash key to the main key area. [chore] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_tkl_nofrow_ansi_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_tsangan` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_wkl` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_tsangan` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_wkl` [enhancement] * Enable Community Layout support [enhancement] * Wolf Ziggurat Layout Additions (#22053) * Add layout/matrix diagram [docs] * Friendly-format `info.json` [style] * Touch-up layout data Move the ISO Hash key to the main key area. [chore] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_65_xt_ansi_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_65_xt_ansi_blocker_tsangan` [enhancement] * Add `LAYOUT_65_xt_iso_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_65_xt_iso_blocker_tsangan` [enhancement] * Adding support for the Pteron56 (PCB) keyboard (#21731) * Add missing gpio include to ps2 vendor (#22063) * [Keyboard] Add riot pad (#22060) Co-authored-by: ShandonCodes <shandon@shandon.codes> * DZTech Pluto Community Layout support (#22069) * Add layout/matrix diagram [docs] * Friendly-format `info.json` - apply four-space indent - sort JSON keys in layout objects [style] * Correct `LAYOUT_all` data Correct key sizes/positions of: - ANSI Backslash [1, 13] - ANSI Enter [1, 14] - Fn [3, 13] [chore] * Correct `LAYOUT_iso` data Correct position of Fn key [3, 13]. [chore] * Add `LAYOUT_tkl_nofrow_ansi_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_tsangan` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_wkl` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_tsangan` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_wkl` [enhancement] * Enable Community Layout support [enhancement] * Touch-up keymaps Update keycode grid alignment. [style] * Ubest VN Community Layout Support (#22070) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_65_ansi_split_bs` [enhancement] * Add `LAYOUT_65_ansi` [enhancement] * Add `LAYOUT_65_iso_split_bs` [enhancement] * Add `LAYOUT_65_iso` [enhancement] * Enable Community Layout support [enhancement] * Touch-up keymaps - apply four-space indent - grid-align keycodes [style] * Add OLED logo DP3000 macropad (#21936) * SapuSeven MacroPad12: rename LAYOUT to LAYOUT_ortho_3x4 (#22081) * Alchemist Keyboards OGRN Layout Addition (#22080) * Add layout/matrix diagram [docs] * Friendly-format `info.json` [style] * Add `LAYOUT_ortho_5x4` [enhancement] * Touch-up keymaps - update grid-alignment (layer-to-layer consistency) - fix box drawings [style] * Extend Community Layout support Add `ortho_5x4` to supported Community Layouts. [enhancement] * amend 96_(ansi|iso) community_layouts in keyboards/ (#22066) * Restrict "feature" and "animation" keys (#21895) * [Keyboard] Momokai Aurora (#20419) Co-authored-by: Albert Y <76888457+filterpaper@users.noreply.github.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Joel Challis <git@zvecr.com> * [Keyboard] add Quokka keyboard (#20979) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * apply 66_(ansi|iso) to keyboards (#21834) * Add ScottoSlant Keyboard (#20942) Co-authored-by: Ryan <fauxpark@gmail.com> * Add ScottoMouse Handwired Macropad (#21074) Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Albert Y <76888457+filterpaper@users.noreply.github.com> * Add ScottoFly Keyboard (#20939) Co-authored-by: Ryan <fauxpark@gmail.com> * Add ScottoMacrodeck Macropad (#20946) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * Add ScottoLong Keyboard (#20938) Co-authored-by: Ryan <fauxpark@gmail.com> * Add funtions of Encoder and VIA for redragon/k667 (#21917) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: syc <squall_sha@163.com> * [Keyboard] Add rpk-001 keyboard (#21042) Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: Joy <chang.li@westberrytech.com> * amend 68_(ansi|iso) community_layouts in keyboards/ (#21835) * [Keyboard] Add QCK-75 (#21180) Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Quarkeys Studio Z67 Solder Community Layout Support (#22095) * Quarkeys Studio Z67 Hotswap Community Layout Support (#22096) * kimiko: mirror encoder pins between halves (#21728) * Keychron q9 plus (#21399) Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * add dz60v2 keyboard (#21862) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * add odinmini layout (#21983) Co-authored-by: Ryan <fauxpark@gmail.com> * keymaps: Fix hacker_dvorak build. (#22102) * Allow for `qmk compile -kb all`. (#22022) * Royal Kludge RK G68 Community Layout Support (#22103) * Rename `LAYOUT` to `LAYOUT_65_ansi` [refactor] * Enable Community Layout support [enhancement] * Touch-up keymaps - fix keycode grid alignment [style] * Touch-up readme - link to maintainer's GitHub profile - specify codebase is for RGB version of RK G68 - update Hardware Availability links [docs] * Added OLED SSD1306 128x64 to the verified working table (#22112) * Shoc: physically arrange keymaps/layout macro (#22100) * Fix up `qmk mass-compile` makefile indenting. (#22115) * Add 'dactyl_tracer' keyboard (#20993) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * add subrezon/lancer keyboard (#20792) Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Daniel Osipishin <danielos@retarus.de> * [Keyboard] Add SIRIND Klein (#21951) Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: jack <0x6a73@protonmail.com> * GMMK2 96% ISO: Correct layout data (#22101) * Add reminder about format-json to PR Checklist (#22055) * Add Jank RP2040 Dactyl (#21973) Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * [Keyboard] Enable RGB_TEST animation on riot_pad (#22118) Co-authored-by: ShandonCodes <shandon@shandon.codes> * YMDK Melody96 Matrix Touch-Up (#22113) * Correct layout/matrix diagram Correct swapped designations for ANSI Backslash and ANSI Enter keys. [docs] * Correct matrix data Correct the matrix data for: - `LAYOUT_all` - `LAYOUT_96_ansi` - `LAYOUT_96_ansi_splitbs` which all had the matrix positions for ANSI Backslash and ANSI Enter swapped. [bugfix] * Implement `LAYOUT_hotswap` directly Implement `LAYOUT_hotswap` as its own layout, instead of aliasing it to `LAYOUT_96_ansi`. [bugfix] * Specify primary support for Soldered PCBs Current version of codebase primarily supports Soldered PCBs. [enhancement] [docs] * Update feature_rgblight.md (#21483) * Revert "Update feature_rgblight.md" (#22132) * included keyboard.h. To use is_keyboard_master with a split with an i… (#21571) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: tokky <tokky@localhost-live.attlocal.net> * Added Wyvern Hotswap by BredWorks (#21141) Co-authored-by: Neil Brian Ramirez <nightlykeyboards@gmail.com> Co-authored-by: Neil Brian Ramirez <nightlyboards@gmail.com> * Fix combo_ref_from_layer respect different default layer [#21780] (#21781) * Fix variable misspelling (#21774) * amend split_* community_layouts in keyboards (#21847) * amend 75_(ansi|iso) community_layouts in keyboards/ (#21837) * Add is0gr to QMK (#22024) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> * Document the RP2040-specific PS/2 implementation (#22079) Co-authored-by: Dasky <32983009+daskygit@users.noreply.github.com> * Bump tj-actions/changed-files from 38 to 39 (#21923) Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Add Palmetto PCB (#21955) * Add zoom98 (#22062) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Joel Challis <git@zvecr.com> * Added more rgb effects for rpk-001 keyboard (#22120) * Fix typo in oled_driver (#22134) betwen -> between * Fix entry into bootloader for STM32G431. (#22138) * Fix doc for programmable buttons. (#22136) Co-authored-by: Yanfei Guo <yguo@anl.gov> * rastersoft/minitkl layout corrections (#22130) * [Keyboard] Add spankbd, 3x5+3 split keyboard (#22003) * Initial support for CSTM80 (#22137) * Add support for YMD75 V4 - ISO (#22128) * Drop V2 production updates (#22147) * Allow inline generation of compile_commands.json while doing a `qmk compile`, using `--compiledb` (#21549) * Allow for `qmk mass-compile all:<keymap>` (#22116) Co-authored-by: Joel Challis <git@zvecr.com> * HnahKB Freyr Layout Additions (#22150) * Add layout/matrix diagram [docs] * Add `LAYOUT_tkl_ansi_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_ansi_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_ansi_tsangan` [enhancement] * Add `LAYOUT_tkl_ansi_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_ansi_wkl` [enhancement] * Add `LAYOUT_tkl_iso_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_iso_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_iso_tsangan` [enhancement] * Add `LAYOUT_tkl_iso_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_iso_wkl` [enhancement] * Extend Community Layout support Add as supported layouts: - `tkl_ansi_split_bs_rshift` - `tkl_ansi_tsangan` - `tkl_ansi_tsangan_split_bs_rshift` - `tkl_iso_split_bs_rshift` - `tkl_iso_tsangan` - `tkl_iso_tsangan_split_bs_rshift` [enhancement] * Rura66 Layout Data (#22155) * Friendly-format `info.json` [style] * Update layout data - separate keyboard halves - add vertical stagger [refactor] * add linworks fave60 (#20796) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Add KB12 keyboard (#21605) Co-authored-by: Pablo Martínez <58857054+elpekenin@users.noreply.github.com> Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * 4pplet Eagle/Viper Rep Rev.A Layout Additions II (#22161) * teleport/native: switch from wrongly used user to kb function, boost matrix scan rate (#21172) * enable LTO * change from _user to _kb function * switch matrix io delay to nops, add opt=3 for higher scan rates * disable console which was enabled for testing but collides with endpoint used by VIA * switched from opt=3 to opt=2 * Update keyboards/teleport/native/native.c Co-authored-by: Joel Challis <git@zvecr.com> * slightly upped debounce, as some testers had chatter with async + default debounce --------- Co-authored-by: Joel Challis <git@zvecr.com> * Add Brutalv2 60 Keyboard (#22094) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * keyboards: Add support for Sofle Choc (#16736) Co-developed-by: Brian Low <github@brianlow.com> Co-developed-by: duese <duese@users.noreply.github.com> Co-authored-by: Thomas Weißschuh <thomas@t-8ch.de> * Remove rosetta instructions for Apple Silicon (#22174) * Bastard Keyboards: Add support for Dilemma Max (4x6_4) (#22064) * tentatively add dilemma 4x6_4 WIP untested PR by Casuanoob. Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * Miscellaneous fixes for recently merged keyboards (#22179) * Add Soulstone keyboard (#22093) * [Keyboard] Add SyenaKeyboards (#22168) Co-authored-by: Syenasweta <syenasweta@gmail.com> * Fix minimum python version references (#22191) * Added /handwired/ziyoulang_k3_mod (#21965) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * Add the Split67 keyboard PCB (#22107) Co-authored-by: “yuezp” <“yuezpchn@126.com”> * Monstargear XO87 Soldered: correct layout data (#22199) Correct key positions on the bottom row for `LAYOUT_tkl_ansi_tsangan`. [chore] * Add Acheron Themis and its variants (#22142) Co-authored-by: Drashna Jaelre <drashna@live.com> * Add keyboard Projectd/75/Projectd_75_ansi (#21628) Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: gksygithub <106651989+gksygithub@users.noreply.github.com> * [Keyboard] Add SP-111 v2 keyboard (#21652) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> * [Keyboard] Add qwertyqop60hs (#22164) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Added 3dp660 oled keyboard (#20591) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: xia0 <xiao@morgan.net.au> * Add Wave keyboard (#22054) Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * Add Keychron Q1 Version 2 (#20416) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: adophoxia <100170946+adophoxia@users.noreply.github.com> Co-authored-by: Adophoxia <andyao1528@gmail.com> * Add Line TKL keyboard (#22172) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Add printedpad keyboard (#21202) Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * Add `qmk ci-validate-aliases` (#22205) * Move orphaned Yugo-M files (#22211) Moves files that were left behind by #14996. [bugfix] * Klein_HS PCB support (#22203) * Update vid for printedpad (#22215) * Adding BriianPowell Discipline Keyboard Layout Updates (#21474) * Flag vial keymaps in 'qmk lint' (#22227) * Fix build error when Automatic Mouse Layer is enabled (#22229) * [Keyboard] vinhcatba/uncertainty (#21142) * vinh: test fw for uncertainty (deprecated) * v0.1: update base firmware with 2 layers, use bongo cat animation for oled * v0.1: change directory * v0.1: cleanup * v0.2: update layers * v0.3: add VIA support * v0.3: add VIA support (continue) * vinh: test fw for uncertainty (deprecated) * v0.1: update base firmware with 2 layers, use bongo cat animation for oled * v0.1: change directory * v0.1: cleanup * v0.2: update layers * v0.3: add VIA support * v0.3: add VIA support (continue) * v0.3: change keyboard name, remove eeprom config save in VIA keymap * cleanup for PR * update readme * vinh: test fw for uncertainty (deprecated) * v0.1: update base firmware with 2 layers, use bongo cat animation for oled * v0.1: change directory * v0.1: cleanup * v0.2: update layers * v0.3: add VIA support * v0.3: add VIA support (continue) * vinh: test fw for uncertainty (deprecated) * v0.1: update base firmware with 2 layers, use bongo cat animation for oled * v0.1: change directory * v0.1: cleanup * v0.3: change keyboard name, remove eeprom config save in VIA keymap * cleanup for PR * update readme * add license to header files, update ws2812 driver and DI_PIN to info.json * resovle PR suggestion for config.h, halconf.h, mcuconf.h * update info.json regarding PR comment * update bongo.h regarding PR comment * add oled mode toggle * update readme.md, rules.mk regarding PR comment * add submodule update * move oled handle to keyboard level * Update keyboards/vinhcatba/uncertainty/uncertainty.c forgot user-level proces_record * now using bongo as source file * Apply suggestions from code review remove default value codes * move WPM_ENABLE and ENCODER_MAP_ENABLE to keymap level * Apply suggestions from code review * Apply suggestions from code review * Update keyboards/vinhcatba/uncertainty/config.h * [Keyboard] Split-Cloud Handwired (#21327) * Added new handwired, the Split-Cloud * Minor changes to make clang-format happy * Alligned files with project standard. Trimmed midi out of the default layout, modified the readme, and removed unnecessary files. * Simplified default keymap further, changes to info.json * Moved image to imgur, simplified, and removed the unneeded rules.mk file * Update keyboards/handwired/split_cloud/readme.md Changed image in readme to Huge Thumbnail instead of Original. * Removed unneeded tri layer custom keycodes Now using the built-in functionality! * Update keyboards/handwired/split_cloud/readme.md Accidentally reverted this when making other changes * Fix typo in `docs/feature_tri_layer.md` (#22232) `Stes` -> `Sets` * [Keyboard] HorrorTroll Nyx (#21143) * Added support keyboard Nyx * Resolved zvarc suggested and lint error * Delete FORCE_NKRO due to problem with BIOS on mainboard * Resolved dunk2k suggested and limit more brightness, disable some RGB Effect * Resolved drashna suggested * Delete flower blooming effect and move to rev1 folder * Yampad add missing includes for CONVERT_TO (#22237) * Yampad add missing includes for CONVERT_TO (#22237) * Fix old usage of UNICODE_MODE_MAC (#22238) * [Keyboard] Add MIIIW BlackIO83 (#21970) * Add MIIIW BlackIO83 * Improve the code * Updated instructions for entering the bootloader * Update keyboards/miiiw/blackio83/rev_0100/config.h * Update keyboards/miiiw/blackio83/rev_0100/config.h * Update keyboards/miiiw/blackio83/config.h * Update config.h * [Keyboard] MonsGeek M3 (#20542) * Add keybord monsgeek m3. * Add keybord monsgeek m3. * Add keybord monsgeek m3. * updata rules.mk * add readme.md * delete monsgeek\m3\rgb_matrix_kb.inc * add DISABLE_M3_KEYCODES * user_config --> kb_config * Move code to info.json,and removed redundant features * Update keyboards/monsgeek/m3/info.json * Update keyboards/monsgeek/m3/info.json * Update readme.md * Update keyboards/monsgeek/m3/config.h * Update keyboards/monsgeek/m3/info.json * Update keyboards/monsgeek/m3/info.json * Update keyboards/monsgeek/m3/keymaps/default/keymap.c * Update keyboards/monsgeek/m3/keymaps/via/keymap.c * Update keyboards/monsgeek/m3/readme.md * Update m3.c * Update m3.c * Update info.json * Update keymap.c * Update keymap.c * Update config.h * Update keyboards/monsgeek/m3/readme.md * Update keyboards/monsgeek/m3/rules.mk * Update keyboards/monsgeek/m3/info.json * Update keyboards/monsgeek/m3/keymaps/default/keymap.c * Update keyboards/monsgeek/m3/keymaps/via/keymap.c * Update keyboards/monsgeek/m3/info.json * Update keyboards/monsgeek/m3/info.json * Update keyboards/monsgeek/m3/info.json * Update m3.c * Update keyboards/monsgeek/m3/info.json * Update keyboards/monsgeek/m3/m3.c * Update keymap.c replace the tabs with spaces * Update keymap.c replace the tabs with spaces * add missing gpio include for pointing motion pin (#22246) * [Keyboard] Hineybush H101 (#22186) * initial h101 commit * update keymap and add via support * update doc stuff * readme typo * updates * add indicator LEDs, needs testing * update readme * update USB VID/PID to match VIA json * Update keyboards/hineybush/h101/readme.md * Update keyboards/hineybush/h101/keymaps/default/keymap.c * Update keyboards/hineybush/h101/readme.md * Update keyboards/hineybush/h101/keymaps/via/keymap.c * updates from PR comments * updates per PR comments * idk why the folder is acting weird * maybe this will fix it * update to hopefully fix everything weird * keycode fixes * keymap updates * add 60_(ansi|iso)_wkl* community layouts (#21811) * add 60_(ansi|iso)_tsangan_wkl* layouts * Update keymap.c * `tsangan_wkl` to `wkl` * update info.json * split backspace changes * Apply suggestions from code review * Keyboard change blu/vimclutch to hardware revision B. (#22247) Co-authored-by: Ryan <fauxpark@gmail.com> * Add Ratio60 PCB (#21609) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: 4pplet <4pplet@protonmail.com> Co-authored-by: 4pplet <stefan.ess@gmail.com> * Add 62 key Dactyl Manuform (#21394) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Add `60_iso_tsangan_split_bs_rshift` Community Layout (#21812) * add 60_(ansi|iso)_tsangan_split_bs_shift layouts * shift to rshift * remove 60_ansi_tsangan_split_bs_rshift * Update layouts/default/60_iso_tsangan_split_bs_rshift/info.json * Kisakey (#22217) Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Ryan <fauxpark@gmail.com> * Reword mention of personal keymaps from PR checklist (#22258) * Add support for CSTC40 keyboard (#22154) Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: lesshonor and waffle87 Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: