Skip to content

Commit

Permalink
add pcb rev 1.6 to en bom
Browse files Browse the repository at this point in the history
  • Loading branch information
LoQue90 committed Sep 2, 2024
1 parent da71d06 commit 7dafbfe
Showing 1 changed file with 28 additions and 20 deletions.
48 changes: 28 additions & 20 deletions en/bom.md
Original file line number Diff line number Diff line change
Expand Up @@ -102,35 +102,43 @@ Those accessories are definitely recommended. You might already have one or the
### Base Board for ESP32
This project uses a [custom designed Printed Circuit Board (PCB)](https://github.com/rancilio-pid/clevercoffee-hardware) for connecting all components of the PID. It mounts the ESP32 and some small passive electronics as well as screw terminals for connecting all required cables.

There is a new version of the PCB available. [Please request via our chat directly!](https://discord.com/invite/Kq5RFznuU4). **Please send a direct message to @loque**.
There is a now the revision 1.6 of the PCB available. You will find more information here: [ESP32 Platinen](./pcb/ESP32.md)

![PCB ESP32 Lieferumfang](../img/bestellliste/pcb_esp32_rev1_5_set_content.png)
**[On our Discord](https://discord.com/invite/Kq5RFznuU4) you could get a pcb set from LoQue via DM**.

Base board includes:
* The PCB
* Screw terminals
* Headers
* Adhesive PCB holders
![PCB ESP32 Lieferumfang](../img/bestellliste/pcb_esp32_rev1_6_set_content.png)

**Additionally**, the following components are required:

| Component | Description | Link |
| --- | --- | --- |
| C1 | 220µF (E-Cap) | [Link](https://www.reichelt.de/de/en/e-cap-radial-220-uf-10-v-105-c-low-esr-fm-a-220u-10-p200036.html) |
| C2 | 100nF (Ceramic capacitor) | [Link](https://www.reichelt.de/de/en/capacitor-100-nf-50-v-rm-5-125-c-hita-sf1h104z-l5-p246835.html) |
| R1 | 4,7kΩ (Resistor for display) | [Link](https://www.reichelt.de/de/en/metal-film-resistor-4-7-kohm-0204-0-4-w-1--yag-4fte52-4k7-p236963.html) |
| R2 | 4,7kΩ (Resistor for display) |[Link](https://www.reichelt.de/de/en/metal-film-resistor-4-7-kohm-0204-0-4-w-1--yag-4fte52-4k7-p236963.html)
| R3 | 47kΩ (Brew switch) | [Link](https://www.reichelt.de/de/en/metal-film-resistor-47-kohm-axial-0-4-w-1--vis-c4702fc100-p237115.html) |
| R4 | 47kΩ (Power switch) |[Link](https://www.reichelt.de/de/en/metal-film-resistor-47-kohm-axial-0-4-w-1--vis-c4702fc100-p237115.html) |
| R5 | 47kΩ (Steam switch) |[Link](https://www.reichelt.de/de/en/metal-film-resistor-47-kohm-axial-0-4-w-1--vis-c4702fc100-p237115.html) |
| R6 | As needed | Resistor based on LED used. For NeoPixel, e.g., no resistor is required but solder jumper JP1 is required. |
Base board set includes:
* 1x PCB
* 9x Screw terminals (2x 2-Pin, 3x 3-Pin, 2x 4-Pin, 1x 5-Pin, 1x 6-Pin)
* 2x 19-Pin-Headers female
* 1x 2x8-Pin-Header female
* 4x 3-Pin-Headers male
* 2x capacitors
* 7x resistors (1x 220Ω red, 2x 4,7kΩ green, 4x 47kΩ blue)
* 4x jumpers
* 4x adhesive PCB holders

Mind the correct polarity when soldering the E-cap!

<details markdown="block">
<summary>Parts for older pcb revisions</summary>

| Component | Description | Link |
| --- | --- | --- |
| C1 | 220µF (E-Cap) | [Link](https://www.reichelt.de/de/en/e-cap-radial-220-uf-10-v-105-c-low-esr-fm-a-220u-10-p200036.html) |
| C2 | 100nF (Ceramic capacitor) | [Link](https://www.reichelt.de/de/en/capacitor-100-nf-50-v-rm-5-125-c-hita-sf1h104z-l5-p246835.html) |
| R1 | 4,7kΩ (Resistor for display) | [Link](https://www.reichelt.de/de/en/metal-film-resistor-4-7-kohm-0204-0-4-w-1--yag-4fte52-4k7-p236963.html) |
| R2 | 4,7kΩ (Resistor for display) |[Link](https://www.reichelt.de/de/en/metal-film-resistor-4-7-kohm-0204-0-4-w-1--yag-4fte52-4k7-p236963.html)
| R3 | 47kΩ (Brew switch) | [Link](https://www.reichelt.de/de/en/metal-film-resistor-47-kohm-axial-0-4-w-1--vis-c4702fc100-p237115.html) |
| R4 | 47kΩ (Power switch) |[Link](https://www.reichelt.de/de/en/metal-film-resistor-47-kohm-axial-0-4-w-1--vis-c4702fc100-p237115.html) |
| R5 | 47kΩ (Steam switch) |[Link](https://www.reichelt.de/de/en/metal-film-resistor-47-kohm-axial-0-4-w-1--vis-c4702fc100-p237115.html) |
| R6 | As needed | Resistor based on LED used. For NeoPixel, e.g., no resistor is required but solder jumper JP1 is required. |
</details>

### Base Board For ESP8266

[Please request via our chat directly!](https://discord.com/invite/Kq5RFznuU4). **Please send a direct message to @loque**.
**[On our Discord](https://discord.com/invite/Kq5RFznuU4) you could get a pcb set from LoQue via DM**.

![Included items](../img/bestellliste/pcb_esp8266_rev1_1_set_content.jpeg)

Expand Down

0 comments on commit 7dafbfe

Please sign in to comment.