lesshonor Co-authored-by: itsvar <120035196+itsvar8@users.noreply.github.com> * [Keyboard] Add support for EnviousDesign keyboards (#17544) * Add support for Envious.Design Keyboards Add various RP2040 keyboards I've designed. * Fixed missing newlines at EOF. * Ran CLANG-FORMAT and sorted out any potential issues. * Gave keyboards all unique product IDs * Made requested changes. * removed all VIAL related code * sorted out license on all *.h or *.h files * removed outdated RESET Keycode * missed some VIAL bits * Made suggested changes * Made Suggested Changes * missed one file to change. * Attempted fix of CI issues * Update .gitmodules * Revert "Update .gitmodules" This reverts commit f4bace51621ed0c5bd40c729fa1c6339f665f0b7. * hopefully fixed all CI and QMK lint issues * resolve more CI errors and a couple typos * fixed last remaining issue as of now * made requested changes * further more on suggested change * Delete README.md * derpy workaround to change case of readme * finished up 65M firmware via does not work, I will investigate another time. * re-did a lot of 65M firmware bits, also fixed via for this board * corrected mistake in firmware * made suggested change to info.json for 65m/60F * finished 65M non via keymap and re-sorted via keymap * Update keyboards/enviousdesign/tkl/rgb/keymaps/default/keymap.c * Update keyboards/enviousdesign/tkl/rgb/keymaps/default/keymap.c * Apply suggestions from code review Verified updated Info.json works for aforementioned keyboards, * Follow-up commit with aforementioned suggested changes * Apply suggestions from code review correction to a couple typos pointed out. * follow-up removed some un-needed Readmes and corrected a mistake in 60F via keymap * Apply suggestions from code review * Added images of PCB to each Keyboard README * Apply suggestions from code review * Update keyboards/enviousdesign/60f/readme.md * Added missing aspects of info.json and corrected RGB_DI_PIN to WS2812_DI_PIN in RGB keyboard * made requested changes * Update config.h * used QMK migrate to update info.json * Apply suggestions from code review * Update keyboards/enviousdesign/65m/info.json * renamed named keyboards as suggested and added commission keyboard to repo * renamed file to hopefully please lint * renamed things to be all lower case since lint doesn't appear to look for upper case * updated keymap.c and removed unnecessary file * fixed readme and a couple other bits * converted various aspects to json information * attempt fix for lint error * fix some issues I overlooked * Apply suggestions from code review * moved some folders about as suggested * Made suggested changes * Apply suggestions from code review * removed outdated config.h * fixed errors in 65M and mini1800 * Apply suggestions from code review * Update keyboards/enviousdesign/delirium/rev1/info.json * Update keyboards/enviousdesign/65m/info.json * Apply suggestions from code review * [Keyboard] Inland V83P (#21725) * [Keyboard]add v83p keyboard. * Update keymap.c * Update keyboards/inland/v83p/keymaps/via/keymap.c * Update keyboards/inland/v83p/keymaps/default/keymap.c * Update keyboards/inland/v83p/config.h * Update keyboards/inland/v83p/info.json * Update info.json * Update keymap.c * Update keyboards/inland/v83p/mcuconf.h * Update keyboards/inland/v83p/halconf.h * Update keyboards/inland/v83p/info.json * Update keyboards/inland/v83p/v83p.c * Update keymap.c replace the tabs with spaces * Update keymap.c replace the tabs with spaces * Update keyboards/inland/v83p/info.json * [Keyboard] RPNeko65 by lendunistus (#21747) * initialise rpneko65, info.json * force NKRO * define WS2812 stuff and capitalise RPNeko65 * use RGBlight, add ANSI to keymap.c also remove _ADC suffixes from pins * basic readme plus making it so the info.json RGB values are actually recognised as integers * update repository URL * fix info.json formatting * caps lock LED implementation "borrowed" from waffling60 * put RGBLIGHT_ENABLE in json also remove "pin" from the rgblight option * add actually correct keymaps also reformat info.json * move to designer folder, add image to README * move keyboard to separate revision folder and remove erroneous tag from config.h * remove brightness/hue/saturation steps * change device version to 1.0 * move quantum.h include to top * actually, let's try a new image I also forgot to save the info.json file beforehand oops * Remove comma in info.json * Community layouts in info.json * Delete rpneko65/readme.md * Apply suggested changes to readme * Suggested code changes * Suggested imgur link * rename code file this was the issue all along sigh * Correct layer matching this time * Move Enter in info.json * README/info.json change * Another batch of suggestions * amend alice* community_layouts in keyboards (#21846) * add alice* to keyboards * add seigaiha * additions * Update info.json * revert wanderland * add tgr/alice * add matrix diagram.md * [Keyboard] Add Okayu (#22077) Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * Enable encoder map on navpad1.0 (#22266) * [Keyboard] jukaie/jk01 (#20573) * ADD Keyboard * Resolved requested changes * update keymap.c file * resolved requested changes * updated info.json file * Updated requested changes * Delete JK01.h file * Resolved requested changes * Delete readme.md * add rules.mk to default folder * Upload default/keymap.c * Add via/keymap.c * Updated info.Json file * Change VID in info.json * Resolved requested changes * Resolved requested changes. * Resolved requested changes * Updated changes --------- Co-authored-by: gksygithub <gskyGit@gsky.com.tw> * Fix typo in keychron v6 encoder map enable (#22272) * Allow for disabling of parallel processing of qmk find and `qmk mass-compile`. (#22160) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Fixup symbol sizing listing. (#22307) * [Keyboard] Add purin (#22306) * [Keyboard] Add QK100 (#21782) Co-authored-by: Drashna Jaelre <drashna@live.com> * Remove extra led_matrix_indicators_user call (#22329) * [Keyboard] Add LGBTKL (#22331) Co-authored-by: jack <0x6a73@protonmail.com> * Clarify PIO define is optional in docs. (#22339) * [Keyboard] Add Kaly42 (#22282) * Added Kaly/Kaly42 keyboard's minimal files. * Updated readme.md; New link and improved description text. * Apply suggestions from code review Added all suggestions given by @dunk2k Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Added community_layouts to info.json. Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> --------- Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * [Keyboard] add pisces pcb (#22334) * [Keyboard] Waffling60 Rev E ANSI Hotswap (#22270) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Add darkproject/kd87a_bfg_edition keyboard (#18981) Co-authored-by: gksygithub <106651989+gksygithub@users.noreply.github.com> * eason/aeroboard - Modify bootloader (#22286) * [Keyboard] doksin (#22220) * [Keyboard] Add Velvet hotswap & solder (#22284) * Flag more VIAL config options in lint (#22345) * Removed clueboard link as the website has been parked for some time (#22290) * [Keyboard] add enter67 keyboard (#22346) Co-authored-by: “yuezp” <“yuezpchn@126.com”> * Fix for swapped PID and VID (#22372) * Add Kindakeyboards Conone65 Via support (#22320) * [Keyboard] Add TeaQueen (#22352) Co-authored-by: jack <0x6a73@protonmail.com> * [Keyboard] Add Klein_SD (#22371) Co-authored-by: Joel Challis <git@zvecr.com> * boardsource/unicorne - Fixed OLED layers being all set to zero (#22389) * docs(rgblight): fix typos (#22399) * Teaqueen: correct layout data (#22406) * [Keyboard] Add Piantor Pro (#22361) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> * Red Herring PCB support (#22409) Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: jack <0x6a73@protonmail.com> * Add riblee handwired split keyboard (#22277) * [Keyboard] Add Duet Switch Tester (#22367) Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * [Keyboard] Add PCB Utopia88 (#22257) * Fix Herringbone pro Layouts (#22317) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Add iso85k keyboard (#22411) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Fix corne keylog (#22420) * [Keyboard] Fix bug in set_keylog function Fixes issue where some keys would not trigger the oled to output the row and column of a pressed key (would happen with LT(...) for my keymap) * [Keyboard] Tiny improvement to oled_render_keylog for crkbd Added improvement suggestion I got for another keyboard * Fix indicator LED definition for Sofle RGB. (#22408) * Update layer state of Lily58 from 'Default' to 'Base' (#22397) * Add SNES Macropad keyboard (#22377) Co-authored-by: jack <0x6a73@protonmail.com> * Update gregandcin/teaqueen (#22402) * [Keyboard] Add alpaca/wfeclipse (#22230) Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * Add Ploopy Madromys mouse (#21989) Added PloopyCo madromys/adept mouse Co-authored-by: Drashna Jaelre <drashna@live.com> * [Keyboard] Add MariOrion v2.5 (#22273) * Pushed MariOrion v2.5 to the branch. Prod and proto version added. * Pushed MariOrion v2.5 to the branch. Prod and proto version added. * Proper addition of layout options Addition of split bs rshift tsangan layout options. Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Merge branch 'toril940mariorion_v25' of github.com:toril940/qmk_firmware into toril940mariorion_v25 * Merge branch 'toril940mariorion_v25' of github.com:toril940/qmk_firmware into toril940mariorion_v25 * Update keyboards/mariorion_v25/proto/keymaps/via/keymap.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/proto/keymaps/default/keymap.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Updated readme.md with more information regarding make commands, and proto vs prod. * Update keyboards/mariorion_v25/prod/keymaps/via/keymap.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/prod/keymaps/default/keymap.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/prod/info.json Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Amended some changes to info.json - community layouts changed from scope to array. * Update keyboards/mariorion_v25/readme.md Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Revert keyboards/gray_studio/think65/solder/solder.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Revert keyboards/gray_studio/think65/solder/solder.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Revert keyboards/gray_studio/think65/solder/solder.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Removed via.json from the via keymaps. Replaced with matrix_diagram.md. via.json file moved off to [public mariorion_v25 repo](https://github.com/toril940/orion-v25) * Revert keyboards/gray_studio/think65/solder/solder.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Removed via.json from the via keymaps. Replaced with matrix_diagram.md. via.json file moved off to [public mariorion_v25 repo](https://github.com/toril940/orion-v25) * Update keyboards/mariorion_v25/proto/info.json Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/rules.mk Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/proto/info.json Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/proto/info.json Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/proto/info.json Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/prod/info.json Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/prod/info.json Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/prod/info.json Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/prod/info.json Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Revert keyboards/gray_studio/think65/solder/solder.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/matrix_diagram.md Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/readme.md Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/readme.md Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/readme.md Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/readme.md Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/readme.md Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/proto/mariorion_v25.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/prod/mariorion_v25.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Pushed new info.json and keymap.c files. * Pushed new info.json and keymap.c files. * Fixes to LED driver wrt PWM definitions with STM. * Update keyboards/mariorion_v25/prod/keymaps/via/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/prod/keymaps/via/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/prod/info.json Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/prod/mariorion_v25.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/proto/info.json Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/proto/config.h Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/proto/mariorion_v25.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/proto/mariorion_v25.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/proto/keymaps/via/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/proto/keymaps/via/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Committing a details update to readme.md. * Committing a details update to readme.md. * Update keyboards/mariorion_v25/prod/config.h Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/prod/mariorion_v25.c Co-authored-by: Ryan <fauxpark@gmail.com> * Revert "Committing a details update to readme.md." This reverts commit 068a82a1fcf1996d87f7f97a10e9f5fbbee79a29. * Committing a details update to readme.md. * Update keyboards/mariorion_v25/halconf.h Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/mcuconf.h Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/prod/config.h Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/proto/config.h Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/halconf.h Co-authored-by: Ryan <fauxpark@gmail.com> * Production pictures replacing the standard ones in the readme.md :) * waffle87 requests bundled: - Licence headers added - Codeblocked matrix_diagram.md - Consolidated files where possible - Removed excess from config.h --------- Co-authored-by: toril940 <anastasialucas940@hotmail.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: Ryan <fauxpark@gmail.com> * Add `qmk license-check` developer-level CLI command. (#22075) * add 5087 keyboard (#20557) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * studiokestra/line_tkl: correct layout data (#22455) * fix `layouts` data * add EoF * [Keyboard] Fixes to make snes_macropad play nicer with qmk configurator (#22432) * [Keyboard] Change default implementation for get_layer_name_user Will now show the layer number instead of "Unknown", since this is what will be shown if QMK Configurator is used to compile the firmware. * [Keyboard] Update the layout info This makes it look sort of like a macropad + gamepad rather than an 4x6 ortholinear keyboard. * [Keyboard] Fix default implementation of get_layer_name_user Based on feedback from code review the implementation was swapped in favor of using get_u8_str. This implied a change to the argument type from int to uint8_t, which cascaded into the existing keymaps. (This made sense in general, since the return type of get_highest_layer is also a uint8_t.) * add `68_ansi` Community Layout to nebula68b (#22433) * Fix typos: key-modifer→key-modifier and interacton→interaction (#22464) * Bs equals (#21690) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: jack <0x6A73@pm.me> * Update stale.yml (#22473) * Update stale.yml * [Keyboard] Add Eden (#22467) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Add leonardo build target for leonardo + usb2.0 shield based projects (#22243) * [Keyboard] Add dnworks 997pt3 (#22466) Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * [Doc] Improve converter references (#21801) * reset master to upstream (#35) * Update 1up keymaps (#36) * Fix IJ debugger shortcut (#37) --------- Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: Lasse Luttermann <lasse.luttermann@gmail.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Andrew Kannan <andrew.kannan@klaviyo.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Idan Kamara <i@idank.me> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: Jay Greco <jayv.greco@gmail.com> Co-authored-by: Frank Ebel <git@ebel.page> Co-authored-by: ziptyze <mwcordier@gmail.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: temp4gh <temp4bbs@163.com> Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: syc <squall_sha@163.com> Co-authored-by: Wolf Van Herreweghe <wolfvanh@gmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Wolf <contact@vwolf.be> Co-authored-by: NCKiser <37519411+NCKiser@users.noreply.github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: 3geek14 <nerd.of.pi@gmail.com> Co-authored-by: Vino Rodrigues <366673+vinorodrigues@users.noreply.github.com> Co-authored-by: Falco Gerritsjans <FalcoG@users.noreply.github.com> Co-authored-by: Dasky <32983009+daskygit@users.noreply.github.com> Co-authored-by: Luis Garcia <luis@bitjester.com> Co-authored-by: harveysch <126267034+harveysch@users.noreply.github.com> Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: TreasureTypes <73436366+TreasureTypes@users.noreply.github.com> Co-authored-by: Constantine Karos <36245370+karosc@users.noreply.github.com> Co-authored-by: Yak <68242321+yakMM@users.noreply.github.com> Co-authored-by: Moritz Plattner <moritz.plattner@gmx.net> Co-authored-by: Controller Works <103382872+controller-works@users.noreply.github.com> Co-authored-by: Filip Sund <filip.sund@gmail.com> Co-authored-by: Shandon Anderson <CheeseL0ver@users.noreply.github.com> Co-authored-by: ShandonCodes <shandon@shandon.codes> Co-authored-by: Deddia Permana <deddiapermana97@gmail.com> Co-authored-by: peepeetee <43021794+peepeetee@users.noreply.github.com> Co-authored-by: Albert Y <76888457+filterpaper@users.noreply.github.com> Co-authored-by: Dan Ford <dan-github2@dlford.co> Co-authored-by: Joe Scotto <8194147+joe-scotto@users.noreply.github.com> Co-authored-by: Joy Lee <joylee.lc@foxmail.com> Co-authored-by: Joy <chang.li@westberrytech.com> Co-authored-by: Poring <97579443+PoringH@users.noreply.github.com> Co-authored-by: Charles Strahan <charles@cstrahan.com> Co-authored-by: lalalademaxiya1 <66767061+lalalademaxiya1@users.noreply.github.com> Co-authored-by: dztech <moyi4681@users.noreply.github.com> …
christrotter
pushed a commit
to christrotter/qmk_firmware
that referenced
this pull request
Nov 28, 2023
* Add `LAYOUT_tkl_ansi_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_ansi_wkl` [enhancement] * Add `LAYOUT_tkl_iso_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_iso_wkl` [enhancement] * Correct layout data Correct key positioning on the function row. [enhancement] * Friendly-format `info.json` [style] * Move ISO Enter to Home Row Corrects the implementation of the ISO Community Layouts. [bugfix]
autoferrit
pushed a commit
to SpaceRockMedia/bastardkb-qmk
that referenced
this pull request
Dec 8, 2023
* Add `LAYOUT_tkl_ansi_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_ansi_wkl` [enhancement] * Add `LAYOUT_tkl_iso_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_iso_wkl` [enhancement] * Correct layout data Correct key positioning on the function row. [enhancement] * Friendly-format `info.json` [style] * Move ISO Enter to Home Row Corrects the implementation of the ISO Community Layouts. [bugfix]
zgagnon
pushed a commit
to zgagnon/qmk_firmware_waterfowl
that referenced
this pull request
Dec 15, 2023
* Add `LAYOUT_tkl_ansi_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_ansi_wkl` [enhancement] * Add `LAYOUT_tkl_iso_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_iso_wkl` [enhancement] * Correct layout data Correct key positioning on the function row. [enhancement] * Friendly-format `info.json` [style] * Move ISO Enter to Home Row Corrects the implementation of the ISO Community Layouts. [bugfix]
dan-white3
pushed a commit
to BlueTufa/qmk_firmware
that referenced
this pull request
Dec 23, 2023
* doio/kb16: Added timeout option for OLED boot logo. (#21823) * Revert "fix 60_hhkb ASCII diagram (#21813)" (#21869) This reverts commit af2d6ea128f684691432e2a209cfa11a63f77422. * CannonKeys Meetup Pad 2023 (#21806) Co-authored-by: Ryan <fauxpark@gmail.com> * [keyboard] add sweeq, a ferris/sweep variant with diodes (#21597) * Update macOS install script (#21854) * Abko AK84BT Layout Touch-Up (#21876) * [refactor] rename LAYOUT_75_ansi to LAYOUT * [enhancement] touch-up layout * AH Haven65 Community Layout support (#21880) * [refactor] rename LAYOUT to LAYOUT_65_ansi_blocker * [enhancement] enable Community Layout support * nullbitsco/snap: fix broken keymaps (#21877) * chore: ignore virtual environment directory (#20905) * Add 1upkeyboards Super16v3 (#21665) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * [keyboard] add redragon/k667 (#21417) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: syc <squall_sha@163.com> * Add M6-C Keyboard Firmware (#21852) Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Wolf <contact@vwolf.be> * Added kiserdesigns keyboard folder and Madeline keyboard (#21857) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * redragon/k667: Remove 2 layer VIA restriction (#21889) * AH Haven80 Community Layout support (#21885) * [enhancement] correct layout data * [refactor] rename LAYOUT to LAYOUT_tkl_f13_ansi_tsangan * [enhancement] enable Community Layout support * Haven80 Solder: add LAYOUT_tkl_f13_ansi_tsangan_split_bs_rshift [enhancement] * Haven80 Solder: add LAYOUT_tkl_f13_iso_tsangan_split_bs_rshift [enhancement] * Haven80 Solder: add LAYOUT_tkl_f13_iso_tsangan [enhancement] * Haven80 Solder: extend Community Layout support [enhancement] * ANAVI Macro Pad 12: rename LAYOUT to LAYOUT_ortho_4x3 (#21886) [refactor] * Chosfox CF81: correct layout data (#21902) * Auto-label data-driven efforts (#21900) * CannonKeys Bastion75 Layout Additions (#21899) * [docs] add layout/matrix diagram * [refactor] rename LAYOUT to LAYOUT_all * [enhancement] add LAYOUT_ansi_blocker_split_bs * [enhancement] add LAYOUT_ansi_blocker * [enhancement] add LAYOUT_ansi_blocker_tsangan_split_bs * [enhancement] add LAYOUT_ansi_blocker_tsangan * [enhancement] add LAYOUT_iso_blocker_split_bs * [enhancement] add LAYOUT_iso_blocker * [enhancement] add LAYOUT_iso_blocker_tsangan_split_bs * [enhancement] add LAYOUT_iso_blocker_tsangan * CannonKeys Bastion60 Layout Additions (#21887) * [bugfix] correct LAYOUT_60_iso_tsangan key order * [docs] add layout/matrix diagram * [enhancement] add LAYOUT_60_tsangan_hhkb * [enhancement] add LAYOUT_60_ansi_tsangan * [enhancement] add LAYOUT_60_iso * [enhancement] add LAYOUT_60_iso_split_bs_rshift * [enhancement] add LAYOUT_60_iso_tsangan_split_bs_rshift * [enhancement] add LAYOUT_60_hhkb * [enhancement] extend Community Layout support * CannonKeys Bastion65 Layout Additions (#21888) * [docs] add layout/matrix diagram * [refactor] rename LAYOUT to LAYOUT_all * [enhancement] add LAYOUT_65_ansi_blocker_split_bs * [enhancement] add LAYOUT_65_ansi_blocker * [enhancement] add LAYOUT_65_ansi_blocker_tsangan_split_bs * [enhancement] add LAYOUT_65_ansi_blocker_tsangan * [enhancement] add LAYOUT_65_iso_blocker_split_bs * [enhancement] add LAYOUT_65_iso_blocker * [enhancement] add LAYOUT_65_iso_blocker_tsangan_split_bs * [enhancement] add LAYOUT_65_iso_blocker_tsangan * [enhancement] enable Community Layout support * CannonKeys BastionTKL Layout Additions (#21901) * [docs] add layout/matrix diagram * [enhancement] add LAYOUT_tkl_ansi_split_bs_rshift * [enhancement] add LAYOUT_tkl_ansi_tsangan_split_bs_rshift * [enhancement] add LAYOUT_tkl_ansi_tsangan * [enhancement] add LAYOUT_tkl_f13_ansi_tsangan * [enhancement] add LAYOUT_tkl_f13_ansi_split_bs_rshift * [enhancement] add LAYOUT_tkl_f13_ansi * [enhancement] correct LAYOUT_tkl_iso key order * [enhancement] add LAYOUT_tkl_iso_split_bs_rshift * [enhancement] add LAYOUT_tkl_iso_tsangan_split_bs_rshift * [enhancement] add LAYOUT_tkl_iso_tsangan * [enhancement] add LAYOUT_tkl_f13_iso_split_bs_rshift * [enhancement] add LAYOUT_tkl_f13_iso * [enhancement] add LAYOUT_tkl_f13_iso_tsangan_split_bs_rshift * [enhancement] add LAYOUT_tkl_f13_iso_tsangan * [enhancement] extend Community Layout support * Bump actions/checkout from 3 to 4 (#21907) Bumps [actions/checkout](https://github.com/actions/checkout) from 3 to 4. - [Release notes](https://github.com/actions/checkout/releases) - [Changelog](https://github.com/actions/checkout/blob/main/CHANGELOG.md) - [Commits](https://github.com/actions/checkout/compare/v3...v4) --- updated-dependencies: - dependency-name: actions/checkout dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * GMMK2 65% ISO: Correct layout data (#21925) Correct key sizes/positioning on the right side of the board. * [Docs] Improve contrast for warnings in dark mode (#21928) * GMMK2 96% ANSI: Correct layout data (#21937) [enhancement] * Cipulot EC Theca Community Layout Support (#21913) * Alias `LAYOUT_all` as `LAYOUT_tkl_ansi` The data for `LAYOUT_all` and `LAYOUT_tkl_ansi` is identical, so alias the former to the latter to reduce redundancy. [refactor] * Rename `LAYOUT_tkl_ansi_tsangan_wkl` to `LAYOUT_tkl_ansi_wkl` [refactor] * Enable Community Layout support [enhancement] * customMK EVO70 R2 Layout Additions (#21916) * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add layout/matrix diagram [docs] * Correct layout data Reduce the gap between the encoder/macro section and the alphanumeric section by 0.25u. [enhancement] * Add `LAYOUT_ansi_blocker` [enhancement] * Add `LAYOUT_iso_blocker` [enhancement] * Fix redundant `layout_aliases` keys per dunk2k [bugfix] * [Keyboard] Add Binepad Pixie (#21524) * Add Binepad Pixie * Post waffle87 and drashna review recommendations applied * Post-drashna code review suggestions applied Co-authored-by: Drashna Jaelre <drashna@live.com> * post zvecr review --------- Co-authored-by: Drashna Jaelre <drashna@live.com> * dnworks FRLTKL Community Layout support (#21922) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_tkl_nofrow_iso_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_tsangan` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_wkl` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_tsangan` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_wkl` [enhancement] * Enable Community Layout support [enhancement] * Repair malformed links in keyboard README files (#21969) * Remove oversize binaries (#21976) This stops a situation where a user could end up flashing oversize firmware soft bricking hardware. * Drewkeys Mercury65 Layout Additions (#21924) * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add layout/matrix diagram [docs] * Correct `LAYOUT_all` data Correct the order of the Up arrow and End keys. [enhancement] * Tidy-up `info.json` formatting - add line breaks between physical rows - remove trailing spaces [style] * Add `LAYOUT_iso_blocker_split_bs` [enhancement] * Add `LAYOUT_iso_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_ansi_blocker_split_bs` [enhancement] * Add `LAYOUT_ansi_blocker_tsangan_split_bs` [enhancement] * Gray Studio Think65 v3 Layout Additions (#21930) * Add layout/matrix diagram [docs] * Format `info.json` as strict JSON [style] * Add `LAYOUT_all` [enhancement] * Refactor keymaps to use `LAYOUT_all` Refactor the `default` and `via` keymaps to use the `LAYOUT_all` macro. - change second Left Shift key to `KC_NUBS` - insert `KC_NUHS` keycode - update keycode grid alignment - remove trailing whitespace [refactor] * Rename `LAYOUT_65_blocker` to `LAYOUT_ansi_blocker` [refactor] * Rename `LAYOUT_65_iso_blocker` to `LAYOUT_iso_blocker` [refactor] * Correct `LAYOUT_iso_blocker` matrix data The Quote key was mapped as [1, 14] instead of [2, 12]. [bugfix] * Add `LAYOUT_ansi_blocker_split_bs` [enhancement] * Add `LAYOUT_ansi_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_ansi_blocker_tsangan` [enhancement] * Add `LAYOUT_iso_blocker_split_bs` [enhancement] * Add `LAYOUT_iso_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_iso_blocker_tsangan` [enhancement] * Handwired ScottoKeebs Configurator Updates (#21990) * ScottoKeebs ScottoAlp: Correct layout data [enhancement] * ScottoKeebs ScottoCMD: Correct layout data [enhancement] * ScottoKeebs ScottoErgo: Correct layout data Add hand separation and vertical stagger to the layout data. [enhancement] * ScottoKeebs ScottoFrog: Correct layout data [enhancement] * ScottoKeebs ScottoGame: Correct layout data [enhancement] * ScottoKeebs ScottoInvader: Correct layout data [enhancement] * ScottoKeebs ScottoNum: Correct layout data [enhancement] * ScottoKeebs ScottoSplit: Correct layout data [enhancement] * ScottoKeebs ScottoStarter: Correct layout data [enhancement] * Inland MK47 Community Layout Support (#21998) * Rename `LAYOUT` to `LAYOUT_planck_mit` [refactor] * Enable Community Layout support [enhancement] * Touch-up keymaps - grid-align keycodes [style] * Jaykeeb Sebelas: Standardize Layout Names (#21999) * Rename `LAYOUT_65_ansi_blocker` to `LAYOUT_ansi_blocker` [refactor] * Rename `LAYOUT_65_ansi_blocker_split_bs` to `LAYOUT_ansi_blocker_split_bs` [refactor] * Rename `LAYOUT_65_ansi_blocker_tsangan` to `LAYOUT_ansi_blocker_tsangan` [refactor] * Rename `LAYOUT_65_ansi_blocker_tsangan_split_bs` to `LAYOUT_ansi_blocker_tsangan_split_bs` [refactor] * Keebio NyquistPad Layout Updates (#22000) * Rename `LAYOUT` to `LAYOUT_ortho_5x6` [refactor] * Add `LAYOUT_ortho_5x6_1x2u` [enhancement] * Kibou Suisei Layout Addition (#22001) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_65_ansi_blocker_tsangan_wkl_split_bs` [refactor] * Add `LAYOUT_65_ansi_blocker_tsangan_wkl` [enhancement] * Kopibeng XT87 Layout Additions & Touch-Up (#22002) * Add `LAYOUT_tkl_ansi_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_ansi_wkl` [enhancement] * Add `LAYOUT_tkl_iso_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_iso_wkl` [enhancement] * Correct layout data Correct key positioning on the function row. [enhancement] * Friendly-format `info.json` [style] * Move ISO Enter to Home Row Corrects the implementation of the ISO Community Layouts. [bugfix] * Update to 'peterfalken' userspace configurations (#21836) * Krado Industries Promenade Layout Additions (#22014) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Correct key order [bugfix] * Add `LAYOUT_2x2u` [enhancement] * Add `LAYOUT_2x3u` [enhancement] * Add `LAYOUT_6u_space` [enhancement] * Add `LAYOUT_7u_space` [enhancement] * Touch-up `via` keymap Update keycode grid alignment to match the `default` keymap. [style] * Linworks Fave60a Community Layout Support (#22015) * Friendly-format `info.json` [style] * Correct layout data [chore] * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_60_tsangan_hhkb` [refactor] * Add `LAYOUT_60_ansi_tsangan` [enhancement] * Enable Community Layout support [enhancement] * Maze Studio Jocker 1800 Layout Additions (#22016) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_ansi_split_bs` [refactor] * Add `LAYOUT_ansi` [enhancement] * Add `LAYOUT_ansi_wkl_split_bs` [enhancement] * Add `LAYOUT_ansi_wkl` [enhancement] * Mechlovin Zed65 910 Layout Standardization (#22018) * Add layout/matrix diagram [docs] * Rename `LAYOUT_65_iso_tsangan_split_bs` to `LAYOUT_iso_split_bs` [refactor] * Rename `LAYOUT_65_ansi_tsangan` to `LAYOUT_ansi` [refactor] * Rename `LAYOUT_65_ansi_blocker_tsangan` to `LAYOUT_ansi_blocker_tsangan` [refactor] * Rename `LAYOUT_65_ansi_tsangan_split_bs` to `LAYOUT_all` [refactor] * Mode M256-WS Community Layout Support (#22020) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_65_ansi_blocker_split_bs` [enhancement] * Add `LAYOUT_65_ansi_blocker` [enhancement] * Add `LAYOUT_65_ansi_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_65_ansi_blocker_tsangan` [enhancement] * Add `LAYOUT_65_iso_blocker_split_bs` [enhancement] * Add `LAYOUT_65_iso_blocker` [enhancement] * patch `LAYOUT_65_iso_blocker_split_bs` * patch `LAYOUT_65_iso_blocker` * Add `LAYOUT_65_iso_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_65_iso_blocker_tsangan` [enhancement] * Enable Community Layout support [enhancement] * Mode M256-WH Community Layout Support (#22019) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_65_ansi_blocker` [refactor] * Add `LAYOUT_65_ansi_blocker_tsangan` [enhancement] * Enable Community Layout support [enhancement] * MonsGeek M1: Correct layout data (#22026) Apply vertical offset to the arrow keys. [chore] * `qmk format-json`: Add an in-place mode to format json command (#21610) * QVEX Tech Lynepad2 Layout Update (#22030) * Add layout/matrix diagram [docs] * Update layout data Update layout data to disambiguate the key/joystick/thumbpad functions in Configurator. [chore] * OwLab Jelly Evolv Solder Layout Additions (#22029) * Add layout/matrix diagram [docs] * Friendly-format `info.json` [style] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_ansi_blocker` [enhancement] * Add `LAYOUT_ansi_blocker_split_bs` [enhancement] * Add `LAYOUT_ansi_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_ansi_blocker_tsangan` [enhancement] * Add `LAYOUT_iso_blocker` [enhancement] * Add `LAYOUT_iso_blocker_split_bs` [enhancement] * Add `LAYOUT_iso_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_iso_blocker_tsangan` [enhancement] * Nix Studio Lilith Layout Additions (#22028) * Add layout/matrix diagram [docs] * Sort keys in `info.json` [style] * Add `LAYOUT_65_ansi_blocker_split_bs` [enhancement] * Add `LAYOUT_65_ansi_blocker_tsangan` [enhancement] * Add `LAYOUT_65_iso_blocker_split_bs` [enhancement] * Add `LAYOUT_65_iso_blocker_tsangan_split_bs` [enhancement] * Extend Community Layout support [enhancement] * Neson Design Nico Layout Additions (#22027) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_65_xt_ansi_blocker_split_bs` [refactor] * Add `LAYOUT_65_xt_ansi_blocker` [enhancement] * Add `LAYOUT_65_xt_ansi_blocker_tsangan` [enhancement] * Add `LAYOUT_65_xt_ansi_blocker_tsangan_split_bs` [enhancement] * Touch-up keymaps - grid-align keycodes - use four-space indent - use QMK-native keycode aliases [refactor] * Update `via` keymap Update the `via` keymaps to have the same key assignments as the `default` keymap, which is more fleshed out. [chore] * [Keyboard] Add splitkb.com's Aurora Helix (#21871) Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: Ryan <fauxpark@gmail.com> * [Keyboard] add 1upkeyboards 1upslider8 (#21546) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * [Keyboard] Adding Treasure TYPE-9 series III (#21748) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * Raindrop Layout Updates (#22032) * Add layout/matrix diagram [docs] * Rename `LAYOUT_all` to `LAYOUT_64_ansi_split_bs` [refactor] * Add `LAYOUT_60_ansi_split_bs_rshift` [enhancement] * Rico Phoenix Project No. 1 Layout Additions (#22035) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_65_ansi_rwkl_split_bs` [enhancement] * Add `LAYOUT_65_ansi_rwkl` [enhancement] * Add `LAYOUT_65_ansi_wkl_split_bs` [enhancement] * Add `LAYOUT_65_ansi_wkl` [enhancement] * Add `LAYOUT_65_iso_rwkl_split_bs` [enhancement] * Add `LAYOUT_65_iso_rwkl` [enhancement] * Add `LAYOUT_65_iso_wkl_split_bs` [enhancement] * Add `LAYOUT_65_iso_wkl` [enhancement] * RuckerMachine RM Fullsize Layout Additions (#22036) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_fullsize_108_ansi` [enhancement] * Add `LAYOUT_fullsize_108_ansi_tsangan` [enhancement] * Sho Studios ARC Layout Addition (#22037) * Add layout/matrix diagram [docs] * Format `info.json` Apply four-space indent. [style] * Add `LAYOUT_ansi_split_bs` [enhancement] * Move Digitizer to "Software Features" (#22031) * Add missing gpio and chibios defs to uart.h (#22033) * Fix paragon encoder pinout for soldered version (#22043) * geistmaschine/macropod: fix issues waking up after suspend on apple devices (#22023) * Add all RGB Matrix Animations to city42 (#21992) * Viktus Styrka Topre Layout Standardization and Touch-Up (#22044) * Add layout/matrix diagram [docs] * Alias `LAYOUT_all` to `LAYOUT_split_6u` `LAYOUT_all` and `LAYOUT_split_6u` represent the same matrix positions and sequence, so implement the former as an alias. [refactor] * Touch-up keymaps - grid-align keycodes - use QMK-native keycode aliases [chore] * Friendly-format `info.json` [style] * Correct layout data Correct key sizes/positioning on the bottom row. [chore] * Rename `LAYOUT_2u_6u` to `LAYOUT_65_xt_ansi_blocker` [refactor] * Rename `LAYOUT_2u_7u` to `LAYOUT_65_xt_ansi_blocker_tsangan` [refactor] * Rename `LAYOUT_split_6u` to `LAYOUT_65_xt_ansi_blocker_split_bs` [refactor] * Rename `LAYOUT_split_7u` to `LAYOUT_65_xt_ansi_blocker_tsangan_split_bs` [refactor] * Wolf Neely65 Touch-Up (#22045) * Add layout/matrix diagram [docs] * Friendly-format `info.json` [style] * Touch-up keymaps - grid-align keycodes - use QMK-native keycode aliases [refactor] * Fix keymaps Fix keycodes being assigned out of order with respect to `info.json`. - move XT function keys to left side - move keycodes for position [2, 14] from Home Row to Number Row [bugfix] * Rename `LAYOUT` to `LAYOUT_65_xt_ansi_blocker_tsangan_wkl_split_bs` [refactor] * Add `LAYOUT_65_xt_ansi_blocker_tsangan_wkl` [enhancement] * Wolf Silhouette Community Layout Support (#22052) * Add layout/matrix diagram [docs] * Friendly-format `info.json` [style] * Touch-up layout data Move the ISO Hash key to the main key area. [chore] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_tkl_nofrow_ansi_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_tsangan` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_wkl` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_tsangan` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_wkl` [enhancement] * Enable Community Layout support [enhancement] * Wolf Ziggurat Layout Additions (#22053) * Add layout/matrix diagram [docs] * Friendly-format `info.json` [style] * Touch-up layout data Move the ISO Hash key to the main key area. [chore] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_65_xt_ansi_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_65_xt_ansi_blocker_tsangan` [enhancement] * Add `LAYOUT_65_xt_iso_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_65_xt_iso_blocker_tsangan` [enhancement] * Adding support for the Pteron56 (PCB) keyboard (#21731) * Add missing gpio include to ps2 vendor (#22063) * [Keyboard] Add riot pad (#22060) Co-authored-by: ShandonCodes <shandon@shandon.codes> * DZTech Pluto Community Layout support (#22069) * Add layout/matrix diagram [docs] * Friendly-format `info.json` - apply four-space indent - sort JSON keys in layout objects [style] * Correct `LAYOUT_all` data Correct key sizes/positions of: - ANSI Backslash [1, 13] - ANSI Enter [1, 14] - Fn [3, 13] [chore] * Correct `LAYOUT_iso` data Correct position of Fn key [3, 13]. [chore] * Add `LAYOUT_tkl_nofrow_ansi_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_tsangan` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_wkl` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_tsangan` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_wkl` [enhancement] * Enable Community Layout support [enhancement] * Touch-up keymaps Update keycode grid alignment. [style] * Ubest VN Community Layout Support (#22070) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_65_ansi_split_bs` [enhancement] * Add `LAYOUT_65_ansi` [enhancement] * Add `LAYOUT_65_iso_split_bs` [enhancement] * Add `LAYOUT_65_iso` [enhancement] * Enable Community Layout support [enhancement] * Touch-up keymaps - apply four-space indent - grid-align keycodes [style] * Add OLED logo DP3000 macropad (#21936) * SapuSeven MacroPad12: rename LAYOUT to LAYOUT_ortho_3x4 (#22081) * Alchemist Keyboards OGRN Layout Addition (#22080) * Add layout/matrix diagram [docs] * Friendly-format `info.json` [style] * Add `LAYOUT_ortho_5x4` [enhancement] * Touch-up keymaps - update grid-alignment (layer-to-layer consistency) - fix box drawings [style] * Extend Community Layout support Add `ortho_5x4` to supported Community Layouts. [enhancement] * amend 96_(ansi|iso) community_layouts in keyboards/ (#22066) * Restrict "feature" and "animation" keys (#21895) * [Keyboard] Momokai Aurora (#20419) Co-authored-by: Albert Y <76888457+filterpaper@users.noreply.github.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Joel Challis <git@zvecr.com> * [Keyboard] add Quokka keyboard (#20979) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * apply 66_(ansi|iso) to keyboards (#21834) * Add ScottoSlant Keyboard (#20942) Co-authored-by: Ryan <fauxpark@gmail.com> * Add ScottoMouse Handwired Macropad (#21074) Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Albert Y <76888457+filterpaper@users.noreply.github.com> * Add ScottoFly Keyboard (#20939) Co-authored-by: Ryan <fauxpark@gmail.com> * Add ScottoMacrodeck Macropad (#20946) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * Add ScottoLong Keyboard (#20938) Co-authored-by: Ryan <fauxpark@gmail.com> * Add funtions of Encoder and VIA for redragon/k667 (#21917) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: syc <squall_sha@163.com> * [Keyboard] Add rpk-001 keyboard (#21042) Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: Joy <chang.li@westberrytech.com> * amend 68_(ansi|iso) community_layouts in keyboards/ (#21835) * [Keyboard] Add QCK-75 (#21180) Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Quarkeys Studio Z67 Solder Community Layout Support (#22095) * Quarkeys Studio Z67 Hotswap Community Layout Support (#22096) * kimiko: mirror encoder pins between halves (#21728) * Keychron q9 plus (#21399) Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * add dz60v2 keyboard (#21862) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * add odinmini layout (#21983) Co-authored-by: Ryan <fauxpark@gmail.com> * keymaps: Fix hacker_dvorak build. (#22102) * Allow for `qmk compile -kb all`. (#22022) * Royal Kludge RK G68 Community Layout Support (#22103) * Rename `LAYOUT` to `LAYOUT_65_ansi` [refactor] * Enable Community Layout support [enhancement] * Touch-up keymaps - fix keycode grid alignment [style] * Touch-up readme - link to maintainer's GitHub profile - specify codebase is for RGB version of RK G68 - update Hardware Availability links [docs] * Added OLED SSD1306 128x64 to the verified working table (#22112) * Shoc: physically arrange keymaps/layout macro (#22100) * Fix up `qmk mass-compile` makefile indenting. (#22115) * Add 'dactyl_tracer' keyboard (#20993) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * add subrezon/lancer keyboard (#20792) Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Daniel Osipishin <danielos@retarus.de> * [Keyboard] Add SIRIND Klein (#21951) Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: jack <0x6a73@protonmail.com> * GMMK2 96% ISO: Correct layout data (#22101) * Add reminder about format-json to PR Checklist (#22055) * Add Jank RP2040 Dactyl (#21973) Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * [Keyboard] Enable RGB_TEST animation on riot_pad (#22118) Co-authored-by: ShandonCodes <shandon@shandon.codes> * YMDK Melody96 Matrix Touch-Up (#22113) * Correct layout/matrix diagram Correct swapped designations for ANSI Backslash and ANSI Enter keys. [docs] * Correct matrix data Correct the matrix data for: - `LAYOUT_all` - `LAYOUT_96_ansi` - `LAYOUT_96_ansi_splitbs` which all had the matrix positions for ANSI Backslash and ANSI Enter swapped. [bugfix] * Implement `LAYOUT_hotswap` directly Implement `LAYOUT_hotswap` as its own layout, instead of aliasing it to `LAYOUT_96_ansi`. [bugfix] * Specify primary support for Soldered PCBs Current version of codebase primarily supports Soldered PCBs. [enhancement] [docs] * Update feature_rgblight.md (#21483) * Revert "Update feature_rgblight.md" (#22132) * included keyboard.h. To use is_keyboard_master with a split with an i… (#21571) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: tokky <tokky@localhost-live.attlocal.net> * Added Wyvern Hotswap by BredWorks (#21141) Co-authored-by: Neil Brian Ramirez <nightlykeyboards@gmail.com> Co-authored-by: Neil Brian Ramirez <nightlyboards@gmail.com> * Fix combo_ref_from_layer respect different default layer [#21780] (#21781) * Fix variable misspelling (#21774) * amend split_* community_layouts in keyboards (#21847) * amend 75_(ansi|iso) community_layouts in keyboards/ (#21837) * Add is0gr to QMK (#22024) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> * Document the RP2040-specific PS/2 implementation (#22079) Co-authored-by: Dasky <32983009+daskygit@users.noreply.github.com> * Bump tj-actions/changed-files from 38 to 39 (#21923) Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Add Palmetto PCB (#21955) * Add zoom98 (#22062) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Joel Challis <git@zvecr.com> * Added more rgb effects for rpk-001 keyboard (#22120) * Fix typo in oled_driver (#22134) betwen -> between * Fix entry into bootloader for STM32G431. (#22138) * Fix doc for programmable buttons. (#22136) Co-authored-by: Yanfei Guo <yguo@anl.gov> * rastersoft/minitkl layout corrections (#22130) * [Keyboard] Add spankbd, 3x5+3 split keyboard (#22003) * Initial support for CSTM80 (#22137) * Add support for YMD75 V4 - ISO (#22128) * Drop V2 production updates (#22147) * Allow inline generation of compile_commands.json while doing a `qmk compile`, using `--compiledb` (#21549) * Allow for `qmk mass-compile all:<keymap>` (#22116) Co-authored-by: Joel Challis <git@zvecr.com> * HnahKB Freyr Layout Additions (#22150) * Add layout/matrix diagram [docs] * Add `LAYOUT_tkl_ansi_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_ansi_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_ansi_tsangan` [enhancement] * Add `LAYOUT_tkl_ansi_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_ansi_wkl` [enhancement] * Add `LAYOUT_tkl_iso_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_iso_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_iso_tsangan` [enhancement] * Add `LAYOUT_tkl_iso_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_iso_wkl` [enhancement] * Extend Community Layout support Add as supported layouts: - `tkl_ansi_split_bs_rshift` - `tkl_ansi_tsangan` - `tkl_ansi_tsangan_split_bs_rshift` - `tkl_iso_split_bs_rshift` - `tkl_iso_tsangan` - `tkl_iso_tsangan_split_bs_rshift` [enhancement] * Rura66 Layout Data (#22155) * Friendly-format `info.json` [style] * Update layout data - separate keyboard halves - add vertical stagger [refactor] * add linworks fave60 (#20796) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Add KB12 keyboard (#21605) Co-authored-by: Pablo Martínez <58857054+elpekenin@users.noreply.github.com> Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * 4pplet Eagle/Viper Rep Rev.A Layout Additions II (#22161) * teleport/native: switch from wrongly used user to kb function, boost matrix scan rate (#21172) * enable LTO * change from _user to _kb function * switch matrix io delay to nops, add opt=3 for higher scan rates * disable console which was enabled for testing but collides with endpoint used by VIA * switched from opt=3 to opt=2 * Update keyboards/teleport/native/native.c Co-authored-by: Joel Challis <git@zvecr.com> * slightly upped debounce, as some testers had chatter with async + default debounce --------- Co-authored-by: Joel Challis <git@zvecr.com> * Add Brutalv2 60 Keyboard (#22094) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * keyboards: Add support for Sofle Choc (#16736) Co-developed-by: Brian Low <github@brianlow.com> Co-developed-by: duese <duese@users.noreply.github.com> Co-authored-by: Thomas Weißschuh <thomas@t-8ch.de> * Remove rosetta instructions for Apple Silicon (#22174) * Bastard Keyboards: Add support for Dilemma Max (4x6_4) (#22064) * tentatively add dilemma 4x6_4 WIP untested PR by Casuanoob. Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * Miscellaneous fixes for recently merged keyboards (#22179) * Add Soulstone keyboard (#22093) * [Keyboard] Add SyenaKeyboards (#22168) Co-authored-by: Syenasweta <syenasweta@gmail.com> * Fix minimum python version references (#22191) * Added /handwired/ziyoulang_k3_mod (#21965) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * Add the Split67 keyboard PCB (#22107) Co-authored-by: “yuezp” <“yuezpchn@126.com”> * Monstargear XO87 Soldered: correct layout data (#22199) Correct key positions on the bottom row for `LAYOUT_tkl_ansi_tsangan`. [chore] * Add Acheron Themis and its variants (#22142) Co-authored-by: Drashna Jaelre <drashna@live.com> * Add keyboard Projectd/75/Projectd_75_ansi (#21628) Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: gksygithub <106651989+gksygithub@users.noreply.github.com> * [Keyboard] Add SP-111 v2 keyboard (#21652) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> * [Keyboard] Add qwertyqop60hs (#22164) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Added 3dp660 oled keyboard (#20591) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: xia0 <xiao@morgan.net.au> * Add Wave keyboard (#22054) Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * Add Keychron Q1 Version 2 (#20416) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: adophoxia <100170946+adophoxia@users.noreply.github.com> Co-authored-by: Adophoxia <andyao1528@gmail.com> * Add Line TKL keyboard (#22172) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Add printedpad keyboard (#21202) Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * Add `qmk ci-validate-aliases` (#22205) * Move orphaned Yugo-M files (#22211) Moves files that were left behind by #14996. [bugfix] * Klein_HS PCB support (#22203) * Update vid for printedpad (#22215) * Adding BriianPowell Discipline Keyboard Layout Updates (#21474) * Flag vial keymaps in 'qmk lint' (#22227) * Fix build error when Automatic Mouse Layer is enabled (#22229) * [Keyboard] vinhcatba/uncertainty (#21142) * vinh: test fw for uncertainty (deprecated) * v0.1: update base firmware with 2 layers, use bongo cat animation for oled * v0.1: change directory * v0.1: cleanup * v0.2: update layers * v0.3: add VIA support * v0.3: add VIA support (continue) * vinh: test fw for uncertainty (deprecated) * v0.1: update base firmware with 2 layers, use bongo cat animation for oled * v0.1: change directory * v0.1: cleanup * v0.2: update layers * v0.3: add VIA support * v0.3: add VIA support (continue) * v0.3: change keyboard name, remove eeprom config save in VIA keymap * cleanup for PR * update readme * vinh: test fw for uncertainty (deprecated) * v0.1: update base firmware with 2 layers, use bongo cat animation for oled * v0.1: change directory * v0.1: cleanup * v0.2: update layers * v0.3: add VIA support * v0.3: add VIA support (continue) * vinh: test fw for uncertainty (deprecated) * v0.1: update base firmware with 2 layers, use bongo cat animation for oled * v0.1: change directory * v0.1: cleanup * v0.3: change keyboard name, remove eeprom config save in VIA keymap * cleanup for PR * update readme * add license to header files, update ws2812 driver and DI_PIN to info.json * resovle PR suggestion for config.h, halconf.h, mcuconf.h * update info.json regarding PR comment * update bongo.h regarding PR comment * add oled mode toggle * update readme.md, rules.mk regarding PR comment * add submodule update * move oled handle to keyboard level * Update keyboards/vinhcatba/uncertainty/uncertainty.c forgot user-level proces_record * now using bongo as source file * Apply suggestions from code review remove default value codes * move WPM_ENABLE and ENCODER_MAP_ENABLE to keymap level * Apply suggestions from code review * Apply suggestions from code review * Update keyboards/vinhcatba/uncertainty/config.h * [Keyboard] Split-Cloud Handwired (#21327) * Added new handwired, the Split-Cloud * Minor changes to make clang-format happy * Alligned files with project standard. Trimmed midi out of the default layout, modified the readme, and removed unnecessary files. * Simplified default keymap further, changes to info.json * Moved image to imgur, simplified, and removed the unneeded rules.mk file * Update keyboards/handwired/split_cloud/readme.md Changed image in readme to Huge Thumbnail instead of Original. * Removed unneeded tri layer custom keycodes Now using the built-in functionality! * Update keyboards/handwired/split_cloud/readme.md Accidentally reverted this when making other changes * Fix typo in `docs/feature_tri_layer.md` (#22232) `Stes` -> `Sets` * [Keyboard] HorrorTroll Nyx (#21143) * Added support keyboard Nyx * Resolved zvarc suggested and lint error * Delete FORCE_NKRO due to problem with BIOS on mainboard * Resolved dunk2k suggested and limit more brightness, disable some RGB Effect * Resolved drashna suggested * Delete flower blooming effect and move to rev1 folder * Yampad add missing includes for CONVERT_TO (#22237) * Yampad add missing includes for CONVERT_TO (#22237) * Fix old usage of UNICODE_MODE_MAC (#22238) * [Keyboard] Add MIIIW BlackIO83 (#21970) * Add MIIIW BlackIO83 * Improve the code * Updated instructions for entering the bootloader * Update keyboards/miiiw/blackio83/rev_0100/config.h * Update keyboards/miiiw/blackio83/rev_0100/config.h * Update keyboards/miiiw/blackio83/config.h * Update config.h * [Keyboard] MonsGeek M3 (#20542) * Add keybord monsgeek m3. * Add keybord monsgeek m3. * Add keybord monsgeek m3. * updata rules.mk * add readme.md * delete monsgeek\m3\rgb_matrix_kb.inc * add DISABLE_M3_KEYCODES * user_config --> kb_config * Move code to info.json,and removed redundant features * Update keyboards/monsgeek/m3/info.json * Update keyboards/monsgeek/m3/info.json * Update readme.md * Update keyboards/monsgeek/m3/config.h * Update keyboards/monsgeek/m3/info.json * Update keyboards/monsgeek/m3/info.json * Update keyboards/monsgeek/m3/keymaps/default/keymap.c * Update keyboards/monsgeek/m3/keymaps/via/keymap.c * Update keyboards/monsgeek/m3/readme.md * Update m3.c * Update m3.c * Update info.json * Update keymap.c * Update keymap.c * Update config.h * Update keyboards/monsgeek/m3/readme.md * Update keyboards/monsgeek/m3/rules.mk * Update keyboards/monsgeek/m3/info.json * Update keyboards/monsgeek/m3/keymaps/default/keymap.c * Update keyboards/monsgeek/m3/keymaps/via/keymap.c * Update keyboards/monsgeek/m3/info.json * Update keyboards/monsgeek/m3/info.json * Update keyboards/monsgeek/m3/info.json * Update m3.c * Update keyboards/monsgeek/m3/info.json * Update keyboards/monsgeek/m3/m3.c * Update keymap.c replace the tabs with spaces * Update keymap.c replace the tabs with spaces * add missing gpio include for pointing motion pin (#22246) * [Keyboard] Hineybush H101 (#22186) * initial h101 commit * update keymap and add via support * update doc stuff * readme typo * updates * add indicator LEDs, needs testing * update readme * update USB VID/PID to match VIA json * Update keyboards/hineybush/h101/readme.md * Update keyboards/hineybush/h101/keymaps/default/keymap.c * Update keyboards/hineybush/h101/readme.md * Update keyboards/hineybush/h101/keymaps/via/keymap.c * updates from PR comments * updates per PR comments * idk why the folder is acting weird * maybe this will fix it * update to hopefully fix everything weird * keycode fixes * keymap updates * add 60_(ansi|iso)_wkl* community layouts (#21811) * add 60_(ansi|iso)_tsangan_wkl* layouts * Update keymap.c * `tsangan_wkl` to `wkl` * update info.json * split backspace changes * Apply suggestions from code review * Keyboard change blu/vimclutch to hardware revision B. (#22247) Co-authored-by: Ryan <fauxpark@gmail.com> * Add Ratio60 PCB (#21609) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: 4pplet <4pplet@protonmail.com> Co-authored-by: 4pplet <stefan.ess@gmail.com> * Add 62 key Dactyl Manuform (#21394) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Add `60_iso_tsangan_split_bs_rshift` Community Layout (#21812) * add 60_(ansi|iso)_tsangan_split_bs_shift layouts * shift to rshift * remove 60_ansi_tsangan_split_bs_rshift * Update layouts/default/60_iso_tsangan_split_bs_rshift/info.json * Kisakey (#22217) Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Ryan <fauxpark@gmail.com> * Reword mention of personal keymaps from PR checklist (#22258) * Add support for CSTC40 keyboard (#22154) Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: lesshonor and waffle87 Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: lesshonor Co-authored-by: itsvar <120035196+itsvar8@users.noreply.github.com> * [Keyboard] Add support for EnviousDesign keyboards (#17544) * Add support for Envious.Design Keyboards Add various RP2040 keyboards I've designed. * Fixed missing newlines at EOF. * Ran CLANG-FORMAT and sorted out any potential issues. * Gave keyboards all unique product IDs * Made requested changes. * removed all VIAL related code * sorted out license on all *.h or *.h files * removed outdated RESET Keycode * missed some VIAL bits * Made suggested changes * Made Suggested Changes * missed one file to change. * Attempted fix of CI issues * Update .gitmodules * Revert "Update .gitmodules" This reverts commit f4bace51621ed0c5bd40c729fa1c6339f665f0b7. * hopefully fixed all CI and QMK lint issues * resolve more CI errors and a couple typos * fixed last remaining issue as of now * made requested changes * further more on suggested change * Delete README.md * derpy workaround to change case of readme * finished up 65M firmware via does not work, I will investigate another time. * re-did a lot of 65M firmware bits, also fixed via for this board * corrected mistake in firmware * made suggested change to info.json for 65m/60F * finished 65M non via keymap and re-sorted via keymap * Update keyboards/enviousdesign/tkl/rgb/keymaps/default/keymap.c * Update keyboards/enviousdesign/tkl/rgb/keymaps/default/keymap.c * Apply suggestions from code review Verified updated Info.json works for aforementioned keyboards, * Follow-up commit with aforementioned suggested changes * Apply suggestions from code review correction to a couple typos pointed out. * follow-up removed some un-needed Readmes and corrected a mistake in 60F via keymap * Apply suggestions from code review * Added images of PCB to each Keyboard README * Apply suggestions from code review * Update keyboards/enviousdesign/60f/readme.md * Added missing aspects of info.json and corrected RGB_DI_PIN to WS2812_DI_PIN in RGB keyboard * made requested changes * Update config.h * used QMK migrate to update info.json * Apply suggestions from code review * Update keyboards/enviousdesign/65m/info.json * renamed named keyboards as suggested and added commission keyboard to repo * renamed file to hopefully please lint * renamed things to be all lower case since lint doesn't appear to look for upper case * updated keymap.c and removed unnecessary file * fixed readme and a couple other bits * converted various aspects to json information * attempt fix for lint error * fix some issues I overlooked * Apply suggestions from code review * moved some folders about as suggested * Made suggested changes * Apply suggestions from code review * removed outdated config.h * fixed errors in 65M and mini1800 * Apply suggestions from code review * Update keyboards/enviousdesign/delirium/rev1/info.json * Update keyboards/enviousdesign/65m/info.json * Apply suggestions from code review * [Keyboard] Inland V83P (#21725) * [Keyboard]add v83p keyboard. * Update keymap.c * Update keyboards/inland/v83p/keymaps/via/keymap.c * Update keyboards/inland/v83p/keymaps/default/keymap.c * Update keyboards/inland/v83p/config.h * Update keyboards/inland/v83p/info.json * Update info.json * Update keymap.c * Update keyboards/inland/v83p/mcuconf.h * Update keyboards/inland/v83p/halconf.h * Update keyboards/inland/v83p/info.json * Update keyboards/inland/v83p/v83p.c * Update keymap.c replace the tabs with spaces * Update keymap.c replace the tabs with spaces * Update keyboards/inland/v83p/info.json * [Keyboard] RPNeko65 by lendunistus (#21747) * initialise rpneko65, info.json * force NKRO * define WS2812 stuff and capitalise RPNeko65 * use RGBlight, add ANSI to keymap.c also remove _ADC suffixes from pins * basic readme plus making it so the info.json RGB values are actually recognised as integers * update repository URL * fix info.json formatting * caps lock LED implementation "borrowed" from waffling60 * put RGBLIGHT_ENABLE in json also remove "pin" from the rgblight option * add actually correct keymaps also reformat info.json * move to designer folder, add image to README * move keyboard to separate revision folder and remove erroneous tag from config.h * remove brightness/hue/saturation steps * change device version to 1.0 * move quantum.h include to top * actually, let's try a new image I also forgot to save the info.json file beforehand oops * Remove comma in info.json * Community layouts in info.json * Delete rpneko65/readme.md * Apply suggested changes to readme * Suggested code changes * Suggested imgur link * rename code file this was the issue all along sigh * Correct layer matching this time * Move Enter in info.json * README/info.json change * Another batch of suggestions * amend alice* community_layouts in keyboards (#21846) * add alice* to keyboards * add seigaiha * additions * Update info.json * revert wanderland * add tgr/alice * add matrix diagram.md * [Keyboard] Add Okayu (#22077) Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * Enable encoder map on navpad1.0 (#22266) * [Keyboard] jukaie/jk01 (#20573) * ADD Keyboard * Resolved requested changes * update keymap.c file * resolved requested changes * updated info.json file * Updated requested changes * Delete JK01.h file * Resolved requested changes * Delete readme.md * add rules.mk to default folder * Upload default/keymap.c * Add via/keymap.c * Updated info.Json file * Change VID in info.json * Resolved requested changes * Resolved requested changes. * Resolved requested changes * Updated changes --------- Co-authored-by: gksygithub <gskyGit@gsky.com.tw> * Fix typo in keychron v6 encoder map enable (#22272) * Allow for disabling of parallel processing of qmk find and `qmk mass-compile`. (#22160) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Fixup symbol sizing listing. (#22307) * [Keyboard] Add purin (#22306) * [Keyboard] Add QK100 (#21782) Co-authored-by: Drashna Jaelre <drashna@live.com> * Remove extra led_matrix_indicators_user call (#22329) * [Keyboard] Add LGBTKL (#22331) Co-authored-by: jack <0x6a73@protonmail.com> * Clarify PIO define is optional in docs. (#22339) * [Keyboard] Add Kaly42 (#22282) * Added Kaly/Kaly42 keyboard's minimal files. * Updated readme.md; New link and improved description text. * Apply suggestions from code review Added all suggestions given by @dunk2k Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Added community_layouts to info.json. Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> --------- Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * [Keyboard] add pisces pcb (#22334) * [Keyboard] Waffling60 Rev E ANSI Hotswap (#22270) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Add darkproject/kd87a_bfg_edition keyboard (#18981) Co-authored-by: gksygithub <106651989+gksygithub@users.noreply.github.com> * eason/aeroboard - Modify bootloader (#22286) * [Keyboard] doksin (#22220) * [Keyboard] Add Velvet hotswap & solder (#22284) * Flag more VIAL config options in lint (#22345) * Removed clueboard link as the website has been parked for some time (#22290) * [Keyboard] add enter67 keyboard (#22346) Co-authored-by: “yuezp” <“yuezpchn@126.com”> * Fix for swapped PID and VID (#22372) * Add Kindakeyboards Conone65 Via support (#22320) * [Keyboard] Add TeaQueen (#22352) Co-authored-by: jack <0x6a73@protonmail.com> * [Keyboard] Add Klein_SD (#22371) Co-authored-by: Joel Challis <git@zvecr.com> * boardsource/unicorne - Fixed OLED layers being all set to zero (#22389) * docs(rgblight): fix typos (#22399) * Teaqueen: correct layout data (#22406) * [Keyboard] Add Piantor Pro (#22361) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> * Red Herring PCB support (#22409) Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: jack <0x6a73@protonmail.com> * Add riblee handwired split keyboard (#22277) * [Keyboard] Add Duet Switch Tester (#22367) Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * [Keyboard] Add PCB Utopia88 (#22257) * Fix Herringbone pro Layouts (#22317) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Add iso85k keyboard (#22411) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Fix corne keylog (#22420) * [Keyboard] Fix bug in set_keylog function Fixes issue where some keys would not trigger the oled to output the row and column of a pressed key (would happen with LT(...) for my keymap) * [Keyboard] Tiny improvement to oled_render_keylog for crkbd Added improvement suggestion I got for another keyboard * Fix indicator LED definition for Sofle RGB. (#22408) * Update layer state of Lily58 from 'Default' to 'Base' (#22397) * Add SNES Macropad keyboard (#22377) Co-authored-by: jack <0x6a73@protonmail.com> * Update gregandcin/teaqueen (#22402) * [Keyboard] Add alpaca/wfeclipse (#22230) Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * Add Ploopy Madromys mouse (#21989) Added PloopyCo madromys/adept mouse Co-authored-by: Drashna Jaelre <drashna@live.com> * [Keyboard] Add MariOrion v2.5 (#22273) * Pushed MariOrion v2.5 to the branch. Prod and proto version added. * Pushed MariOrion v2.5 to the branch. Prod and proto version added. * Proper addition of layout options Addition of split bs rshift tsangan layout options. Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Merge branch 'toril940mariorion_v25' of github.com:toril940/qmk_firmware into toril940mariorion_v25 * Merge branch 'toril940mariorion_v25' of github.com:toril940/qmk_firmware into toril940mariorion_v25 * Update keyboards/mariorion_v25/proto/keymaps/via/keymap.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/proto/keymaps/default/keymap.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Updated readme.md with more information regarding make commands, and proto vs prod. * Update keyboards/mariorion_v25/prod/keymaps/via/keymap.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/prod/keymaps/default/keymap.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/prod/info.json Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Amended some changes to info.json - community layouts changed from scope to array. * Update keyboards/mariorion_v25/readme.md Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Revert keyboards/gray_studio/think65/solder/solder.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Revert keyboards/gray_studio/think65/solder/solder.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Revert keyboards/gray_studio/think65/solder/solder.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Removed via.json from the via keymaps. Replaced with matrix_diagram.md. via.json file moved off to [public mariorion_v25 repo](https://github.com/toril940/orion-v25) * Revert keyboards/gray_studio/think65/solder/solder.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Removed via.json from the via keymaps. Replaced with matrix_diagram.md. via.json file moved off to [public mariorion_v25 repo](https://github.com/toril940/orion-v25) * Update keyboards/mariorion_v25/proto/info.json Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/rules.mk Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/proto/info.json Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/proto/info.json Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/proto/info.json Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/prod/info.json Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/prod/info.json Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/prod/info.json Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/prod/info.json Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Revert keyboards/gray_studio/think65/solder/solder.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/matrix_diagram.md Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/readme.md Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/readme.md Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/readme.md Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/readme.md Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/readme.md Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/proto/mariorion_v25.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/prod/mariorion_v25.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Pushed new info.json and keymap.c files. * Pushed new info.json and keymap.c files. * Fixes to LED driver wrt PWM definitions with STM. * Update keyboards/mariorion_v25/prod/keymaps/via/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/prod/keymaps/via/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/prod/info.json Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/prod/mariorion_v25.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/proto/info.json Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/proto/config.h Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/proto/mariorion_v25.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/proto/mariorion_v25.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/proto/keymaps/via/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/proto/keymaps/via/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Committing a details update to readme.md. * Committing a details update to readme.md. * Update keyboards/mariorion_v25/prod/config.h Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/prod/mariorion_v25.c Co-authored-by: Ryan <fauxpark@gmail.com> * Revert "Committing a details update to readme.md." This reverts commit 068a82a1fcf1996d87f7f97a10e9f5fbbee79a29. * Committing a details update to readme.md. * Update keyboards/mariorion_v25/halconf.h Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/mcuconf.h Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/prod/config.h Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/proto/config.h Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/halconf.h Co-authored-by: Ryan <fauxpark@gmail.com> * Production pictures replacing the standard ones in the readme.md :) * waffle87 requests bundled: - Licence headers added - Codeblocked matrix_diagram.md - Consolidated files where possible - Removed excess from config.h --------- Co-authored-by: toril940 <anastasialucas940@hotmail.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: Ryan <fauxpark@gmail.com> * Add `qmk license-check` developer-level CLI command. (#22075) * add 5087 keyboard (#20557) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * studiokestra/line_tkl: correct layout data (#22455) * fix `layouts` data * add EoF * [Keyboard] Fixes to make snes_macropad play nicer with qmk configurator (#22432) * [Keyboard] Change default implementation for get_layer_name_user Will now show the layer number instead of "Unknown", since this is what will be shown if QMK Configurator is used to compile the firmware. * [Keyboard] Update the layout info This makes it look sort of like a macropad + gamepad rather than an 4x6 ortholinear keyboard. * [Keyboard] Fix default implementation of get_layer_name_user Based on feedback from code review the implementation was swapped in favor of using get_u8_str. This implied a change to the argument type from int to uint8_t, which cascaded into the existing keymaps. (This made sense in general, since the return type of get_highest_layer is also a uint8_t.) * add `68_ansi` Community Layout to nebula68b (#22433) * Fix typos: key-modifer→key-modifier and interacton→interaction (#22464) * Bs equals (#21690) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: jack <0x6A73@pm.me> * Update stale.yml (#22473) * Update stale.yml * [Keyboard] Add Eden (#22467) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Add leonardo build target for leonardo + usb2.0 shield based projects (#22243) * [Keyboard] Add dnworks 997pt3 (#22466) Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * [Doc] Improve converter references (#21801) * reset master to upstream (#35) * Update 1up keymaps (#36) * Fix IJ debugger shortcut (#37) --------- Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: Lasse Luttermann <lasse.luttermann@gmail.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Andrew Kannan <andrew.kannan@klaviyo.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Idan Kamara <i@idank.me> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: Jay Greco <jayv.greco@gmail.com> Co-authored-by: Frank Ebel <git@ebel.page> Co-authored-by: ziptyze <mwcordier@gmail.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: temp4gh <temp4bbs@163.com> Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: syc <squall_sha@163.com> Co-authored-by: Wolf Van Herreweghe <wolfvanh@gmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Wolf <contact@vwolf.be> Co-authored-by: NCKiser <37519411+NCKiser@users.noreply.github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: 3geek14 <nerd.of.pi@gmail.com> Co-authored-by: Vino Rodrigues <366673+vinorodrigues@users.noreply.github.com> Co-authored-by: Falco Gerritsjans <FalcoG@users.noreply.github.com> Co-authored-by: Dasky <32983009+daskygit@users.noreply.github.com> Co-authored-by: Luis Garcia <luis@bitjester.com> Co-authored-by: harveysch <126267034+harveysch@users.noreply.github.com> Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: TreasureTypes <73436366+TreasureTypes@users.noreply.github.com> Co-authored-by: Constantine Karos <36245370+karosc@users.noreply.github.com> Co-authored-by: Yak <68242321+yakMM@users.noreply.github.com> Co-authored-by: Moritz Plattner <moritz.plattner@gmx.net> Co-authored-by: Controller Works <103382872+controller-works@users.noreply.github.com> Co-authored-by: Filip Sund <filip.sund@gmail.com> Co-authored-by: Shandon Anderson <CheeseL0ver@users.noreply.github.com> Co-authored-by: ShandonCodes <shandon@shandon.codes> Co-authored-by: Deddia Permana <deddiapermana97@gmail.com> Co-authored-by: peepeetee <43021794+peepeetee@users.noreply.github.com> Co-authored-by: Albert Y <76888457+filterpaper@users.noreply.github.com> Co-authored-by: Dan Ford <dan-github2@dlford.co> Co-authored-by: Joe Scotto <8194147+joe-scotto@users.noreply.github.com> Co-authored-by: Joy Lee <joylee.lc@foxmail.com> Co-authored-by: Joy <chang.li@westberrytech.com> Co-authored-by: Poring <97579443+PoringH@users.noreply.github.com> Co-authored-by: Charles Strahan <charles@cstrahan.com> Co-authored-by: lalalademaxiya1 <66767061+lalalademaxiya1@users.noreply.github.com> Co-authored-by: dztech <moyi4681@users.noreply.github.com> Co-authored-by: Apteryks <maxim.cournoyer@gmail.com> Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: Ryan Neff <ryan.ray.neff@fluke.com> Co-authored-by: Daniel Osipishin <88534270+subrezon@users.noreply.github.com> Co-authored-by: Daniel Osipishin <danielos@retarus.de> Co-authored-by: era <73109780+eerraa@users.noreply.github.com> Co-authored-by: lendunistus <53618962+lendunistus@users.noreply.github.com> Co-authored-by: Ethan Perry <86326912+wheres-perry@users.noreply.github.com> Co-authored-by: Tom singleton <Radther@users.noreply.github.com> Co-authored-by: T.A <83424097+t0kies@users.noreply.github.com> Co-authored-by: tokky <tokky@localhost-live.attlocal.net> Co-authored-by: DeskDaily <65656486+DeskDaily@users.noreply.github.com> Co-authored-by: Neil Brian Ramirez <nightlykeyboards@gmail.com> Co-authored-by: Neil Brian Ramirez <nightlyboards@gmail.com> Co-authored-by: Ben Cooper <63478578+bncpr@users.noreply.github.com> Co-authored-by: plaublin <pl@pakupaku.me> Co-authored-by: Andrew Kannan <andrew.kannan@gmail.com> Co-authored-by: Michael Büchler <michael.buechler@posteo.net> Co-authored-by: Ross Montsinger <rmontsinger@gmail.com> Co-authored-by: spbgzh <72414103+spbgzh@users.noreply.github.com> Co-authored-by: Ikko Eltociear Ashimine <eltociear@gmail.com> Co-authored-by: Yanfei Guo <yanf.guo@gmail.com> Co-authored-by: Yanfei Guo <yguo@anl.gov> Co-authored-by: DUILCHOI <48977039+duilchoi@users.noreply.github.com> Co-authored-by: DOIO2022 <116554792+DOIO2022@users.noreply.github.com> Co-authored-by: Pablo Martínez <58857054+elpekenin@users.noreply.github.com> Co-authored-by: Brian Low <brian@brianlow.com> Co-authored-by: Thomas Weißschuh <thomas@t-8ch.de> Co-authored-by: casuanoob <96005765+casuanoob@users.noreply.github.com> Co-authored-by: Sergey Fedorov <oni.strech@gmail.com> Co-authored-by: Syenasweta <nshrllh.l.fz@gmail.com> Co-authored-by: Syenasweta <syenasweta@gmail.com> Co-authored-by: Coom <1655787+coomstoolbox@users.noreply.github.com> Co-authored-by: yuezp <49514776+LXF-YZP@users.noreply.github.com> Co-authored-by: “yuezp” <“yuezpchn@126.com”> Co-authored-by: Álvaro A. Volpato <alvaro.augusto.volpato@gmail.com> Co-authored-by: gskygithub <106651989+gskygithub@users.noreply.github.com> Co-authored-by: gksygithub <106651989+gksygithub@users.noreply.github.com> Co-authored-by: thompson-ele <ele.thompson12@gmail.com> Co-authored-by: leyew <102467346+itsme-zeix@users.noreply.github.com> Co-authored-by: xia0 <307671+xia0@users.noreply.github.com> Co-authored-by: xia0 <xiao@morgan.net.au> Co-authored-by: Etienne Collin <collin.etienne.media@gmail.com> Co-authored-by: adophoxia <100170946+adophoxia@users.noreply.github.com> Co-authored-by: Adophoxia <andyao1528@gmail.com> Co-authored-by: studiokestra <74369928+studiokestra@users.noreply.github.com> Co-authored-by: noahbei <123449614+noahbei@users.noreply.github.com> Co-authored-by: Brian <brian@powell.place> Co-authored-by: ikorihn <16367098+ikorihn@user…
chaos2007
added a commit
to chaos2007/qmk_firmware
that referenced
this pull request
Sep 2, 2024
* doio/kb16: Added timeout option for OLED boot logo. (#21823) * Revert "fix 60_hhkb ASCII diagram (#21813)" (#21869) This reverts commit af2d6ea128f684691432e2a209cfa11a63f77422. * CannonKeys Meetup Pad 2023 (#21806) Co-authored-by: Ryan <fauxpark@gmail.com> * [keyboard] add sweeq, a ferris/sweep variant with diodes (#21597) * Update macOS install script (#21854) * Abko AK84BT Layout Touch-Up (#21876) * [refactor] rename LAYOUT_75_ansi to LAYOUT * [enhancement] touch-up layout * AH Haven65 Community Layout support (#21880) * [refactor] rename LAYOUT to LAYOUT_65_ansi_blocker * [enhancement] enable Community Layout support * nullbitsco/snap: fix broken keymaps (#21877) * chore: ignore virtual environment directory (#20905) * Add 1upkeyboards Super16v3 (#21665) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * [keyboard] add redragon/k667 (#21417) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: syc <squall_sha@163.com> * Add M6-C Keyboard Firmware (#21852) Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Wolf <contact@vwolf.be> * Added kiserdesigns keyboard folder and Madeline keyboard (#21857) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * redragon/k667: Remove 2 layer VIA restriction (#21889) * AH Haven80 Community Layout support (#21885) * [enhancement] correct layout data * [refactor] rename LAYOUT to LAYOUT_tkl_f13_ansi_tsangan * [enhancement] enable Community Layout support * Haven80 Solder: add LAYOUT_tkl_f13_ansi_tsangan_split_bs_rshift [enhancement] * Haven80 Solder: add LAYOUT_tkl_f13_iso_tsangan_split_bs_rshift [enhancement] * Haven80 Solder: add LAYOUT_tkl_f13_iso_tsangan [enhancement] * Haven80 Solder: extend Community Layout support [enhancement] * ANAVI Macro Pad 12: rename LAYOUT to LAYOUT_ortho_4x3 (#21886) [refactor] * Chosfox CF81: correct layout data (#21902) * Auto-label data-driven efforts (#21900) * CannonKeys Bastion75 Layout Additions (#21899) * [docs] add layout/matrix diagram * [refactor] rename LAYOUT to LAYOUT_all * [enhancement] add LAYOUT_ansi_blocker_split_bs * [enhancement] add LAYOUT_ansi_blocker * [enhancement] add LAYOUT_ansi_blocker_tsangan_split_bs * [enhancement] add LAYOUT_ansi_blocker_tsangan * [enhancement] add LAYOUT_iso_blocker_split_bs * [enhancement] add LAYOUT_iso_blocker * [enhancement] add LAYOUT_iso_blocker_tsangan_split_bs * [enhancement] add LAYOUT_iso_blocker_tsangan * CannonKeys Bastion60 Layout Additions (#21887) * [bugfix] correct LAYOUT_60_iso_tsangan key order * [docs] add layout/matrix diagram * [enhancement] add LAYOUT_60_tsangan_hhkb * [enhancement] add LAYOUT_60_ansi_tsangan * [enhancement] add LAYOUT_60_iso * [enhancement] add LAYOUT_60_iso_split_bs_rshift * [enhancement] add LAYOUT_60_iso_tsangan_split_bs_rshift * [enhancement] add LAYOUT_60_hhkb * [enhancement] extend Community Layout support * CannonKeys Bastion65 Layout Additions (#21888) * [docs] add layout/matrix diagram * [refactor] rename LAYOUT to LAYOUT_all * [enhancement] add LAYOUT_65_ansi_blocker_split_bs * [enhancement] add LAYOUT_65_ansi_blocker * [enhancement] add LAYOUT_65_ansi_blocker_tsangan_split_bs * [enhancement] add LAYOUT_65_ansi_blocker_tsangan * [enhancement] add LAYOUT_65_iso_blocker_split_bs * [enhancement] add LAYOUT_65_iso_blocker * [enhancement] add LAYOUT_65_iso_blocker_tsangan_split_bs * [enhancement] add LAYOUT_65_iso_blocker_tsangan * [enhancement] enable Community Layout support * CannonKeys BastionTKL Layout Additions (#21901) * [docs] add layout/matrix diagram * [enhancement] add LAYOUT_tkl_ansi_split_bs_rshift * [enhancement] add LAYOUT_tkl_ansi_tsangan_split_bs_rshift * [enhancement] add LAYOUT_tkl_ansi_tsangan * [enhancement] add LAYOUT_tkl_f13_ansi_tsangan * [enhancement] add LAYOUT_tkl_f13_ansi_split_bs_rshift * [enhancement] add LAYOUT_tkl_f13_ansi * [enhancement] correct LAYOUT_tkl_iso key order * [enhancement] add LAYOUT_tkl_iso_split_bs_rshift * [enhancement] add LAYOUT_tkl_iso_tsangan_split_bs_rshift * [enhancement] add LAYOUT_tkl_iso_tsangan * [enhancement] add LAYOUT_tkl_f13_iso_split_bs_rshift * [enhancement] add LAYOUT_tkl_f13_iso * [enhancement] add LAYOUT_tkl_f13_iso_tsangan_split_bs_rshift * [enhancement] add LAYOUT_tkl_f13_iso_tsangan * [enhancement] extend Community Layout support * Bump actions/checkout from 3 to 4 (#21907) Bumps [actions/checkout](https://github.com/actions/checkout) from 3 to 4. - [Release notes](https://github.com/actions/checkout/releases) - [Changelog](https://github.com/actions/checkout/blob/main/CHANGELOG.md) - [Commits](https://github.com/actions/checkout/compare/v3...v4) --- updated-dependencies: - dependency-name: actions/checkout dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * GMMK2 65% ISO: Correct layout data (#21925) Correct key sizes/positioning on the right side of the board. * [Docs] Improve contrast for warnings in dark mode (#21928) * GMMK2 96% ANSI: Correct layout data (#21937) [enhancement] * Cipulot EC Theca Community Layout Support (#21913) * Alias `LAYOUT_all` as `LAYOUT_tkl_ansi` The data for `LAYOUT_all` and `LAYOUT_tkl_ansi` is identical, so alias the former to the latter to reduce redundancy. [refactor] * Rename `LAYOUT_tkl_ansi_tsangan_wkl` to `LAYOUT_tkl_ansi_wkl` [refactor] * Enable Community Layout support [enhancement] * customMK EVO70 R2 Layout Additions (#21916) * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add layout/matrix diagram [docs] * Correct layout data Reduce the gap between the encoder/macro section and the alphanumeric section by 0.25u. [enhancement] * Add `LAYOUT_ansi_blocker` [enhancement] * Add `LAYOUT_iso_blocker` [enhancement] * Fix redundant `layout_aliases` keys per dunk2k [bugfix] * [Keyboard] Add Binepad Pixie (#21524) * Add Binepad Pixie * Post waffle87 and drashna review recommendations applied * Post-drashna code review suggestions applied Co-authored-by: Drashna Jaelre <drashna@live.com> * post zvecr review --------- Co-authored-by: Drashna Jaelre <drashna@live.com> * dnworks FRLTKL Community Layout support (#21922) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_tkl_nofrow_iso_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_tsangan` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_wkl` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_tsangan` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_wkl` [enhancement] * Enable Community Layout support [enhancement] * Repair malformed links in keyboard README files (#21969) * Remove oversize binaries (#21976) This stops a situation where a user could end up flashing oversize firmware soft bricking hardware. * Drewkeys Mercury65 Layout Additions (#21924) * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add layout/matrix diagram [docs] * Correct `LAYOUT_all` data Correct the order of the Up arrow and End keys. [enhancement] * Tidy-up `info.json` formatting - add line breaks between physical rows - remove trailing spaces [style] * Add `LAYOUT_iso_blocker_split_bs` [enhancement] * Add `LAYOUT_iso_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_ansi_blocker_split_bs` [enhancement] * Add `LAYOUT_ansi_blocker_tsangan_split_bs` [enhancement] * Gray Studio Think65 v3 Layout Additions (#21930) * Add layout/matrix diagram [docs] * Format `info.json` as strict JSON [style] * Add `LAYOUT_all` [enhancement] * Refactor keymaps to use `LAYOUT_all` Refactor the `default` and `via` keymaps to use the `LAYOUT_all` macro. - change second Left Shift key to `KC_NUBS` - insert `KC_NUHS` keycode - update keycode grid alignment - remove trailing whitespace [refactor] * Rename `LAYOUT_65_blocker` to `LAYOUT_ansi_blocker` [refactor] * Rename `LAYOUT_65_iso_blocker` to `LAYOUT_iso_blocker` [refactor] * Correct `LAYOUT_iso_blocker` matrix data The Quote key was mapped as [1, 14] instead of [2, 12]. [bugfix] * Add `LAYOUT_ansi_blocker_split_bs` [enhancement] * Add `LAYOUT_ansi_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_ansi_blocker_tsangan` [enhancement] * Add `LAYOUT_iso_blocker_split_bs` [enhancement] * Add `LAYOUT_iso_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_iso_blocker_tsangan` [enhancement] * Handwired ScottoKeebs Configurator Updates (#21990) * ScottoKeebs ScottoAlp: Correct layout data [enhancement] * ScottoKeebs ScottoCMD: Correct layout data [enhancement] * ScottoKeebs ScottoErgo: Correct layout data Add hand separation and vertical stagger to the layout data. [enhancement] * ScottoKeebs ScottoFrog: Correct layout data [enhancement] * ScottoKeebs ScottoGame: Correct layout data [enhancement] * ScottoKeebs ScottoInvader: Correct layout data [enhancement] * ScottoKeebs ScottoNum: Correct layout data [enhancement] * ScottoKeebs ScottoSplit: Correct layout data [enhancement] * ScottoKeebs ScottoStarter: Correct layout data [enhancement] * Inland MK47 Community Layout Support (#21998) * Rename `LAYOUT` to `LAYOUT_planck_mit` [refactor] * Enable Community Layout support [enhancement] * Touch-up keymaps - grid-align keycodes [style] * Jaykeeb Sebelas: Standardize Layout Names (#21999) * Rename `LAYOUT_65_ansi_blocker` to `LAYOUT_ansi_blocker` [refactor] * Rename `LAYOUT_65_ansi_blocker_split_bs` to `LAYOUT_ansi_blocker_split_bs` [refactor] * Rename `LAYOUT_65_ansi_blocker_tsangan` to `LAYOUT_ansi_blocker_tsangan` [refactor] * Rename `LAYOUT_65_ansi_blocker_tsangan_split_bs` to `LAYOUT_ansi_blocker_tsangan_split_bs` [refactor] * Keebio NyquistPad Layout Updates (#22000) * Rename `LAYOUT` to `LAYOUT_ortho_5x6` [refactor] * Add `LAYOUT_ortho_5x6_1x2u` [enhancement] * Kibou Suisei Layout Addition (#22001) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_65_ansi_blocker_tsangan_wkl_split_bs` [refactor] * Add `LAYOUT_65_ansi_blocker_tsangan_wkl` [enhancement] * Kopibeng XT87 Layout Additions & Touch-Up (#22002) * Add `LAYOUT_tkl_ansi_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_ansi_wkl` [enhancement] * Add `LAYOUT_tkl_iso_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_iso_wkl` [enhancement] * Correct layout data Correct key positioning on the function row. [enhancement] * Friendly-format `info.json` [style] * Move ISO Enter to Home Row Corrects the implementation of the ISO Community Layouts. [bugfix] * Update to 'peterfalken' userspace configurations (#21836) * Krado Industries Promenade Layout Additions (#22014) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Correct key order [bugfix] * Add `LAYOUT_2x2u` [enhancement] * Add `LAYOUT_2x3u` [enhancement] * Add `LAYOUT_6u_space` [enhancement] * Add `LAYOUT_7u_space` [enhancement] * Touch-up `via` keymap Update keycode grid alignment to match the `default` keymap. [style] * Linworks Fave60a Community Layout Support (#22015) * Friendly-format `info.json` [style] * Correct layout data [chore] * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_60_tsangan_hhkb` [refactor] * Add `LAYOUT_60_ansi_tsangan` [enhancement] * Enable Community Layout support [enhancement] * Maze Studio Jocker 1800 Layout Additions (#22016) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_ansi_split_bs` [refactor] * Add `LAYOUT_ansi` [enhancement] * Add `LAYOUT_ansi_wkl_split_bs` [enhancement] * Add `LAYOUT_ansi_wkl` [enhancement] * Mechlovin Zed65 910 Layout Standardization (#22018) * Add layout/matrix diagram [docs] * Rename `LAYOUT_65_iso_tsangan_split_bs` to `LAYOUT_iso_split_bs` [refactor] * Rename `LAYOUT_65_ansi_tsangan` to `LAYOUT_ansi` [refactor] * Rename `LAYOUT_65_ansi_blocker_tsangan` to `LAYOUT_ansi_blocker_tsangan` [refactor] * Rename `LAYOUT_65_ansi_tsangan_split_bs` to `LAYOUT_all` [refactor] * Mode M256-WS Community Layout Support (#22020) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_65_ansi_blocker_split_bs` [enhancement] * Add `LAYOUT_65_ansi_blocker` [enhancement] * Add `LAYOUT_65_ansi_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_65_ansi_blocker_tsangan` [enhancement] * Add `LAYOUT_65_iso_blocker_split_bs` [enhancement] * Add `LAYOUT_65_iso_blocker` [enhancement] * patch `LAYOUT_65_iso_blocker_split_bs` * patch `LAYOUT_65_iso_blocker` * Add `LAYOUT_65_iso_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_65_iso_blocker_tsangan` [enhancement] * Enable Community Layout support [enhancement] * Mode M256-WH Community Layout Support (#22019) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_65_ansi_blocker` [refactor] * Add `LAYOUT_65_ansi_blocker_tsangan` [enhancement] * Enable Community Layout support [enhancement] * MonsGeek M1: Correct layout data (#22026) Apply vertical offset to the arrow keys. [chore] * `qmk format-json`: Add an in-place mode to format json command (#21610) * QVEX Tech Lynepad2 Layout Update (#22030) * Add layout/matrix diagram [docs] * Update layout data Update layout data to disambiguate the key/joystick/thumbpad functions in Configurator. [chore] * OwLab Jelly Evolv Solder Layout Additions (#22029) * Add layout/matrix diagram [docs] * Friendly-format `info.json` [style] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_ansi_blocker` [enhancement] * Add `LAYOUT_ansi_blocker_split_bs` [enhancement] * Add `LAYOUT_ansi_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_ansi_blocker_tsangan` [enhancement] * Add `LAYOUT_iso_blocker` [enhancement] * Add `LAYOUT_iso_blocker_split_bs` [enhancement] * Add `LAYOUT_iso_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_iso_blocker_tsangan` [enhancement] * Nix Studio Lilith Layout Additions (#22028) * Add layout/matrix diagram [docs] * Sort keys in `info.json` [style] * Add `LAYOUT_65_ansi_blocker_split_bs` [enhancement] * Add `LAYOUT_65_ansi_blocker_tsangan` [enhancement] * Add `LAYOUT_65_iso_blocker_split_bs` [enhancement] * Add `LAYOUT_65_iso_blocker_tsangan_split_bs` [enhancement] * Extend Community Layout support [enhancement] * Neson Design Nico Layout Additions (#22027) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_65_xt_ansi_blocker_split_bs` [refactor] * Add `LAYOUT_65_xt_ansi_blocker` [enhancement] * Add `LAYOUT_65_xt_ansi_blocker_tsangan` [enhancement] * Add `LAYOUT_65_xt_ansi_blocker_tsangan_split_bs` [enhancement] * Touch-up keymaps - grid-align keycodes - use four-space indent - use QMK-native keycode aliases [refactor] * Update `via` keymap Update the `via` keymaps to have the same key assignments as the `default` keymap, which is more fleshed out. [chore] * [Keyboard] Add splitkb.com's Aurora Helix (#21871) Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: Ryan <fauxpark@gmail.com> * [Keyboard] add 1upkeyboards 1upslider8 (#21546) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * [Keyboard] Adding Treasure TYPE-9 series III (#21748) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * Raindrop Layout Updates (#22032) * Add layout/matrix diagram [docs] * Rename `LAYOUT_all` to `LAYOUT_64_ansi_split_bs` [refactor] * Add `LAYOUT_60_ansi_split_bs_rshift` [enhancement] * Rico Phoenix Project No. 1 Layout Additions (#22035) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_65_ansi_rwkl_split_bs` [enhancement] * Add `LAYOUT_65_ansi_rwkl` [enhancement] * Add `LAYOUT_65_ansi_wkl_split_bs` [enhancement] * Add `LAYOUT_65_ansi_wkl` [enhancement] * Add `LAYOUT_65_iso_rwkl_split_bs` [enhancement] * Add `LAYOUT_65_iso_rwkl` [enhancement] * Add `LAYOUT_65_iso_wkl_split_bs` [enhancement] * Add `LAYOUT_65_iso_wkl` [enhancement] * RuckerMachine RM Fullsize Layout Additions (#22036) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_fullsize_108_ansi` [enhancement] * Add `LAYOUT_fullsize_108_ansi_tsangan` [enhancement] * Sho Studios ARC Layout Addition (#22037) * Add layout/matrix diagram [docs] * Format `info.json` Apply four-space indent. [style] * Add `LAYOUT_ansi_split_bs` [enhancement] * Move Digitizer to "Software Features" (#22031) * Add missing gpio and chibios defs to uart.h (#22033) * Fix paragon encoder pinout for soldered version (#22043) * geistmaschine/macropod: fix issues waking up after suspend on apple devices (#22023) * Add all RGB Matrix Animations to city42 (#21992) * Viktus Styrka Topre Layout Standardization and Touch-Up (#22044) * Add layout/matrix diagram [docs] * Alias `LAYOUT_all` to `LAYOUT_split_6u` `LAYOUT_all` and `LAYOUT_split_6u` represent the same matrix positions and sequence, so implement the former as an alias. [refactor] * Touch-up keymaps - grid-align keycodes - use QMK-native keycode aliases [chore] * Friendly-format `info.json` [style] * Correct layout data Correct key sizes/positioning on the bottom row. [chore] * Rename `LAYOUT_2u_6u` to `LAYOUT_65_xt_ansi_blocker` [refactor] * Rename `LAYOUT_2u_7u` to `LAYOUT_65_xt_ansi_blocker_tsangan` [refactor] * Rename `LAYOUT_split_6u` to `LAYOUT_65_xt_ansi_blocker_split_bs` [refactor] * Rename `LAYOUT_split_7u` to `LAYOUT_65_xt_ansi_blocker_tsangan_split_bs` [refactor] * Wolf Neely65 Touch-Up (#22045) * Add layout/matrix diagram [docs] * Friendly-format `info.json` [style] * Touch-up keymaps - grid-align keycodes - use QMK-native keycode aliases [refactor] * Fix keymaps Fix keycodes being assigned out of order with respect to `info.json`. - move XT function keys to left side - move keycodes for position [2, 14] from Home Row to Number Row [bugfix] * Rename `LAYOUT` to `LAYOUT_65_xt_ansi_blocker_tsangan_wkl_split_bs` [refactor] * Add `LAYOUT_65_xt_ansi_blocker_tsangan_wkl` [enhancement] * Wolf Silhouette Community Layout Support (#22052) * Add layout/matrix diagram [docs] * Friendly-format `info.json` [style] * Touch-up layout data Move the ISO Hash key to the main key area. [chore] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_tkl_nofrow_ansi_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_tsangan` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_wkl` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_tsangan` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_wkl` [enhancement] * Enable Community Layout support [enhancement] * Wolf Ziggurat Layout Additions (#22053) * Add layout/matrix diagram [docs] * Friendly-format `info.json` [style] * Touch-up layout data Move the ISO Hash key to the main key area. [chore] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_65_xt_ansi_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_65_xt_ansi_blocker_tsangan` [enhancement] * Add `LAYOUT_65_xt_iso_blocker_tsangan_split_bs` [enhancement] * Add `LAYOUT_65_xt_iso_blocker_tsangan` [enhancement] * Adding support for the Pteron56 (PCB) keyboard (#21731) * Add missing gpio include to ps2 vendor (#22063) * [Keyboard] Add riot pad (#22060) Co-authored-by: ShandonCodes <shandon@shandon.codes> * DZTech Pluto Community Layout support (#22069) * Add layout/matrix diagram [docs] * Friendly-format `info.json` - apply four-space indent - sort JSON keys in layout objects [style] * Correct `LAYOUT_all` data Correct key sizes/positions of: - ANSI Backslash [1, 13] - ANSI Enter [1, 14] - Fn [3, 13] [chore] * Correct `LAYOUT_iso` data Correct position of Fn key [3, 13]. [chore] * Add `LAYOUT_tkl_nofrow_ansi_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_tsangan` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_ansi_wkl` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_tsangan` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_nofrow_iso_wkl` [enhancement] * Enable Community Layout support [enhancement] * Touch-up keymaps Update keycode grid alignment. [style] * Ubest VN Community Layout Support (#22070) * Add layout/matrix diagram [docs] * Rename `LAYOUT` to `LAYOUT_all` [refactor] * Add `LAYOUT_65_ansi_split_bs` [enhancement] * Add `LAYOUT_65_ansi` [enhancement] * Add `LAYOUT_65_iso_split_bs` [enhancement] * Add `LAYOUT_65_iso` [enhancement] * Enable Community Layout support [enhancement] * Touch-up keymaps - apply four-space indent - grid-align keycodes [style] * Add OLED logo DP3000 macropad (#21936) * SapuSeven MacroPad12: rename LAYOUT to LAYOUT_ortho_3x4 (#22081) * Alchemist Keyboards OGRN Layout Addition (#22080) * Add layout/matrix diagram [docs] * Friendly-format `info.json` [style] * Add `LAYOUT_ortho_5x4` [enhancement] * Touch-up keymaps - update grid-alignment (layer-to-layer consistency) - fix box drawings [style] * Extend Community Layout support Add `ortho_5x4` to supported Community Layouts. [enhancement] * amend 96_(ansi|iso) community_layouts in keyboards/ (#22066) * Restrict "feature" and "animation" keys (#21895) * [Keyboard] Momokai Aurora (#20419) Co-authored-by: Albert Y <76888457+filterpaper@users.noreply.github.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Joel Challis <git@zvecr.com> * [Keyboard] add Quokka keyboard (#20979) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * apply 66_(ansi|iso) to keyboards (#21834) * Add ScottoSlant Keyboard (#20942) Co-authored-by: Ryan <fauxpark@gmail.com> * Add ScottoMouse Handwired Macropad (#21074) Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Albert Y <76888457+filterpaper@users.noreply.github.com> * Add ScottoFly Keyboard (#20939) Co-authored-by: Ryan <fauxpark@gmail.com> * Add ScottoMacrodeck Macropad (#20946) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * Add ScottoLong Keyboard (#20938) Co-authored-by: Ryan <fauxpark@gmail.com> * Add funtions of Encoder and VIA for redragon/k667 (#21917) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: syc <squall_sha@163.com> * [Keyboard] Add rpk-001 keyboard (#21042) Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: Joy <chang.li@westberrytech.com> * amend 68_(ansi|iso) community_layouts in keyboards/ (#21835) * [Keyboard] Add QCK-75 (#21180) Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Quarkeys Studio Z67 Solder Community Layout Support (#22095) * Quarkeys Studio Z67 Hotswap Community Layout Support (#22096) * kimiko: mirror encoder pins between halves (#21728) * Keychron q9 plus (#21399) Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * add dz60v2 keyboard (#21862) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * add odinmini layout (#21983) Co-authored-by: Ryan <fauxpark@gmail.com> * keymaps: Fix hacker_dvorak build. (#22102) * Allow for `qmk compile -kb all`. (#22022) * Royal Kludge RK G68 Community Layout Support (#22103) * Rename `LAYOUT` to `LAYOUT_65_ansi` [refactor] * Enable Community Layout support [enhancement] * Touch-up keymaps - fix keycode grid alignment [style] * Touch-up readme - link to maintainer's GitHub profile - specify codebase is for RGB version of RK G68 - update Hardware Availability links [docs] * Added OLED SSD1306 128x64 to the verified working table (#22112) * Shoc: physically arrange keymaps/layout macro (#22100) * Fix up `qmk mass-compile` makefile indenting. (#22115) * Add 'dactyl_tracer' keyboard (#20993) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * add subrezon/lancer keyboard (#20792) Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Daniel Osipishin <danielos@retarus.de> * [Keyboard] Add SIRIND Klein (#21951) Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: jack <0x6a73@protonmail.com> * GMMK2 96% ISO: Correct layout data (#22101) * Add reminder about format-json to PR Checklist (#22055) * Add Jank RP2040 Dactyl (#21973) Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * [Keyboard] Enable RGB_TEST animation on riot_pad (#22118) Co-authored-by: ShandonCodes <shandon@shandon.codes> * YMDK Melody96 Matrix Touch-Up (#22113) * Correct layout/matrix diagram Correct swapped designations for ANSI Backslash and ANSI Enter keys. [docs] * Correct matrix data Correct the matrix data for: - `LAYOUT_all` - `LAYOUT_96_ansi` - `LAYOUT_96_ansi_splitbs` which all had the matrix positions for ANSI Backslash and ANSI Enter swapped. [bugfix] * Implement `LAYOUT_hotswap` directly Implement `LAYOUT_hotswap` as its own layout, instead of aliasing it to `LAYOUT_96_ansi`. [bugfix] * Specify primary support for Soldered PCBs Current version of codebase primarily supports Soldered PCBs. [enhancement] [docs] * Update feature_rgblight.md (#21483) * Revert "Update feature_rgblight.md" (#22132) * included keyboard.h. To use is_keyboard_master with a split with an i… (#21571) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: tokky <tokky@localhost-live.attlocal.net> * Added Wyvern Hotswap by BredWorks (#21141) Co-authored-by: Neil Brian Ramirez <nightlykeyboards@gmail.com> Co-authored-by: Neil Brian Ramirez <nightlyboards@gmail.com> * Fix combo_ref_from_layer respect different default layer [#21780] (#21781) * Fix variable misspelling (#21774) * amend split_* community_layouts in keyboards (#21847) * amend 75_(ansi|iso) community_layouts in keyboards/ (#21837) * Add is0gr to QMK (#22024) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> * Document the RP2040-specific PS/2 implementation (#22079) Co-authored-by: Dasky <32983009+daskygit@users.noreply.github.com> * Bump tj-actions/changed-files from 38 to 39 (#21923) Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Add Palmetto PCB (#21955) * Add zoom98 (#22062) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Joel Challis <git@zvecr.com> * Added more rgb effects for rpk-001 keyboard (#22120) * Fix typo in oled_driver (#22134) betwen -> between * Fix entry into bootloader for STM32G431. (#22138) * Fix doc for programmable buttons. (#22136) Co-authored-by: Yanfei Guo <yguo@anl.gov> * rastersoft/minitkl layout corrections (#22130) * [Keyboard] Add spankbd, 3x5+3 split keyboard (#22003) * Initial support for CSTM80 (#22137) * Add support for YMD75 V4 - ISO (#22128) * Drop V2 production updates (#22147) * Allow inline generation of compile_commands.json while doing a `qmk compile`, using `--compiledb` (#21549) * Allow for `qmk mass-compile all:<keymap>` (#22116) Co-authored-by: Joel Challis <git@zvecr.com> * HnahKB Freyr Layout Additions (#22150) * Add layout/matrix diagram [docs] * Add `LAYOUT_tkl_ansi_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_ansi_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_ansi_tsangan` [enhancement] * Add `LAYOUT_tkl_ansi_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_ansi_wkl` [enhancement] * Add `LAYOUT_tkl_iso_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_iso_tsangan_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_iso_tsangan` [enhancement] * Add `LAYOUT_tkl_iso_wkl_split_bs_rshift` [enhancement] * Add `LAYOUT_tkl_iso_wkl` [enhancement] * Extend Community Layout support Add as supported layouts: - `tkl_ansi_split_bs_rshift` - `tkl_ansi_tsangan` - `tkl_ansi_tsangan_split_bs_rshift` - `tkl_iso_split_bs_rshift` - `tkl_iso_tsangan` - `tkl_iso_tsangan_split_bs_rshift` [enhancement] * Rura66 Layout Data (#22155) * Friendly-format `info.json` [style] * Update layout data - separate keyboard halves - add vertical stagger [refactor] * add linworks fave60 (#20796) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Add KB12 keyboard (#21605) Co-authored-by: Pablo Martínez <58857054+elpekenin@users.noreply.github.com> Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * 4pplet Eagle/Viper Rep Rev.A Layout Additions II (#22161) * teleport/native: switch from wrongly used user to kb function, boost matrix scan rate (#21172) * enable LTO * change from _user to _kb function * switch matrix io delay to nops, add opt=3 for higher scan rates * disable console which was enabled for testing but collides with endpoint used by VIA * switched from opt=3 to opt=2 * Update keyboards/teleport/native/native.c Co-authored-by: Joel Challis <git@zvecr.com> * slightly upped debounce, as some testers had chatter with async + default debounce --------- Co-authored-by: Joel Challis <git@zvecr.com> * Add Brutalv2 60 Keyboard (#22094) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * keyboards: Add support for Sofle Choc (#16736) Co-developed-by: Brian Low <github@brianlow.com> Co-developed-by: duese <duese@users.noreply.github.com> Co-authored-by: Thomas Weißschuh <thomas@t-8ch.de> * Remove rosetta instructions for Apple Silicon (#22174) * Bastard Keyboards: Add support for Dilemma Max (4x6_4) (#22064) * tentatively add dilemma 4x6_4 WIP untested PR by Casuanoob. Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * Miscellaneous fixes for recently merged keyboards (#22179) * Add Soulstone keyboard (#22093) * [Keyboard] Add SyenaKeyboards (#22168) Co-authored-by: Syenasweta <syenasweta@gmail.com> * Fix minimum python version references (#22191) * Added /handwired/ziyoulang_k3_mod (#21965) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * Add the Split67 keyboard PCB (#22107) Co-authored-by: “yuezp” <“yuezpchn@126.com”> * Monstargear XO87 Soldered: correct layout data (#22199) Correct key positions on the bottom row for `LAYOUT_tkl_ansi_tsangan`. [chore] * Add Acheron Themis and its variants (#22142) Co-authored-by: Drashna Jaelre <drashna@live.com> * Add keyboard Projectd/75/Projectd_75_ansi (#21628) Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: gksygithub <106651989+gksygithub@users.noreply.github.com> * [Keyboard] Add SP-111 v2 keyboard (#21652) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> * [Keyboard] Add qwertyqop60hs (#22164) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Added 3dp660 oled keyboard (#20591) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: xia0 <xiao@morgan.net.au> * Add Wave keyboard (#22054) Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * Add Keychron Q1 Version 2 (#20416) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: adophoxia <100170946+adophoxia@users.noreply.github.com> Co-authored-by: Adophoxia <andyao1528@gmail.com> * Add Line TKL keyboard (#22172) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Add printedpad keyboard (#21202) Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * Add `qmk ci-validate-aliases` (#22205) * Move orphaned Yugo-M files (#22211) Moves files that were left behind by #14996. [bugfix] * Klein_HS PCB support (#22203) * Update vid for printedpad (#22215) * Adding BriianPowell Discipline Keyboard Layout Updates (#21474) * Flag vial keymaps in 'qmk lint' (#22227) * Fix build error when Automatic Mouse Layer is enabled (#22229) * [Keyboard] vinhcatba/uncertainty (#21142) * vinh: test fw for uncertainty (deprecated) * v0.1: update base firmware with 2 layers, use bongo cat animation for oled * v0.1: change directory * v0.1: cleanup * v0.2: update layers * v0.3: add VIA support * v0.3: add VIA support (continue) * vinh: test fw for uncertainty (deprecated) * v0.1: update base firmware with 2 layers, use bongo cat animation for oled * v0.1: change directory * v0.1: cleanup * v0.2: update layers * v0.3: add VIA support * v0.3: add VIA support (continue) * v0.3: change keyboard name, remove eeprom config save in VIA keymap * cleanup for PR * update readme * vinh: test fw for uncertainty (deprecated) * v0.1: update base firmware with 2 layers, use bongo cat animation for oled * v0.1: change directory * v0.1: cleanup * v0.2: update layers * v0.3: add VIA support * v0.3: add VIA support (continue) * vinh: test fw for uncertainty (deprecated) * v0.1: update base firmware with 2 layers, use bongo cat animation for oled * v0.1: change directory * v0.1: cleanup * v0.3: change keyboard name, remove eeprom config save in VIA keymap * cleanup for PR * update readme * add license to header files, update ws2812 driver and DI_PIN to info.json * resovle PR suggestion for config.h, halconf.h, mcuconf.h * update info.json regarding PR comment * update bongo.h regarding PR comment * add oled mode toggle * update readme.md, rules.mk regarding PR comment * add submodule update * move oled handle to keyboard level * Update keyboards/vinhcatba/uncertainty/uncertainty.c forgot user-level proces_record * now using bongo as source file * Apply suggestions from code review remove default value codes * move WPM_ENABLE and ENCODER_MAP_ENABLE to keymap level * Apply suggestions from code review * Apply suggestions from code review * Update keyboards/vinhcatba/uncertainty/config.h * [Keyboard] Split-Cloud Handwired (#21327) * Added new handwired, the Split-Cloud * Minor changes to make clang-format happy * Alligned files with project standard. Trimmed midi out of the default layout, modified the readme, and removed unnecessary files. * Simplified default keymap further, changes to info.json * Moved image to imgur, simplified, and removed the unneeded rules.mk file * Update keyboards/handwired/split_cloud/readme.md Changed image in readme to Huge Thumbnail instead of Original. * Removed unneeded tri layer custom keycodes Now using the built-in functionality! * Update keyboards/handwired/split_cloud/readme.md Accidentally reverted this when making other changes * Fix typo in `docs/feature_tri_layer.md` (#22232) `Stes` -> `Sets` * [Keyboard] HorrorTroll Nyx (#21143) * Added support keyboard Nyx * Resolved zvarc suggested and lint error * Delete FORCE_NKRO due to problem with BIOS on mainboard * Resolved dunk2k suggested and limit more brightness, disable some RGB Effect * Resolved drashna suggested * Delete flower blooming effect and move to rev1 folder * Yampad add missing includes for CONVERT_TO (#22237) * Yampad add missing includes for CONVERT_TO (#22237) * Fix old usage of UNICODE_MODE_MAC (#22238) * [Keyboard] Add MIIIW BlackIO83 (#21970) * Add MIIIW BlackIO83 * Improve the code * Updated instructions for entering the bootloader * Update keyboards/miiiw/blackio83/rev_0100/config.h * Update keyboards/miiiw/blackio83/rev_0100/config.h * Update keyboards/miiiw/blackio83/config.h * Update config.h * [Keyboard] MonsGeek M3 (#20542) * Add keybord monsgeek m3. * Add keybord monsgeek m3. * Add keybord monsgeek m3. * updata rules.mk * add readme.md * delete monsgeek\m3\rgb_matrix_kb.inc * add DISABLE_M3_KEYCODES * user_config --> kb_config * Move code to info.json,and removed redundant features * Update keyboards/monsgeek/m3/info.json * Update keyboards/monsgeek/m3/info.json * Update readme.md * Update keyboards/monsgeek/m3/config.h * Update keyboards/monsgeek/m3/info.json * Update keyboards/monsgeek/m3/info.json * Update keyboards/monsgeek/m3/keymaps/default/keymap.c * Update keyboards/monsgeek/m3/keymaps/via/keymap.c * Update keyboards/monsgeek/m3/readme.md * Update m3.c * Update m3.c * Update info.json * Update keymap.c * Update keymap.c * Update config.h * Update keyboards/monsgeek/m3/readme.md * Update keyboards/monsgeek/m3/rules.mk * Update keyboards/monsgeek/m3/info.json * Update keyboards/monsgeek/m3/keymaps/default/keymap.c * Update keyboards/monsgeek/m3/keymaps/via/keymap.c * Update keyboards/monsgeek/m3/info.json * Update keyboards/monsgeek/m3/info.json * Update keyboards/monsgeek/m3/info.json * Update m3.c * Update keyboards/monsgeek/m3/info.json * Update keyboards/monsgeek/m3/m3.c * Update keymap.c replace the tabs with spaces * Update keymap.c replace the tabs with spaces * add missing gpio include for pointing motion pin (#22246) * [Keyboard] Hineybush H101 (#22186) * initial h101 commit * update keymap and add via support * update doc stuff * readme typo * updates * add indicator LEDs, needs testing * update readme * update USB VID/PID to match VIA json * Update keyboards/hineybush/h101/readme.md * Update keyboards/hineybush/h101/keymaps/default/keymap.c * Update keyboards/hineybush/h101/readme.md * Update keyboards/hineybush/h101/keymaps/via/keymap.c * updates from PR comments * updates per PR comments * idk why the folder is acting weird * maybe this will fix it * update to hopefully fix everything weird * keycode fixes * keymap updates * add 60_(ansi|iso)_wkl* community layouts (#21811) * add 60_(ansi|iso)_tsangan_wkl* layouts * Update keymap.c * `tsangan_wkl` to `wkl` * update info.json * split backspace changes * Apply suggestions from code review * Keyboard change blu/vimclutch to hardware revision B. (#22247) Co-authored-by: Ryan <fauxpark@gmail.com> * Add Ratio60 PCB (#21609) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: 4pplet <4pplet@protonmail.com> Co-authored-by: 4pplet <stefan.ess@gmail.com> * Add 62 key Dactyl Manuform (#21394) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Add `60_iso_tsangan_split_bs_rshift` Community Layout (#21812) * add 60_(ansi|iso)_tsangan_split_bs_shift layouts * shift to rshift * remove 60_ansi_tsangan_split_bs_rshift * Update layouts/default/60_iso_tsangan_split_bs_rshift/info.json * Kisakey (#22217) Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Ryan <fauxpark@gmail.com> * Reword mention of personal keymaps from PR checklist (#22258) * Add support for CSTC40 keyboard (#22154) Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: lesshonor and waffle87 Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: lesshonor Co-authored-by: itsvar <120035196+itsvar8@users.noreply.github.com> * [Keyboard] Add support for EnviousDesign keyboards (#17544) * Add support for Envious.Design Keyboards Add various RP2040 keyboards I've designed. * Fixed missing newlines at EOF. * Ran CLANG-FORMAT and sorted out any potential issues. * Gave keyboards all unique product IDs * Made requested changes. * removed all VIAL related code * sorted out license on all *.h or *.h files * removed outdated RESET Keycode * missed some VIAL bits * Made suggested changes * Made Suggested Changes * missed one file to change. * Attempted fix of CI issues * Update .gitmodules * Revert "Update .gitmodules" This reverts commit f4bace51621ed0c5bd40c729fa1c6339f665f0b7. * hopefully fixed all CI and QMK lint issues * resolve more CI errors and a couple typos * fixed last remaining issue as of now * made requested changes * further more on suggested change * Delete README.md * derpy workaround to change case of readme * finished up 65M firmware via does not work, I will investigate another time. * re-did a lot of 65M firmware bits, also fixed via for this board * corrected mistake in firmware * made suggested change to info.json for 65m/60F * finished 65M non via keymap and re-sorted via keymap * Update keyboards/enviousdesign/tkl/rgb/keymaps/default/keymap.c * Update keyboards/enviousdesign/tkl/rgb/keymaps/default/keymap.c * Apply suggestions from code review Verified updated Info.json works for aforementioned keyboards, * Follow-up commit with aforementioned suggested changes * Apply suggestions from code review correction to a couple typos pointed out. * follow-up removed some un-needed Readmes and corrected a mistake in 60F via keymap * Apply suggestions from code review * Added images of PCB to each Keyboard README * Apply suggestions from code review * Update keyboards/enviousdesign/60f/readme.md * Added missing aspects of info.json and corrected RGB_DI_PIN to WS2812_DI_PIN in RGB keyboard * made requested changes * Update config.h * used QMK migrate to update info.json * Apply suggestions from code review * Update keyboards/enviousdesign/65m/info.json * renamed named keyboards as suggested and added commission keyboard to repo * renamed file to hopefully please lint * renamed things to be all lower case since lint doesn't appear to look for upper case * updated keymap.c and removed unnecessary file * fixed readme and a couple other bits * converted various aspects to json information * attempt fix for lint error * fix some issues I overlooked * Apply suggestions from code review * moved some folders about as suggested * Made suggested changes * Apply suggestions from code review * removed outdated config.h * fixed errors in 65M and mini1800 * Apply suggestions from code review * Update keyboards/enviousdesign/delirium/rev1/info.json * Update keyboards/enviousdesign/65m/info.json * Apply suggestions from code review * [Keyboard] Inland V83P (#21725) * [Keyboard]add v83p keyboard. * Update keymap.c * Update keyboards/inland/v83p/keymaps/via/keymap.c * Update keyboards/inland/v83p/keymaps/default/keymap.c * Update keyboards/inland/v83p/config.h * Update keyboards/inland/v83p/info.json * Update info.json * Update keymap.c * Update keyboards/inland/v83p/mcuconf.h * Update keyboards/inland/v83p/halconf.h * Update keyboards/inland/v83p/info.json * Update keyboards/inland/v83p/v83p.c * Update keymap.c replace the tabs with spaces * Update keymap.c replace the tabs with spaces * Update keyboards/inland/v83p/info.json * [Keyboard] RPNeko65 by lendunistus (#21747) * initialise rpneko65, info.json * force NKRO * define WS2812 stuff and capitalise RPNeko65 * use RGBlight, add ANSI to keymap.c also remove _ADC suffixes from pins * basic readme plus making it so the info.json RGB values are actually recognised as integers * update repository URL * fix info.json formatting * caps lock LED implementation "borrowed" from waffling60 * put RGBLIGHT_ENABLE in json also remove "pin" from the rgblight option * add actually correct keymaps also reformat info.json * move to designer folder, add image to README * move keyboard to separate revision folder and remove erroneous tag from config.h * remove brightness/hue/saturation steps * change device version to 1.0 * move quantum.h include to top * actually, let's try a new image I also forgot to save the info.json file beforehand oops * Remove comma in info.json * Community layouts in info.json * Delete rpneko65/readme.md * Apply suggested changes to readme * Suggested code changes * Suggested imgur link * rename code file this was the issue all along sigh * Correct layer matching this time * Move Enter in info.json * README/info.json change * Another batch of suggestions * amend alice* community_layouts in keyboards (#21846) * add alice* to keyboards * add seigaiha * additions * Update info.json * revert wanderland * add tgr/alice * add matrix diagram.md * [Keyboard] Add Okayu (#22077) Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * Enable encoder map on navpad1.0 (#22266) * [Keyboard] jukaie/jk01 (#20573) * ADD Keyboard * Resolved requested changes * update keymap.c file * resolved requested changes * updated info.json file * Updated requested changes * Delete JK01.h file * Resolved requested changes * Delete readme.md * add rules.mk to default folder * Upload default/keymap.c * Add via/keymap.c * Updated info.Json file * Change VID in info.json * Resolved requested changes * Resolved requested changes. * Resolved requested changes * Updated changes --------- Co-authored-by: gksygithub <gskyGit@gsky.com.tw> * Fix typo in keychron v6 encoder map enable (#22272) * Allow for disabling of parallel processing of qmk find and `qmk mass-compile`. (#22160) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Fixup symbol sizing listing. (#22307) * [Keyboard] Add purin (#22306) * [Keyboard] Add QK100 (#21782) Co-authored-by: Drashna Jaelre <drashna@live.com> * Remove extra led_matrix_indicators_user call (#22329) * [Keyboard] Add LGBTKL (#22331) Co-authored-by: jack <0x6a73@protonmail.com> * Clarify PIO define is optional in docs. (#22339) * [Keyboard] Add Kaly42 (#22282) * Added Kaly/Kaly42 keyboard's minimal files. * Updated readme.md; New link and improved description text. * Apply suggestions from code review Added all suggestions given by @dunk2k Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Added community_layouts to info.json. Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> --------- Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * [Keyboard] add pisces pcb (#22334) * [Keyboard] Waffling60 Rev E ANSI Hotswap (#22270) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Add darkproject/kd87a_bfg_edition keyboard (#18981) Co-authored-by: gksygithub <106651989+gksygithub@users.noreply.github.com> * eason/aeroboard - Modify bootloader (#22286) * [Keyboard] doksin (#22220) * [Keyboard] Add Velvet hotswap & solder (#22284) * Flag more VIAL config options in lint (#22345) * Removed clueboard link as the website has been parked for some time (#22290) * [Keyboard] add enter67 keyboard (#22346) Co-authored-by: “yuezp” <“yuezpchn@126.com”> * Fix for swapped PID and VID (#22372) * Add Kindakeyboards Conone65 Via support (#22320) * [Keyboard] Add TeaQueen (#22352) Co-authored-by: jack <0x6a73@protonmail.com> * [Keyboard] Add Klein_SD (#22371) Co-authored-by: Joel Challis <git@zvecr.com> * boardsource/unicorne - Fixed OLED layers being all set to zero (#22389) * docs(rgblight): fix typos (#22399) * Teaqueen: correct layout data (#22406) * [Keyboard] Add Piantor Pro (#22361) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: jack <0x6a73@protonmail.com> * Red Herring PCB support (#22409) Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: jack <0x6a73@protonmail.com> * Add riblee handwired split keyboard (#22277) * [Keyboard] Add Duet Switch Tester (#22367) Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * [Keyboard] Add PCB Utopia88 (#22257) * Fix Herringbone pro Layouts (#22317) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Add iso85k keyboard (#22411) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Fix corne keylog (#22420) * [Keyboard] Fix bug in set_keylog function Fixes issue where some keys would not trigger the oled to output the row and column of a pressed key (would happen with LT(...) for my keymap) * [Keyboard] Tiny improvement to oled_render_keylog for crkbd Added improvement suggestion I got for another keyboard * Fix indicator LED definition for Sofle RGB. (#22408) * Update layer state of Lily58 from 'Default' to 'Base' (#22397) * Add SNES Macropad keyboard (#22377) Co-authored-by: jack <0x6a73@protonmail.com> * Update gregandcin/teaqueen (#22402) * [Keyboard] Add alpaca/wfeclipse (#22230) Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * Add Ploopy Madromys mouse (#21989) Added PloopyCo madromys/adept mouse Co-authored-by: Drashna Jaelre <drashna@live.com> * [Keyboard] Add MariOrion v2.5 (#22273) * Pushed MariOrion v2.5 to the branch. Prod and proto version added. * Pushed MariOrion v2.5 to the branch. Prod and proto version added. * Proper addition of layout options Addition of split bs rshift tsangan layout options. Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Merge branch 'toril940mariorion_v25' of github.com:toril940/qmk_firmware into toril940mariorion_v25 * Merge branch 'toril940mariorion_v25' of github.com:toril940/qmk_firmware into toril940mariorion_v25 * Update keyboards/mariorion_v25/proto/keymaps/via/keymap.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/proto/keymaps/default/keymap.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Updated readme.md with more information regarding make commands, and proto vs prod. * Update keyboards/mariorion_v25/prod/keymaps/via/keymap.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/prod/keymaps/default/keymap.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/prod/info.json Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Amended some changes to info.json - community layouts changed from scope to array. * Update keyboards/mariorion_v25/readme.md Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Revert keyboards/gray_studio/think65/solder/solder.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Revert keyboards/gray_studio/think65/solder/solder.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Revert keyboards/gray_studio/think65/solder/solder.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Removed via.json from the via keymaps. Replaced with matrix_diagram.md. via.json file moved off to [public mariorion_v25 repo](https://github.com/toril940/orion-v25) * Revert keyboards/gray_studio/think65/solder/solder.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Removed via.json from the via keymaps. Replaced with matrix_diagram.md. via.json file moved off to [public mariorion_v25 repo](https://github.com/toril940/orion-v25) * Update keyboards/mariorion_v25/proto/info.json Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/rules.mk Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/proto/info.json Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/proto/info.json Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/proto/info.json Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/prod/info.json Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/prod/info.json Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/prod/info.json Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/prod/info.json Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Revert keyboards/gray_studio/think65/solder/solder.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/matrix_diagram.md Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/readme.md Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/readme.md Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/readme.md Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/readme.md Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/readme.md Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/proto/mariorion_v25.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Update keyboards/mariorion_v25/prod/mariorion_v25.c Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Pushed new info.json and keymap.c files. * Pushed new info.json and keymap.c files. * Fixes to LED driver wrt PWM definitions with STM. * Update keyboards/mariorion_v25/prod/keymaps/via/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/prod/keymaps/via/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/prod/info.json Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/prod/mariorion_v25.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/proto/info.json Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/proto/config.h Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/proto/mariorion_v25.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/proto/mariorion_v25.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/proto/keymaps/via/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/proto/keymaps/via/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Committing a details update to readme.md. * Committing a details update to readme.md. * Update keyboards/mariorion_v25/prod/config.h Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/prod/mariorion_v25.c Co-authored-by: Ryan <fauxpark@gmail.com> * Revert "Committing a details update to readme.md." This reverts commit 068a82a1fcf1996d87f7f97a10e9f5fbbee79a29. * Committing a details update to readme.md. * Update keyboards/mariorion_v25/halconf.h Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/mcuconf.h Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/prod/config.h Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/proto/config.h Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mariorion_v25/halconf.h Co-authored-by: Ryan <fauxpark@gmail.com> * Production pictures replacing the standard ones in the readme.md :) * waffle87 requests bundled: - Licence headers added - Codeblocked matrix_diagram.md - Consolidated files where possible - Removed excess from config.h --------- Co-authored-by: toril940 <anastasialucas940@hotmail.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: Ryan <fauxpark@gmail.com> * Add `qmk license-check` developer-level CLI command. (#22075) * add 5087 keyboard (#20557) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * studiokestra/line_tkl: correct layout data (#22455) * fix `layouts` data * add EoF * [Keyboard] Fixes to make snes_macropad play nicer with qmk configurator (#22432) * [Keyboard] Change default implementation for get_layer_name_user Will now show the layer number instead of "Unknown", since this is what will be shown if QMK Configurator is used to compile the firmware. * [Keyboard] Update the layout info This makes it look sort of like a macropad + gamepad rather than an 4x6 ortholinear keyboard. * [Keyboard] Fix default implementation of get_layer_name_user Based on feedback from code review the implementation was swapped in favor of using get_u8_str. This implied a change to the argument type from int to uint8_t, which cascaded into the existing keymaps. (This made sense in general, since the return type of get_highest_layer is also a uint8_t.) * add `68_ansi` Community Layout to nebula68b (#22433) * Fix typos: key-modifer→key-modifier and interacton→interaction (#22464) * Bs equals (#21690) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: jack <0x6A73@pm.me> * Update stale.yml (#22473) * Update stale.yml * [Keyboard] Add Eden (#22467) Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * Add leonardo build target for leonardo + usb2.0 shield based projects (#22243) * [Keyboard] Add dnworks 997pt3 (#22466) Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * [Doc] Improve converter references (#21801) * [Keyboard] darkproject/kd83a_bfg_edition (#18416) * Add files via upload * [keyboard] * [Keyboard] * Delete flash_spi.c * Delete flash_spi.h * Delete wb32_spi_master.c * Delete wb32_spi_master.h * [Keyboard] * Resolved requested changes * Resolved requested changes * Changed rules.mk file accordingly. * Resolved changes accordingly. * Update config.h file and rules.mk file * Removed eeprom_flash.c file * Update default/keymap.c file * Delete keyboards/darkproject/kd83a_bfg_edition directory * Add keyboard * Add keyboard * Delete darkproject/kd83a_bfg_edition directory * Resolved Changes * Resolved requested changes * keyboard * Add keyboard * Delete keyboard * Add keyboard * Delete keyboards/darkproject/kd87a_bfg_edition directory * update keymap.c file * update via/keymap.c, config.h and kd83a_bfg_edition.c files * Delete keymap.c * Update via/keymap.c, config.h and kd83a_bfg_edition.c files * update config.h file * update keymap.c file * update keymap.c file * update config.h * update kd83a_bfg_edition.c * Resolved requested changes. * Delete folder which was added accidentally. * Update keyboards/darkproject/kd83a_bfg_edition/config.h * Update keyboards/darkproject/kd83a_bfg_edition/keymaps/via/keymap.c * Update keyboards/darkproject/kd83a_bfg_edition/keymaps/via/keymap.c * Update keyboards/darkproject/kd83a_bfg_edition/keymaps/via/keymap.c * Update keyboards/darkproject/kd83a_bfg_edition/keymaps/via/keymap.c * Update keyboards/darkproject/kd83a_bfg_edition/info.json * Update keyboards/darkproject/kd83a_bfg_edition/rules.mk * Update keyboards/darkproject/kd83a_bfg_edition/info.json * update info.json file * update config.h file * Updated requested changes * update readme.md * Resolved requested changes * Update info.json file * Delete kd83a_bfg_edition.h * Delete readme.md in default folder * Update info.json file * update info.json * Updated changes * Updated changes * Resolved requested changes * Resolved requested changes * DC60: Fix 2u Backspace Support (#22533) --------- Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: Lasse Luttermann <lasse.luttermann@gmail.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Andrew Kannan <andrew.kannan@klaviyo.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Idan Kamara <i@idank.me> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: Jay Greco <jayv.greco@gmail.com> Co-authored-by: Frank Ebel <git@ebel.page> Co-authored-by: ziptyze <mwcordier@gmail.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: temp4gh <temp4bbs@163.co…
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Description
LAYOUT_tkl_ansi_wkl_split_bs_rshiftLAYOUT_tkl_ansi_wklLAYOUT_tkl_iso_wkl_split_bs_rshiftLAYOUT_tkl_iso_wklCorrect key positioning on the function row.
cc @kopibeng (keyboard maintainer)
Types of Changes
Checklist